Nokia CA-100 User manual

1
English
Nokia Charger via USB port (CA-100)
The charger allows you to charge your Nokia device battery through
the USB port of a compatible computer.
Read this user guide carefully before using the charger. Also read the
user guide for your Nokia device, which provides important safety
and maintenance information, and the user guides for your
computer and operating system. Check www.nokia-asia.com/support
or your local Nokia website for the latest version of the user guide
and additional information.
The charger plug can be inserted into a 2.0-mm charger connector
of a compatible Nokia device.
To charge the battery of your Nokia device from your computer,
remove the cap from the top of the charger, plug the charger into the
USB port on your computer as instructed in the user guides for your
computer and operating system, and insert the charger plug into the
9255062_CA-100_1_en.fm Page 1 Thursday, October 12, 2006 10:20 AM

2
charger connector on the Nokia device. Ensure that the computer is
turned on. If the battery of the Nokia device is empty, it may take
several minutes before charging starts. If the computer enters the
stand-by or hibernation mode during charging, charging may stop.
After charging, unplug the charger plug from the Nokia device.
Charging the device battery from the computer increases the
demand on computer battery power and reduces the battery life.
To unplug the charger from the computer, proceed as instructed in
the user guides for your computer and operating system.
Care and maintenance
Your device is a product of superior design and craftsmanship and
should be treated with care. The following suggestions will help you
protect your warranty coverage.
• Keep all accessories and enhancements out of the reach of
small children.
9255062_CA-100_1_en.fm Page 2 Thursday, October 12, 2006 10:20 AM

3
English
• Keep the device dry. Precipitation, humidity, and all types of
liquids or moisture can contain minerals that will corrode
electronic circuits. If your device does get wet, allow it to dry
completely.
• Do not use or store the device in dusty, dirty areas. Its electronic
components can be damaged.
• Do not store the device in hot areas. High temperatures can
shorten the life of electronic devices and warp or melt certain
plastics.
• Do not store the device in cold areas. When the device returns
to its normal temperature, moisture can form inside the device
and damage electronic circuit boards.
• Do not drop, knock, or shake the device. Rough handling can
break internal circuit boards and fine mechanics.
9255062_CA-100_1_en.fm Page 3 Thursday, October 12, 2006 10:20 AM

4
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can prevent proper operation.
If the product is not working properly, take it to the nearest
authorized service facility for service.
© 2006 Nokia. All rights reserved.
Issue 1
9255062_CA-100_1_en.fm Page 4 Thursday, October 12, 2006 10:20 AM