Noctua NA-IS1-12 Sx2 User manual

NOCTUA NA-IS1-12 Sx2
INSTALLATION MANUAL
Scan this code to display multilingual manuals on your phone.
Designed to replace the fan’s stock NA-AVP1
anti-vibration pads, the NA-IS1-12 are compatible with
all current square-frame Noctua 120x25mm fans and
extremely straightforward to install:
For case fan applications, either the supplied self-tapping
screws or the included NA-AV3 anti-vibration
mounts can be used to sandwich the spacer between
the fan and the case panel. For radiator mounting, both
M3 and UNC 6-32 screws are supplied.
Case fan installation with NA-AV3
1
Included mounting parts:
2x NA-IS1-12 inlet spacers
8x NA-AV3
anti-vibrations mounts
8x NM-SFS4-BK
long fan screws
8x NM-SFS5-BK
radiator screws (M3)
8x NM-SFS6-BK
radiator screws (UNC)
2 Case fan installation with screws
3 Radiator installation

NOCTUA NA-IS1-12 Sx2
INSTALLATION MANUAL
Scan this code to display multilingual manuals on your phone.
Caution!
We supply both M3 thread (small head) and UNC 6-32
thread (bigger head) screws. Please make sure to select the
correct screw type for your radiator (refer to manufacturer
specifications or contact manufacturer)!
Warranty, support and FAQs!
Even with high-grade products and strict quality control,
the possibility of defects cannot be eliminated entirely.
Therefore, we aim at providing the highest possible
level of reliability and convenience by offering a
warranty period of 6 years and direct, fast and
straightforward RMA service.
Should you encounter any problems with your
NA-IS1-12 Sx2, please don’t hesitate to contact our support
team at [email protected].
Please also consult the FAQ section on our website:
www.noctua.at/faqs
M3 header is
smaller
35 mm
M3
UNC
35 mm
UNC 6-32 header
is bigger