Noble House Home Furnishings RECLINING ADIRONDACK User manual

Assembly Instructions
Caution: You must read this before you proceed
CAUTION : This Adirondack is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving the Reclining Adirondack and to prevent damage to the
Reclining Adirondack, two adults are needed to execute this action.
Noble House Home Furnishings LLC Page 1 OF 10
RECLINING ADIRONDACK
Please look underneath of the seat panel for hardware packs

Label Picture Description QTY
A
B
C
D
E
F
G
Seat Panel with Footrest
Backrest
Right Front Leg
Support Bar of Front Leg
Left Armrest
Right Armrest
1
1
1
1
1
1
1
Parts List
Left Front Leg
Noble House Home Furnishings LLC Page 2 OF 10

Label Picture Description QTY
H
I
K
1
1
1
Parts List
Label Picture Description QTY
7
1
2
3
4
5
6
Bolt (M8x35)
Sleeve Nut (M8x15)
Long Screw (M7x70)
Short Screw (M7x40)
13
13
3
Allen Key
Screwdriver
Not provided
Screw (M4x30)
(Use with Screwdriver) 5
3
2
Recliner
Support Bar of Right
Armrest
Support Bar of Left
Armrest
Noble House Home Furnishings LLC Page 3 OF 10

Before Beginning Assembly:
Noble House Home Furnishings LLC Page 4 OF 10

Step 1
This Reclining Adirondack has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the Reclining Adirondack parts, the above
to help you put the various parts into perspective. Please read t hrough
the instructions below to familiarise yourself with the parts and steps before
assembly.
Unpack and place all parts on a clean, non-marring surface.
OVERVIEW
Backrest (B)
FRONT FACING
Recliner (K)
Support Bar of
Left Armrest (H)
Left Front Leg (C)
Left Armrest (F)
Footrest (A)
Right Front Leg (D)
Seat Panel (A)
Right Armrest (G)
Support Bar of
Left Armrest (I)
picture is
Noble House Home Furnishings LLC Page 5 OF 10

Step 2
Step 2
Step 3
Place the Seat Panel with Footrest(A) onto a clean, non-marring surface.
2.1) Remove pre-fixed holding bars of the Footrest that are inside Seat Panel
2.2) Pull the Footress out of the Seat Panel as indicated by the arrow .
Note: Please keep the screws and holding bars and put aside for Step 8
by using Screwdriver(⑦)
Attach Support Bar of Front Leg(E) to Left Front Leg(C) and Right Front Leg(D)
using Screws(⑤) with Screwdriver(⑦).
Footrest Step 2.2
Step 2.1
A
Pre-fixed Holding
Bars
7
7
5
D
C
E
Noble House Home Furnishings LLC Page 6 OF 10

Step 4
Step 5
Stand the Seat Panel(A) vertically as shown in the picture.
With the assistance of an adult helper, secure Front Leg Frame from Step 3 to
Seat Panel(A) using Bolts(①), and Sleeve Nuts(②) with Allen Keys(⑥).
Do not fully tighten the Bolts.
Place the Backrest(B) onto Seat Panel(A) as shown in the picture.
5.1) Secure Support Bar of Left Armrest(H) to Backrest(B) using Short Screw(④)
with Allen Key(⑦).
5.2) Secure Support Bar of Left Armrest(H) to Seat Panel(A) using Bolts(①),
and Sleeve Nuts(②) with Allen Keys(⑥).
Do not fully tighten Bolts and Screws.
Repeat the same process with the Support Bar of Right Armrest(I).
6
12
6
A
Step 5.2
Step 5.1
A
B
H
6
4
6
1
6
2
Noble House Home Furnishings LLC Page 7 OF 10

Step 6
Step 7
Position housing of Recliner(K) into oval mortise of Backrest(B).
Secure Recliner(K) to Backrest(B) using Long Screws(③) with Allen Key(⑥)
Do not fully tighten the Screws.
Attach Right Armrest(G) to Left Front Leg(C) and Support Bar of Left Armrest(H)
using Bolts(①), and Sleeve Nuts(②) with Allen Keys(⑥).
Do not fully tighten the Bolts.
Repeat the same process with Left Armrest(F).
K
B
36
G
H
6
1
6
2
Noble House Home Furnishings LLC Page 8 OF 10

Step 8
Step 9
Your Reclining Adirondack is ready for use.
This Adirondack can only be used on a flat, level surface.
The Footrest can be stored under the Seat Panel when not in use.
To Open, by hand, pull the Footrest outward and unfold the Footrest's Leg
To Store, by hand, fold the Footrest's Leg and push Footrest into under the Seat Panel
Reattach holding bars and screws from Step 2 to Footrest using Screwdriver(⑦).
The holding bars are to prevent the Footrest from falling out of the Seat Panel.
In a sequential manner, tighten all Bolts and Screws at all joints until fully locked
into position.
STORE
OPEN
7
Footrest
Holding Bar
Noble House Home Furnishings LLC Page 9 OF 10

Noble House Home Furnishings LLC Page 10 OF 10