Noble House Home Furnishings ADIRONDACK CHAIR User manual

Assembly Instructions
ADIRONDACK CHAIR
Caution: You must read this before you proceed
Noble House Home Furnishings LLC
Page 1 OF 9
CAUTION : This Adirondack Chair is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving the Adirondack folding and to prevent damage to the
Adirondack Chair, two adults are needed to execute this action.
Please look underneath seat panel for hardware packs

Noble House Home Furnishings LLC
Page 2 OF 9
Label Picture
Description
QTY
B
Left Armrest
1
Parts List
Right Armrest
1
A
C
1
Folding Support Bar 2
D
E
F
Seat Panel
Backrest 1
1
Support Bar of Front Leg
Right Front Leg
Left Front Leg
G
H
1
1

Before Beginning Assembly:
Noble House Home Furnishings LLC
Page 3 OF 9
Label Picture Description QTY
1
2
5
Bolt (M x )6 35 mm
Allen Wrench
Screw ( M x )
4 30mm
Screwdriver
(Not provided)
5
3
4
6
Screw
mm ( M6x60 )
7
7
5
1
Hardware
1
(Use with Screwdriver)
5
7
7
5
1
1
Plastic Washer
(Ø6.5/Ø1 x2mm)8

FRONT FACING
OVERVIEW
Before Beginning Assembly:
This Adirondack Chair has multiple parts and may require up to 30 minutes
to assemble. To give you an overview of the Adirondack Chair parts, the
above picture is to help you put the various parts into perspective. Please
read through the instructions below to familiarise yourself with the parts
and steps before assembly.
Backrest (B)
Right (D) Armrest
Left (E) Armrest
Seat Panel (A)
Folding Support Bar (F)
Unpack and place all parts on a clean, non-marring surface.
Step 1
Noble House Home Furnishings LLC
Page 4 OF 9
Support Bar of Front Leg (C)
Right Front Leg (G)
Left Front Leg (H)

A
G
1
5
Step 3
Noble House Home Furnishings LLC
Page 5 OF 9
2
Step 2
G
H
C
H
Turn upside down Seat Panel(A) as shown in the picture.
Attach Pre-fixed Front Leg in Step 2 to Seat Panel (A) using Bolt ( 1 ),
Plastic Washer ( 2 ), and Allen Wrench ( 5 ).
Do not fully tighten Bolts
Note: The Plastic Washer should be placed between the Seat Panel
and Front Leg.
Attach Support Bar of Front Leg (C) to Right Front Leg (G) Left Front
Leg (H) and using Screws( 4 ) with Screwdriver ( 6 ).

Noble House Home Furnishings LLC
Page 6 OF 9
Step 5
5
A
G
F
1
2
Step 4
A
H
G
H
With the assistance of an adult partner, fold out the Right and Left Front Leg
as indicated by the arrow
Push the Wooden Pin through the Legs as pictured to Lock the Chair into
position.
Place the Frame in Step 4 in the position as picture above
Attach Folding Support Bar(G) to Seat Panel(A) using Bolt ( 1 ), Plastic
Washer ( 2 ), with Allen Wrench ( 6 ).
Do not fully tighten Bolts.
Note:Plastic Washer should be placed between Seat Panel and
Folding Support Bar.

Step 7
B
A
D
H
2
15
7.2
7.1
Noble House Home Furnishings LLC
Page 7 OF 9
G
C
5
3
A
F
B
Step 6
Position Backrest (B) with mortise into housing of Folding Support Bar (G)
Secure Folding Support Bar( F) to Backrest (B) using Screw ( 3 ) and
Allen Wrench ( 5 ) as shown above.
Do not fully tighten Screws
With the help of your adult partner, unfold the Backrest (B) from step 6, then:
7.1) Attach the Right Armrest (D) to Right Front Leg (G) by using Bolt ( ), Plastic ①
Washer ( 2 ) and Allen Wrench ( 5 ).
7.2) Secure Right Armrest (D) to Backrest (B) using Screw ( 3 ) and Allen Wrench ( ).
5
Do not fully tighten Bolts and Screws.
Note: Plastic Washer should be placed between Right Armrest and Right Front
Leg.
Repeat the same process with the Left Armrest (H).
In a sequential manner, tighten all Bolts and Screws at all joints until
fully locked into position.

To Fold
To Open
This Adirondack can be folded shut.
To fold: pull the Wooden Pins out of the Legs, then lift up the Backrest and
fold the Seat forward as indicated by the arrows, until the Adirondack folds
shut.
To open: pull the Backrest and Seat up as indicated by the arrows, then
insert the Wooden Pins through the Legs.
Note: This Adirondack Chair is heavy, always have a second adult to
assist whenever moving or lifting it.
Step 8
Noble House Home Furnishings LLC
Page 8 OF 9

Noble House Home Furnishings LLC
Page 9 OF 9
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish.
Children should not climb or jump on the furniture.
Do not write on furniture without a padded barrier to protect the surface.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
To obtain the longest lifespan of your outdoor products, minimizing exposure to direct
sunlight is recommended.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover
the product and /or place under patio or awnings.
Care & Maintenance