Noble House Home Furnishings LOUNGER User manual

1 OF 10
Caution: This Lounger is NOT a TOY.
Keep your child/children at bay during the assembly process.
Whenever lifting the Lounger and to prevent damage to the Lounger two adults
are needed to execute this action
LOUNGER

2 OF 10
2
2
Label
2
2
Middle Leg
Seat Panel Support Bar
First Leg
Foldable Seat Panel
Second Leg
Leg Support Bar
GFoldable Cushion

3 OF 10
Hardware
Bolt
(M6 x 20mm)
Bolt
(M6 x 35mm)
9
9
9
1
Washer
(M6/16x 1mm)
Allen Key
x9
x9
x9

4 OF 10
Assembly Steps
OVERVIEW
Before Beginning Assembly
Assembly Preparation
Step 1
Unpack and place all parts on clean, non-marring surface.
This Lounger has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Lounger parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Foldable Seat Panel (A)
Seat Panel Support Bar(B)
First Leg(C)
Second Leg(D)
Leg Support Bar(E)
Middle Leg (F)
Foldable Cushion (G)

5 OF 10
Assembly Steps
Step 2
Step 3
Unfold the Foldable Seat Panel(A) as indicated by the arrows.
Caution: Be careful when opening the Foldable Seat Panel(A) to avoid fingers
getting trapped or pinched.
Attach the Frist Leg© to the Foldable Seat Panel(A) using Bolt(①) and Washer(③)
with Allen Key(④) as shown in the picture.
Do not fully tighten the Bolt.
1
3
A
A
C
A

6 OF 10
Assembly Steps
Step 4
Step 5
Attach the Leg Support Bar(E) to First Leg(C) using Bolt(②) with Allen Key(④) as
shown in the picture.
Do not fully tighten the Bolt.
2
2
1
3
E
D
C
Repeat the same processes in Step 3 and Step 4 to attach Second Leg(D).
Do not fully tighten the Bolts.
4
4
4

7 OF 10
Assembly Steps
Step 7
Step 6
7.1) Attach the Seat Panel Support Bars(B) to Foldable Seat Panel(A) using Bolts(②)
with Allen Key(④).
7.2) Attach the Seat Panel Support Bars(B) to Leg Support Bars(E) using Bolts(②)
with Allen Key(④) as shown in the picture.
Do not fully tighten the Bolts.
2
E
D
C
B
B
Repeat the same processes in Step 3 and Step 4 to attach First Leg (C), Second
Leg(D) and Leg Support Bar(E).
Do not fully tighten the Bolts.
E
E
A
4
2
4
2
4
1
3
4
7.1
7.2

Step 9
Step 8
8 OF 10
F
Attach Middle Leg(F) to Foldable Seat Panel(A) using Bolts(①) and Washers(③)
with Allen Key(④) as pictured.
Do not fully tighten the Bolts.
Adjust height for balance Adjust low for balance
1
3
4
Adjust Pre-installed Levellers height for balance
EXERT pressure, floorwards, onto the Seat Panel.
This pressure will help the Legs and Seat Panel reach alignment at all joints.
In a sequential manner, gradually tighten all Bolts at all joints until evenly secured.
With assistance from your adult partners, turn the Lounger right side up.
Adjust the Pre-installed Levellers in Middle Leg(F) to desired height to avoid wobbles.
Assembly Steps
F

9 OF 10
Foldable Cushion (G)
Step 11
Step 10
Place Foldable Seat Cushion(G) on to the Lounge. Tie the strings of Foldable Seat
Cushion(G) to Foldable Seat Panel(A) as shown in picture above.
Align the Backrest of the Lounger in position you want as picture above.
Your Lounger is ready for use.
This Lounge can only be used on a flat, level surface.
Assembly Steps

10 OF 10
ü
ü
Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Do not write on furniture without a padded barrier to protect the surface.
Not for commercial use. For residential use only.
Dust and pick-up spills using a clean, non-colored, lint-free cloth.
Children should not climb or jump on the furniture.
To obtain the longest lifespan of your outdoor products, minimizing
exposure to direct sunlight is recommended.
To obtain the longest lifespan of your outdoor products, avoid extended
and lengthy exposure to rain, snow , and direct sunshine. Whenever
possible cover the product and /or place under patio or awnings.
Stains may be removed with mild soap soution and damp cloth.