Noble House Home Furnishings Gazebo User manual

Gazebo
Caution: You must read this before you proceed
Read all instructions before assembling and using this product
1. Select ideal location. Set out all parts on a clear and level surface prior to assembly.
Ideally, the Gazebo should be set up in the desired location to avoid moving it after assembly.
2. Team Work. We recommend 4-5 adults and it may require 2 to 3 hours to fully assemble the
Gazebo. If possible, please use safety ladders.
3. Use caution. During the entire assembly process, especially when lifting heavy or large parts
or using ladders, pay attention to safety. No one other than the assistants should be allowed in
the work area.
4. Check all available parts. Before assembling your Gazebo Frame, make sure that you have all
the parts described in the Parts List.
5. Ensure that ALL BOLTS are fully and securely bolted in before you proceed to attach the
Canopies.
6. Keep children away. Children shouldn’t be allowed in the work area. Do not let them handle
parts and tools. Do not allow children to climb the Gazebo.
7. It is recommended that the curtain and mosquito netting be removed during strong windy
conditions.
1 oF 13
Assembly Instructions
Noble house Home Furnishings LLC

Parts List
Label Picture Description QTY
2 oF 13
Noble house Home Furnishings LLC
4
Long jacking tube
A
A1 4
Short jacking tube
B1 4
Long jacking
connector
C1
Jacking bracket
D1 2
Left short beam
D2 2
Right short beam
Left long beam
D3
D4
2
2
Right long beam
Post 4
E
F1
F2
4
4
G8
Short mosquito
net tube
G1 8
Long mosquito
net tube
H8
Connecting flat iron
I2
Central device
Upper beam
connector
Lower beam
connector

Hardware
Label
①
②
③
④
⑤
⑥
QTY
Description
Picture
M6*15
M6*60
M6*72
40
10
18
94
Wrench 2
8
3 oF 13
Noble house Home Furnishings LLC
Hanging Ring
Stake
J
K
1
1
Small Canopy
Large Canopy
4
4
Curtain
Mosquito Net
L
M
Plastic gasket
⑦18

E*4 D3*2
D4*2
D1*2
D2*2
A*4
A1*4
H*8
B1*4
F1*4
F2*4
C*1
I*2
G1*8 G*8
J*1 K*1
L*4 M*4
①*40 ②*10 ③*18
④*72 ⑤*2 ⑥*8
4 oF 13
Noble house Home Furnishings LLC
⑦*18
Assembly Preparation
Before beginning assembly

5 oF 13
Noble house Home Furnishings LLC
Assembly Steps
Overview
Step 1
Small Canopy (J)
Large Canopy (K)
Curtain (L)
Mosquito Net (M)
Post (E)
This Gazebo has multiple parts and may require up to 3 hours to assemble.To give you an
overview of the Gazebo parts, the above picture is to help you put the various parts
into perspective. Please read through the instructions below to familiarise yourself with the parts
and steps before assembly.
F1
F2
F1
F2
D3 D4
D1 D2
③
D1/D3 D2/D4
F1
F2 Fig.1
Fig.1
Fig.1
Connect the upper beam connector (F1) and the lower beam connector (F2) to the left beam
(D1/D3) and the right beam (D2/D4) with Bolts③,as shown in ( Fig. 1)

6 oF 13
Step 2
G
F1
F1
Fig. 2
Fig.2
Fig.3
F1
F2
Fig. 3
②
D1/D2/D3/D4
Fig.3
Noble house Home Furnishings LLC
D3 D4
D1 D2
D1/D3
D2/D4 G/G1
G/G1
G/G1
⑦
G
G1 G1
F1
D3 D4
G1 G1
G
F1
D1 D2
G
Fig.3 Fig.2 Fig.3
Insert the mosquito net tube (G/G1) into the upper beam connector (F1) as
shown in Fig. 2.
Connect the mosquito net tube (G/G1) and the beam (D1/D2/D3/D4) with the Bolt
②and Plastic Gaskets ⑦, as shown in Fig. 3.

