Noctua NA-IS1-14 Sx2 User manual

NOCTUA NA-IS1-14 Sx2 chromax.black
INSTALLATION MANUAL
Scan this code to display multilingual manuals on your phone.
Designed to replace the fan’s stock NA-AVP1 anti-vibration
pads, the NA-IS1-14 are compatible with all current
square-frame Noctua 120x25mm fans and extremely
straightforward to install:
For case fan applications, either the supplied self-tapping
screws or the included NA-AV3 anti-vibration mounts
can be used to sandwich the spacer between the fan
and the case panel. For radiator mounting, both M3 and
UNC 6-32 screws are supplied.
Case fan installation with NA-AV3
1
Included mounting parts:
2x NA-IS1-12 inlet spacers
8x NA-AV3
anti-vibrations mounts
8x NM-SFS4-BK
long fan screws
8x NM-SFS5-BK
radiator screws (M3)
8x NM-SFS6-BK
radiator screws (UNC)
2Case fan installation with screws
3Radiator installation

NOCTUA NA-IS1-14 Sx2 chromax.black
INSTALLATION MANUAL
Scan this code to display multilingual manuals on your phone.
Caution!
We supply both M3 thread (small head) and UNC 6-32
thread (bigger head) screws. Please make sure to
select the correct screw type for your radiator (refer to
manufacturer specications or contact manufacturer)!
Warranty, support and FAQs!
Even with high-grade products and strict quality control,
the possibility of defects cannot be eliminated entirely.
Therefore, we aim at providing the highest possible
level of reliability and convenience by offering a
warranty period of 6 years and direct, fast and
straightforward RMA service.
Should you encounter any problems with your NA-IS1-14
Sx2, please don’t hesitate to contact our support team at
[email protected].
Please also consult the FAQ section on our website:
www.noctua.at/faqs
35 mm
M3
UNC
35 mm
M3 header is
smaller
UNC 6-32 header
is bigger