Nokia 6288 - Cell Phone - WCDMA User manual

Quick Start Guide
Nokia 6288

Contents
1. Getting started 3
2. Using the handset 5
3. The UMTS network
and video calls 7
4. Using the camera 9
5. Picture and video
messaging (MMS) 10
6. Vodafone live! 13
7. Downloading 15
8. Other services and
functions 17
Disposal of mobile phones
You can dispose of your old
phone at any Swisscom sales outlet.
Swisscom actively pursues an
environmentally-friendly recycling
policy.

3
english
1. Getting started
In just a few minutes we’ll show you how easy it is to use
the features of your Nokia 6288.
1. Insert your SIM card and battery
Swing open the SIM card holder. Place your SIM card in
its socket (gold contacts facing down). Swing the holder
closed again and insert the battery (gold contact edge
first). Place the upper edge of the cover in place, and slide
it forward until it clicks shut.
2. Insert the Reduced Size Multimedia Card (MMC)
Swing open the card holder on the side of the handset.
Push the MMC card into its socket (gold contact edge
first) until it clicks, then close the holder. This enlarges
your mobile phone’s memory.
3. Turn it on
Press and hold the Power key on the top of the
handset. (You do the same to turn it off again.)
The battery may need charging (a full charge should
take at least 90 minutes).

4

5
english
2. Using the handset
Keys and navigation
Power key (on top of phone): Press and hold to turn your mobile phone
on and off. Press briefly to bring up the Profile menu (use this to select
Silent mode).
Send key: Starts or answers a call. Press (in standby mode) for Call Logs.
Soft keys: Press to choose whatever option is displayed in the bottom
left or right of the screen. In standby mode the left soft key opens Go to,
and the right one starts Vodafone live!
Navigation key: Press to select an item or open a folder. Press the key
sideways to navigate round menus, scroll through lists or play games.
It also opens whatever option is shown in the screen above it, so in stand-
by mode it opens the main Menu.
In standby mode, press the key to access Active Standby mode
(see next page), to open the Calendar, to open Contacts, and 
to write a new Text message.
End key: (During a call) Ends a call. At all other times takes you directly
back to the Standby screen.
Camera key (on the side of the phone): Press briefly for the camera,
and press and hold for the video recorder.

6
Volume keys (on the side of the phone): Press to adjust the call volume, or to zoom
in and out in camera mode.
Folders and applications: Press the key in standby mode to go to the main menu.
This is where all your folders and applications are stored. Use the navigation key
to move around them, and press it to open a folder or start an application. The Options
menu lets you move or rename folders and create new ones.
Active Standby mode: Press in standby mode to open Active Standby. This screen
lets you create notes, view and create calendar entries, turn on your Music player
or Radio, and easily access other applications. Use the navigation key to highlight the
application you want, then press to open it.
Marking selections: To select more than one item in a list (for deletion, say), highlight
each item you want to mark and press Options and then Mark. You’ll see a tick appear
beside each selected item.

7
english
3. The UMTS network and video calls
UMTS
The UMTS network supports faster data transmission and takes speed and service
availability to a new level.
Swisscom Mobile is introducing a variety of new services specifically for the UMTS
network. As well as being able to make and receive video calls, with Vodafone live!
you can also enjoy Live TV and Replay TV (see page 17).
UMTS service indicator
When the UMTS symbol appears next to the signal bars, you’ll be able to take advan-
tage of the faster, richer functions of the UMTS service. Of course, you’ll still be able to
use the existing network at other times.
The UMTS network is growing rapidly – check out www.swisscom-mobile.ch/umts
for more information on where the service is available.
Video calls
When the UMTS symbol appears you can make and receive video calls with your
Nokia 6288. The person you are calling must have a mobile phone that is compatible
with video telephony and be in a UMTS area too.

8
To make a call from standby mode, enter a phone number or press and select
a number from your Contacts list. Then select Options/Video Call. You’ll see your
caller’s camera view in the main screen, with your camera view in the top left corner
of the screen.
During a call, selecting Options brings up an option menu including turning off the
loudspeaker and muting the microphone.

9
english
4. Using the camera
With the built-in 2 megapixel digital zoom camera it’s easy to take photos and
video clips. You can send these to friends and family as a picture or video message
(MMS – see page 10).
Take and send a photo or video clip
1. Turn on the camera
Turn the phone sideways. To use the camera, press the camera key briefly. To use the
video recorder, press and hold the camera key .
Press the volume keys to zoom in or out, and press to switch between camera and
video modes. The Options menu lets you change the Settings for image quality
and video length, or choose sequence (multi-shot) mode and self-timer. You can also
use the inbuilt flash.
2. Take the photo or video clip
Press the camera key to take a picture or start recording a video clip (press Stop to
stop recording). It will be saved in the Images or Video clips sections of the My Items
folder in the main menu.
3. Send the photo or video clip
Press Play to see your video clip. To send your photo, press Send, or Options/Send
for a video clip. You can also add it to a picture or video message later (see page 10).
Press Options for other options, such as adding a photo or video to a contact.

10
5. Picture and video messaging (MMS)
With picture and video messaging (MMS) you can not only send text messages – you can
send pictures, video clips and sounds as well!
Create and send a message
1. Create a new message
In standby mode, press Menu/Messaging/Create message/Multimedia.
2. Enter the text
Press and choose Text. Write your message using the keypad. Press 0for a space,
Clear to delete, 1to cycle through common punctuation, and press and hold the *key
for all symbols. Press the Options key for the text Options menu.
Note: Press the #key to cycle through the Predictive ( ) and Multitap ( )
modes, in normal or lower-case. If words are underlined, press the *key to cycle through
alternative words. Press and hold a number key to enter that number, or press and hold
the #key to go to Numeric mode.
3. Add a photo or video clip
Press twice and select Image or Video clip. Choose the photo or video you want to
send, and then press Insert. You’ll now see it as part of your message.