Nokia 6300b RM-222 User manual

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
1
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
RM-217
Transceiver characteristics:
Band:
-RM-217: Tri-band EDGE phone for EGSM 900/1800/1900MHz
-RM-222: Tri-band EDGE phone for EGSM 850/1800/1900MHz
Camera: 2.0 Megapixel, 8x digital zoom
Display: 5.08cm (2inch) QVGA display with 16.7M true colors,
resolution 240 x 320 pixel
Operating System: Series 40
Bluetooth
FM stereo radio
Memory card: microSD
Connector: mini USB Connector
SERVICE MANUAL
Level 1&2
Environmental characteristics:
• Lead-free soldered
Transceiver with BL-4c Li-Ion battery pack
Talk time Standby Note
up to 3.5h up to 14.5days Depends on network
parameters
RM-222
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
2
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
CHANGE HISTORY
Status Version No. Date Comments
Draft 0.1 24.Nov.2006 Initial draft
Approved 1.0 9.Jan.2007 Approval
Approved 2.0 19.Apr.2007 Exploded view & Spare Parts overview updated
Approved 3.0 31.May.2007 Disassy/Assy instruction updated (microSD card removal first)
Approved 4.0 12.Sept.2007 Exploded view & Spare Parts overview updated
Page
TABLE OF CONTENTS
INTRODUCTION 3
EXPLODED VIEW 4
SPARE PARTS OVERVIEW 5
GENERAL RECYCLING RECOMMENDATION 6
LEVEL 2 SOLDER COMPONENTS 7
SERVICE DEVICES 8
SW-UPDATE 10
DISASSEMBLY - HINTS 11
ASSEMBLY - HINTS 18
LEGEND FOR QUICK TROUBLE SHOOTER 21
QUICK TROUBLE SHOOTER - POWER ON 22
QUICK TROUBLE SHOOTER - CHARGING 23
QUICK TROUBLE SHOOTER - NO SERVICE 24
QUICK TROUBLE SHOOTER - EARPIECE 25
QUICK TROUBLE SHOOTER - IHF SPEAKER 26
QUICK TROUBLE SHOOTER - DISPLAY 27
QUICK TROUBLE SHOOTER - MICROPHONE 28
QUICK TROUBLE SHOOTER - KEYMAT 29
QUICK TROUBLE SHOOTER - AV CONNECTOR 30
QUICK TROUBLE SHOOTER - VOLUME KEYS 31
QUICK TROUBLE SHOOTER - CARD READER 32
QUICK TROUBLE SHOOTER - CAMERA 33
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
3
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to
NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is
confidential. Please note that NOKIA provides also other guidance documents (e.g. Service Bulletins) for service sup-
pliers, follow these regularly and comply with the given instructions.
While every endeavor has been made to ensure the accuracy of this document, some errors may exist.
If you find any errors or if you have further suggestions, please notify NOKIA using the address below:
mailto:c[email protected]
Please keep in mind also that this documentation is continuously being updated and modified, so watch always out
for the newest version.
Warnings and Cautions
Please refer to the phone’s user guide for instructions relating to operation, care and maintenance including impor-
tant safety information. Note also the following:
Warnings:
CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS
AND ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR
OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHI-
CLE ELECTRONIC SYSTEMS TO RF ENERGY.
THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE
ATMOSPHERES, EG PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC.
OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLULAR TELEPHONES, MAY INTERFERE WITH
THE FUNCTIONALITY OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE MANUFACTUR-
ER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO
INTERFERENCE.
Cautions:
1. Servicing and alignment must be undertaken by qualified personnel only.
2. Ensure all work is carried out at an anti–static workstation and that an anti–static wrist strap is worn.
3. Use only approved components as specified in the parts list.
4. Ensure all components, modules screws and insulators are correctly re–fitted after servicing and alignment.
5. Ensure all cables and wires are repositioned correctly.
1.
2.
3.
Electrostatic discharge can easily damage the sensitive components of electronic products.
Therefore every Service Supplier has to take care of all precautions, which are mentioned in the
service level related “Service Partner Requirements”, available on NOKIA Online. Also see ESD
Protection Requirements in this Service Manual.
INTRODUCTION1.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
4
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL.
EXPLODED VIEW2.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
5
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
SPARE PARTS OVERVIEW3.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
6
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
GENERAL RECYCLING RECOMMENDATION4.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
7
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
LEVEL 2 SOLDER COMPONENTS5.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
8
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
FLS-5 incl. ACF-8, Driver and User Guide
Dongle and flash device incorporated into one package, devel-
oped specifically for POS use.
