NordicTrack NETL12710.1 User manual

Serial Number
Decal
Model No. NETL12710.1
Serial No.
Write the serial number in the space
above for reference.
CAUT ON
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
QUEST ONS?
If you have questions, or if there are
missing parts, please contact us:
UK
Call: 08457 089 009
From reland: 053 92 36102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
CON Health & Fitness, Ltd.
c/o H Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5QJ
UK
AUSTRAL A
Call: 1-800-237-173
E-mail:
[email protected]
USERʼS MANUAL
www.iconeurope.com

TABLE OF CONTENTS
WARNINGDECALPLACEMENT..............................................................2
IMPORTANTPRECAUTIONS ................................................................3
BEFOREYOUBEGIN ......................................................................5
ASSEMBLY...............................................................................6
HOWTOUSETHECHESTPULSESENSOR...................................................14
OPERATIONANDAD USTMENT ............................................................16
HOWTOFOLDANDMOVETHETREADMILL ..................................................25
TROUBLESHOOTING .....................................................................26
EXERCISEGUIDELINES ...................................................................29
PARTLIST ..............................................................................30
EXPLODEDDRAWING ....................................................................32
ORDERINGREPLACEMENTPARTS ..................................................BackCover
RECYCLINGINFORMATION.........................................................BackCover
This drawing shows the locations
of the warning decals. f a decal
is missing or illegible, call the
telephone number on the front
cover of this manual and re-
quest a free replacement decal.
Apply the decal in the location
shown. Note: The decals may
not be shown at actual size.
WARN NG DECAL PLACEMENT
2
NordicTrack is a registered trademark of ICON IP, Inc.

3
1. Before beginning any exercise program, con-
sult your physician. This is especially impor-
tant for persons over age 35 or persons with
pre-existing health problems.
2. t is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
3. Use the treadmill only as described.
4. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and 2
ft. (0.6 m) on each side. Do not place the
treadmill on any surface that blocks air open-
ings. To protect the floor or carpet from dam-
age, place a mat under the treadmill.
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
7. Keep children under age 12 and pets away
from the treadmill at all times.
8. The treadmill should be used only by persons
weighing 350 lbs. (159 kg) or less.
9. Never allow more than one person on the
treadmill at a time.
10. Wear appropriate exercise clothes while
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended
for both men and women. Always wear ath-
letic shoes. Never use the treadmill with bare
feet, wearing only stockings, or in sandals.
11. When connecting the power cord (see page
16), plug the power cord into an earthed cir-
cuit. No other appliance should be on the
same circuit. When replacing the fuse in the
power cord adapter, insert an ASTA-approved
BS1362, 13-amp fuse into the fuse carrier.
12. f an extension cord is needed, use only a 3-
conductor, 14-gauge (1 mm2) cord that is no
longer than 5 ft. (1.5 m).
13. Keep the power cord away from heated sur-
faces.
14. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROU-
BLESHOOT NG on page 26 if the treadmill is
not working properly.)
15. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 18).
16. Never start the treadmill while you are stand-
ing on the walking belt. Always hold the
handrails while using the treadmill.
17. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
18. The pulse sensor is not a medical device.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
19. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and press the power switch
into the off position when the treadmill is not
in use. (See the drawing on page 5 for the lo-
cation of the power switch.)
WARN NG: To reduce the risk of serious injury, read all important precautions and in-
structions in this manual and all warnings on your treadmill before using your treadmill. CON as-
sumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
MPORTANT PRECAUT ONS

4
20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADM LL on page 25.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
21. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
22. Never insert any object into any opening on
the treadmill.
23. nspect and properly tighten all parts of the
treadmill regularly.
24. DANGER: Always unplug the power
cord immediately after use, before cleaning the
treadmill, and before performing the mainte-
nance and adjustment procedures described in
this manual. Never remove the motor hood un-
less instructed to do so by an authorized ser-
vice representative. Servicing other than the
procedures in this manual should be performed
by an authorized service representative only.
25. This treadmill is intended for in-home use
only. Do not use this treadmill in a commer-
cial, rental, or institutional setting.
26. Over exercising may result in serious injury
or death. f you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
SAVE THESE NSTRUCT ONS

5
Thank you for selecting the revolutionary NordicTrack®
T14.0 treadmill. The T14.0 treadmill offers an impres-
sive selection of features designed to make your work-
outs at home more enjoyable and effective. And when
youʼre not exercising, the unique treadmill can be
folded up, requiring less than half the floor space of
other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
ing this manual, please see the front cover of this man-
ual. To help us assist you, please note the product
model number and serial number before contacting us.
The model number and the location of the serial num-
ber decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
BEFORE YOU BEG N
Handrail
Upright
Accessory Tray
Key/Clip
Power Switch
Walking Belt
Platform Cushion
Foot Rail
Idler Roller
Adjustment Bolts
Console
Pulse Sensor
Book Holder

