Noble House Home Furnishings Sun Lounger User manual

Assembly Instructions
Caution: You must read this before you proceed
Sun Lounger
Please look in the First Support Leg for hardware packs.
Noble House Home Furnishings LLC
Page 1 of 22
Caution: This Sun Lounger is NOT a TOY
Keep your child/ children at bay during the assembly process.
Whenever lifting or moving the Sun Lounger and to prevent damage to the
Sun Lounger, two adults may be needed to execute these actions.

Label Picture Description QTY
ARight Foldable
Seat Panel 1
B Left Foldable
Seat Panel 1
CUpper Seat Bar 1
DLower Seat Bar 1
EFirst Leg 2
FSecond Leg 2
GFirst Support Leg 2
Part List
Noble House Home Furnishings LLC
Page 2 of 22

HSecond Support
Leg 2
ISecond Leg Bar 2
JFirst Leg Bar 2
KLong Top Bar 2
LShort Top Bar 2
Noble House Home Furnishings LLC
Page 3 of 22

MCushion 1
NCurtain 2
Label Picture Description QTY
①
Bolt (M6x30mm)
15
②
Bolt (M6x45mm)
5
③
Bolt (M6x70mm)
3
④
Sleeve Nut
(M6x15mm)
5
⑤
Screw
(M6x50mm)
9
⑥
Screw
(M6x65mm)
9
⑦
Screw
(M6x80mm)
9
⑧
Screw
(M6x100mm)
5
⑨
Allen Wrench
2
Hardware
Noble House Home Furnishings LLC
Page 4 of 22

Assembly Preparation
Before Beginning Assembly:
x15
x5
x3
x5
x9
x9
x9
x5
x2
Noble House Home Furnishings LLC
Page 5 of 22

Overview
This Sun Lounger has multiple parts and may require up to 70 minutes to assemble. To give
you an overview of the Sun Lounger parts, the above picture is to help you put the various
parts into perspective. Please read through the instructions below to familiarise yourself with
the parts and steps before assembly.
Assembly Steps
FRONT FACING
Upper Seat
Bar (C)
Cushion (M)
First Leg (E)
First Support
Leg (G) Lower Seat Bar (D)
Second Leg (F)
Right Foldable
Seat Panel (A)
Left Foldable
Seat Panel (B)
First Leg (E)
Second Leg (F)
Second Support Leg (H)
First Leg Bar (J) First Leg Bar (J)
Long Top Bar (K)
Second Leg Bar (I)
Second Leg Bar (I)
Long Top Bar (K)
Short Top Bar (L)
Curtains (N)
Noble House Home Furnishings LLC
Page 6 of 22

Step 1
Unpack and place all parts on a clean, non-marring surface.
Noble House Home Furnishings LLC
Page 7 of 22

Step 2
Place the Right Foldable Seat Panel (A), and the Left Foldable Seat Panel (B) face down onto
a clean, non-marring surface.
Attach the Upper Seat Bar (C) and the Lower Seat Bar (D) to the Right Foldable Seat Panel
(A) and Left Foldable Seat Panel (B) by using the Bolts (②), Screws (⑥) and the Allen
Wrench (⑨) as shown above.
Do not fully tighten the Bolts and Screws
Note: in this step, the side of the Lower Seat Bar (D) with the "Bottom" word will face
upwards.
A
B
C
D
6
9
2
9
This side, with the
"Bottom" word, will
face up to the sky
Noble House Home Furnishings LLC
Page 8 of 22

Step 3
Attach the First Legs (E), and the Second Legs (F) to the assembled part in step 2 with the
Bolts (
①
) and the Allen Wrench (
⑨
) as shown above.
Do not fully tighten the Bolts
9
1
1
1
1
9
E
E
F
F
Noble House Home Furnishings LLC
Page 9 of 22
9
9

4.2. Attach the Second Support Leg (H) to the assembled part in Step 3 by using the Bolts
(①), Sleeve Nuts (④) and the Allen Wrench (⑨) as shown above.
Do not fully tighten the Bolts
Step 4
4
1
9
4
3
9
9
H
G
Noble House Home Furnishings LLC
Page 10 of 22
9
4.2
4.1
4.1. Attach the First Support Leg (G) to the assembled part in Step 3 by using the Bolts (③),
Sleeve Nuts (④) and the Allen Wrench (⑨) as shown above.

Function 1: Sun Lounger without curtain
M
Adjust Pre-installed Levellers height for balance
Noble House Home Furnishings LLC
Page 11 of 22
5.1
5.2
5.1. With assistance from your adult partners, flip up the assembled part in Step 4 and lift the
headrest part of it to the desired position as shown above.
5.2. Put the Cushion (M) onto the Sun Lounger, then tie all the strings of the Cushion (M) to the Right
Foldable Seat Panel (A), and the Left Foldable Seat Panel (B) as shown above.
Place the Sun Lounger on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and gracefully, sit onto the Sun Lounger.
This will help align all the parts at all joint areas.
Then get off the Sun Lounger and proceed to tighten the Bolts and Screws in a sequential manner.
When tightening the Bolts and Screws, tighten sequentially.
DO NOT tighten any Bolts and Screws fully and then move on towards the next one.
If there are any wobbles after tightening, loosen the Bolts/Screws and execute this same process.
Adjust the Levellers until the Sun Lounger is level with the ground.
To adjust the Levellers, get assistance from an adult partner to lift/lean and hold the Sun Lounger
while you are working.
The Sun Lounger is ready to be used.
This Sun Lounger can only be used on a flat, level surface.

