Nokia COMMUNICATOR 9110 Instruction Manual

Nokia 9110 Communicator
18.10.99
Copyright 1995 – 1999 Nokia. All right reserved. 1(3)
THE QUICK GUIDE FOR MAKING A COMPUSERVE CONNECTION WITH
THE NOKIA 9110 COMMUNICATOR
CompuServe is a widely used Internet access and service provider. This is a Quick Guide on how to make an
Internet connection with the Nokia 9110 Communicator via CompuServe. Notice: a CompuServe Internet
account is needed for CompuServe access. For further information about Internet access from the Nokia
9110 Communicator, see the Nokia 9110 Communicator User’s Guide.
Please refer to the Communicator User's manual for instructions on operation, care and maintenance, including
important safety information.
Procedure for configuring the CompuServe connection
First, select the Internet application. Then, select Settings from the Internet application. After that, select
the Internet Access and Change button from the Settings menu. Press the New button.
The following information must be entered:
Provider name: CompuServe
Phone number: local CompuServe number provided by CompuServe
Nothing else is needed.

Copyright 1999 Nokia. All rights reserved. 2(3)
From the Advanced settings select the Login customisation option and press Change. Select New in the
pop-up box. Type in the script below. Notice: the username and the password are provided by CompuServe.
The script must be typed to the editor as it is written in this document.
__________The beginning of the Script_______
ABT "NO CARRIER" ABT BUSY
TOUT 25
"" /r
"" +
":" "CIS"
":" "username//GO:PPPCONNECT //NOINT"
":" "password"
_________End of the script_________
After typing the script press Close and type in the script's name, e.g. CompuServe.
Highlight the used Login customisation and press OK. Return to the first Internet menu by pressing Close
four times.
Procedure for filling in the Compuserve's mail settings on the Nokia 9110
Communicator
You can use the POP3 server for the mail settings. Usually the domain name for CompuServe is csi.com. The
settings are provided by the CompuServe provider.
First, select the Mail application from the Internet menu. Press the Settings button and highlight Remote
mailboxes and press Change. Press New and fill in the following data.
Remote mailbox name: your mailbox address assigned to you by your provider

Copyright 1999 Nokia. All rights reserved. 3(3)
Internet access: CompuServe
Sending settings:
Your e-mail address
Sending host
Receiving settings:
Your CompuServe username
Your CompuServe password
Receiving host
Remote mailbox protocol: POP3
After entering the information above press the Close button five times. Now the CompuServe Internet
access is ready to be used in the Nokia 9110 Communicator.
For more information on login scripts, see the script.txt file on the diskette supplied in the communicator
sales package.
For more information on configuring mail settings, see the Internet chapter of the Nokia 9110
Communicator User´s Guide.
Legal Notice
The contents of this document are copyright © 1999 Nokia Mobile Phones. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in any form without the prior written permission of
Nokia is prohibited.
Nokia is a registered trademark of the Nokia Corporation. Nokia's product names are either trademarks or registered trademarks of
Nokia. Other product and company names mentioned herein may be trademarks of their respective owners.
The contents of this document are provided "as is". Except as required by the applicable law, no warranty of any kind, either
express or implied, is made in relation to the accuracy, reliability or content of the document. Nokia reserves the right to revise
the document or withdraw it at any time without prior notice.
Nokia is not responsible for any loss of data, income or any consequential damage howsoever caused.