ACF-8
Universal Power Supply is used to power FLS-5.
Travel Charger AC-4
Small and lightweight charger for fast charging of your phone
battery.
Internal Battery BL-4c
Inserted under the back cover, this Li-Ion battery provides
power in a lightweight package.
SS-45
Camera removal tool.
DKE-2
Service Cable to connect the PC with the mini USB connector.
SS-101
Domesheet alignment jig
SERVICE DEVICES6.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
9
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
RJ-148
Soldering Jig
Lead-free Solder Wire
Mandatory for lead-free products (Level 2 only).
0772040 NMP Standard Toolkit (V2)
For more informations refer to the Service Bulletin (SB-011) on
NOKIA Online.
Supplier or manufacturer contacts for tool re-order can be
found in “Recommended service equipment” document on
NOKIA Online.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
10
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
SW-UPDATE7.
Flash Concept – (Point of Sales)
To use FLS-5 Flash Dongle you have to follow the user guide inside the sales package. Please check always for the
latest version of flash software, which is available on
NOKIA Online.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
11
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
DISASSEMBLY - HINTS8.
1. Needed tools: SRT-6, metal tweezers, SS-93, SS-45 camera
removal tool, a straight bladed screwdriver, dental pick, bit
holder with a torx plus size 6 bit, a torque driver, DC plug
2. Always cover the windows with a protective lm.
3. Shift out the C-COVER. 4. Note! Before disassembling the phone, make sure that
the micro SD card has been removed. Remove both screws in
the order shown.
5. Remove the screws. 6. Unlock the plastic clips of the A-COVER with the SRT-6…
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
12
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
7. …on both sides. 8. Lift up the cover now.
9. Remove the KEYMAT 10. Protect the window from inner side.
11. Unscrew the four screws in the order shown. 12. Remove the screws. Separate these screws, do not mismatch
them with the others.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
13
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
13. Cover the display with a lm. 14. Note! Before removing the B-COVER, make sure that the
micro SD card has been removed. Turn the assembly, lift up
the B-COVER.
15. Remove the CAMERA GASKET.
16. Unlock and remove the CAMERA with the SS-45.
17. Release the FLEX SHIELDING LID and discard it. 18. Do not use it again.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
14
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
19. Unlock both metal clips of the UI SHIELD. 20. Carefully unlock the ex connector of the LCD MODULE.
21. Peel up the protective lm. 22. Now separate the parts as shown.
23. Cover the display with a lm again. 24. Remove the MICROPHONE and the DC JACK.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
15
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
25. Carefully lever out the EARPIECE ASSEMBLY. 26. Carefully unlock the clip securing the PLASTIC CHAMBER.
27. Now remove it. 28. The IHF SPEAKER is not glued and can be removed easily.
29. Carefully release the clips of the LED- and the SIDE
WINDOW.
30. The POWER- and the VOLUME KEY can be removed easily.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
16
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
31. Release the shown metal snaps of the LABEL COVER ASSY
with the dental pick.
32. Turn the assembly and open the SIM lid.
33. Now release these two latches. 34. Use the dental tool to push out the last clips.
35. Release the LABEL COVER ASSEMBLY, beginning from the
bottom side.
36. Mind these clips.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
17
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
37. The disassembly procedure is now completed.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
18
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
ASSEMBLY - HINTS9.
1. Assembly hints: 2. Keep in mind that the LABEL COVER ASSEMBLY with the
TYPE LABEL must always be assembled together with the
corresponding engine module.
3. Insert the LABEL COVER ASSEMBLY into the B-COVER as shown. 4. Carefully push all latches into their places.
5. Close the SIM lid. 6. Check the correct positioning of all these latches.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
19
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
7. Insert the LED- and the SIDE- WINDOW. Note that they can’t
be interchanged.
8. Note that the IHF SPEAKER contacts belongs to their pads.
9. Secure all clips of the PLASTIC CHAMBER before going on. 10. Always use a new FLEX SHIELDING LID.
11. Mind the guiding tab while replacing the CAMERA. 12. Push it into its place.
WWW.PCBOOK.IR

Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL 12.Sept.2007
20
Service Manual 6300 RM-217/ 6300b RM-222 Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page (33)
13. Make sure that the microSD card is not inserted,
otherwise remove them.
14. Place the assembly onto the B-COVER.
15. Set the correct torque. 16. Turn the screws to the left rst to engage the threads, then
tighten them slightly.
17. Apply the correct torque to all screws in the order shown. 18. Tighten both screws of the C-COVER in the order shown, too.
WWW.PCBOOK.IR