Function 2: Sun Lounger with Curtain
6.1. Untie all the strings of the Cushion (M) from the Right Foldable Seat Panel (A), and the
Left Foldable Seat Panel (B), then remove the Cushion (M) out of the Sun Lounger as shown
above.
6.2. Remove the Screw (
⑥
) at the upper hole of the Upper Seat Bar (C) and the Lower Seat
Bar (D) by using the Allen Wrench (
⑨
) as shown above.
6
9
Noble House Home Furnishings LLC
Page 12 of 22
6.1
6.2

With assistance from your adult partners, lower the headrest part of the assembled part in
Step 7.
Attach the Second Leg Bar (I) and the First Leg Bar (J) to the assembled part in step 6 by
using the Screws (⑧) and Screws (⑦) and the Allen Wrench (⑨) as shown above
Do not fully tighten the Screws
Step 7
I
I
J
J
9
8
9
7
Noble House Home Furnishings LLC
Page 13 of 22

Step 8
By taking the Step Ladders or the A-frame Ladders as well as with the assistance from your
adult partner, attach the Long Top Bar (K) and the Short Top Bar (L) to the assembled part in
Step 7 by using the Screws (⑤) and the Allen Wrench (⑨) as shown above
Do not fully tighten the Screws.
⑤
⑤
9
9
L
L
K
Page 14 of 22
Noble House Home Furnishings LLC

Step 9
9.1. With assistance from your adult partners, lift the headrest part of the Assembled part in
Step 8 to the desired position as shown above.
9.2. Put the Cushion (M) onto the Sun Lounger, then tie all the strings of the Cushion (M) to
the Right Foldable Seat Panel (A), and the Left Foldable Seat Panel (B) as shown above.
M
Noble House Home Furnishings LLC
Page 15 of 22
9.1
9.2

Step 10
By taking a Step Ladder or an A-frame Ladder as well as with the assistance from your adult partner,
put the two curtains (N) onto the Sun Lounger.
Tie all the strings of the Curtain (N) as shown above.
Place the Sun Lounger on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and gracefully, sit onto the Sun Lounger.
This will help align all the parts at all joint areas.
Then get off the Sun Lounger and proceed to tighten the Bolts and Screws in a sequential manner.
When tightening the Bolts and Screws, tighten sequentially.
DO NOT tighten any Bolts and Screws fully and then move on towards the next one.
If there are any wobbles after tightening, loosen the Bolts/Screws and execute this same process.
Adjust the Levellers until the Sun Lounger is level with the ground.
To adjust the Levellers, get assistance from an adult partner to lift/lean and hold the Sun Lounger
while you are working.
The Sun Lounger is ready to be used.
This Sun Lounger can only be used on a flat, level surface.
N
Adjust Pre-installed Levellers height for
Noble House Home Furnishings LLC
Page 16 of 22

Removing the curtain for using as a Sun Lounger without Curtain (Function
1)
By taking a Step Ladder or an A-frame Ladder as well as with assistance from your adult
partner, untie all the strings of the Curtain (N) and take the Curtain (N) off of the Sun Lounger
as shown above.
Noble House Home Furnishings LLC
Page 17 of 22
Step 11

By taking a Step Ladder or an A-frame Ladder as well as with assistance from your adult
partner, take the Long Top Bar (K) and the Short Top Bar (L) off of the assembled part in step
12 by using the Allen Wrench (
⑨
) to remove the Screws (
⑤
) as shown above
Step 13
With assistance from your adult partners, lower the headrest part of the Sun Lounger, then
untie all the strings of the Cushion (M) from the Right Foldable Seat Panel (A), and the Left
Foldable Seat Panel (B) before you take the Cushion (M) off of the Sun Lounger as shown
above.
Step 12
⑤
⑤
9
9
L
L
K
Noble House Home Furnishings LLC
Page 18 of 22

Step 14
With assistance from your adult partners, take the Second Leg Bars (I) and the First Leg Bars
(J) out of the assembled part in Step 13 by using the Allen Wrench (⑨) to remove the Screws
(⑧) and Screws (⑦) as shown above
I
I
J
J
9
8
Noble House Home Furnishings LLC
Page 19 of 22
7
9

Step 15
15.1. Insert the Screws (
⑥
) into the upper holes at the 4 corners of the Upper Seat Bar (C)
and the Lower Seat Bar (D) in the assembled part in Step 14 by using the Allen Wrench (
⑨
)
as shown above.
15.2. With assistance from your adult partner, lift the headrest part of to the desired position
as shown above.
Do not fully tighten any Screws
6
9
Noble House Home Furnishings LLC
Page 20 of 22
15.2
15.1