7 oF 13
Step 3
Noble house Home Furnishings LLC
Fig. 4
①
G/G1
E
D3/D4
Fig. 5
①
E
D3/D4
H
D4
D3
D4
D3
E
E
E
E
H
H
H
H
F1
F2
F1
F2
Fig.4-Fig.5
①
Connect the beam (D3/D4) and the post (E) with the Bolts ①, as shown in Fig. 4.
Connect the beam (D3/D4) and the post (E) with the Bolts ①and the Connecting Flat
Iron (H), as shown in Fig. 5.
Fig.4-Fig.5

Step 4
Noble house Home Furnishings LLC
Fig. 6 Fig. 7
D4
D3
D4
D3
D1
D2
D2
D1
E
E
E
E
H
HH
H
HH
Fig. 6-Fig.7
F1
F2
F1
F2
F1
F2
F1
F2
G1
G
H
H
E
①
EH
G1
G
①
D2
D3
D2
D3
Connect the beam (D1/D2) and the post (E) with the Bolts ①, as shown in Figure 6.
Connect the beam (D1/D2) and the post (E) with the Bolts ①and the Connecting Flat
Iron (H), as shown in Figure 7.
Fig. 6-Fig.7
8 oF 13

9 oF 13
Step 5
Noble house Home Furnishings LLC
Fig. 9
Fig. 10-Fig.11
C
I
Fig. 8
I
C
A
D3
D4
D4
D3
D2
D1 D1
D2
A
A
A
A
E
E
E
E
H
H
H
H
B1
II
Fig. 8-Fig,9
B1
A
①
H
H
B1
E
Fig. 10 Fig. 11
B1
C
Insert the central device (I) into the jacking bracket (C) and connect it with the spring clip,
as shown in Fig.8.
Insert the long jacking tube (A) into the long jacking connector (B1) and connect it with
the spring clip, as shown in Fig.9.
Insert the long jacking tube (A) into the central device (I) and connect it with the spring clip,
as shown in Fig.10.
Connect the long jacking connector (B1) and the post (E) with the Bolts ①,
as shown in Fig.11.

10 oF 13
Step 6
Noble house Home Furnishings LLC
D3
D4
D4
D3
D2
D1
D1
D2
A
A
A
A
C
E
E
E
E
H
H
H
H
B1
A1
F1
F2
D3 D4
A1
A1
A1
A1
I
I
A1
C
A1
Fig. 12
Fig. 13
Fig.8
Fig.8
Put the short jacking tube (A1) into the jacking bracket (C) and connect it with the
spring clip, as shown in Fig. 12.
Insert the short jacking tube (A1) into the upper beam connector (F1) and
connect it with the spring clip, as shown in Figure 13.

11 oF 13
Step 7
Noble house Home Furnishings LLC
J
A
Fig.1 0.1
J
K
Fig.1 0.1
E
Fig.1 0.2
K
E
Fig.1 0.2
E
Put the small canopy cloth (J) on the top of the tent and put the top four corners
into the long jacking tube(A) (See Fig.10.1). Put the large canopy cloth (K) on the top
of the tent and put the four corners into the post (E), (see Fig.10.2).

12 oF 13
Step 8
Noble house Home Furnishings LLC
E
⑥
A
M
Fig.1 1.3
Fig.1 1.1
Fig.1 1.2
Fig.11.3
L
A
Small Canopy (J)
Large Canopy (K)
Curtain (L)
Mosquito Net ( M )
Post (E)
Fig.11.1-11.2
Connect the mosquito net (M) and the mosquito net pole (G/G1) with the
Hook ④, as shown in (Fig. 11.1).
Connect the curtain (L) and the mosquito net pole (G/G1) with the Hook ④, as
shown in (Fig. 11.2).
Insert the stake ⑥into the post (E), as shown in Fig. 11.3.
④
④
G1 G
G1 G

13 oF 13
Noble House Home Furnishings LLC
＆
Cautions:
1. Check stability and screw on the Bolts.
2. DO NOT tighten any Bolts fully and then move on towards the next one. Rather,
in a sequential manner, gradually tighten each Bolt until all Bolts are evenly secured.
This methodology will ensure maximum evenness once all Bolts are fully tightened.
3. Inspect it and make sure all parts are adequately connected.
4. Ensure all Bolts are fully locked into position.
5. This Gazebo can only be used on a flat, level surface.
Warning!! If the Gazebo is not Stable, it could lead to damage to the product, and
could cause injury to any occupants.