6
ASSEMBLY
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam-
aging parts, do not use power tools for assembly. Extra hardware may be included.
Base Foot Spacer
(36)–2
3/8" Star
Washer (11)–6
#8 x 1/2"
Screw (1)–14 #8 x 1" Tek Screw
(2)–4
3/8" Nut (10)–4
1/4" Star
Washer (12)–2
5/16" Star
Washer (9)–10
5/16" x 3/4"
Patch Bolt (5)–4
5/16" x 1 1/2"
Patch Bolt (4)–6
3/8" x 5 1/2" Patch Bolt (7)–2
1/4" x 1/2"
Patch Bolt (8)–6
3/8" x 2 1/4" Latch Patch Bolt (6)–1
3/8" x 2" Bolt (3)–1
1/4" x 1 3/4"
Patch Bolt (91)–2
3/8" x 3" Bolt (67)–2
3/8" x 2 1/4" Patch Bolt (31)–2
3/8" x 3 3/4" Patch Bolt (97)–2

7
2. Attach a Wheel (95) to the Base (94) with a 3/8"
x 3" Bolt (67), two Wheel Spacers (96), and a
3/8" Nut (10). Do not overtighten the Nut; the
Wheel must turn freely.
67
95
2
94
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (55) so that the treadmill is more stable;
do not fully fold the Frame yet.
Locate the Upright Wire (85), which is bundled
at the front of the Base (94). Remove the pack-
aging from the Upright Wire. Insert the Upright
Wire into the end of the Base and pull it out of
the indicated hole. If necessary, use the plastic
tie to pull the Upright Wire out of the hole.
Attach two Base Feet (92) and two Base Foot
Spacers (36) to the Base (94) in the locations
shown with two #8 x 1" Tek Screws (2).
Then, attach the other two Base Feet (92) with
two #8 x 1" Tek Screws (2).
See the inset drawing. Cut the plastic tie near
the Upright Wire (85).
1
94
2
92
92
2
2
2
92
92
85
Cut
85
Tie
Tie
55
36
36
10
96
96
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver , adjustable
wrench , needlenose pliers , and scissors .
Hole

8
4. Insert a 3/8" x 5 1/2" Patch Bolt (7), a 3/8" x
3 3/4" Patch Bolt (97), and a 3/8" x 2 1/4" Patch
Bolt (31) with three 3/8" Star Washers (11) into
the Right Upright (83) in the locations shown.
Hold the Right Upright (83) against the Base
(94). Be careful not to pinch the Upright Wire
(85). Partially tighten the 3/8" x 5 1/2" Patch Bolt
(7) and the 3/8" x 3 3/4" Patch Bolt (97) until the
heads of the Patch Bolts touch the Right
Upright; do not fully tighten the Patch Bolts
yet. Then, partially tighten the 3/8" x 2 1/4"
Patch Bolt (31).
83
3. Identify the Right Upright (83), which is marked
with a “Right” sticker. Have a second person
hold the Right Upright near the Base (94).
See the inset drawing. Tie the wire tie in the
Right Upright (83) securely around the end of
the Upright Wire (85). Then, pull the other end
of the wire tie until the Upright Wire is routed
completely through the Right Upright.
94
Wire Tie
85
83
3
Wire
Tie
83
85
85
4
85
11
7
11
94
31
97

6. Attach a Wheel (95) to the Base (94) with a 3/8"
x 3" Bolt (67), two Wheel Spacers (96), and a
3/8" Nut (10). Do not overtighten the Nut; the
Wheel must turn freely.
Attach the Base Cover (84) to the Base (94)
with four #8 x 1/2" Screws (1). Be careful not
to overtighten the Screws.
6
9
5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (55) so that the treadmill is more stable;
do not fully fold the Frame yet.
Insert a 3/8" x 5 1/2" Patch Bolt (7), a 3/8" x
3 3/4" Patch Bolt (97), and a 3/8" x 2 1/4" Patch
Bolt (31) with three 3/8" Star Washers (11) into
the Left Upright (82) in the locations shown.
Hold the Left Upright (82) against the Base (94).
Partially tighten the 3/8" x 5 1/2" Patch Bolt (7)
and the 3/8" x 3 3/4" Patch Bolt (97) until the
heads of the Patch Bolts touch the Left Upright;
do not fully tighten the Patch Bolts yet. Then,
partially tighten the 3/8" x 2 1/4" Patch Bolt (31).
5
82
97
731
11
55
11
84
94
1
1
1
67
95
10
96
96
94

10
7. Attach the Frame Crossbar (109) to the Frame
(55) with two 1/4" x 1 3/4" Patch Bolts (91).
With the help of a second person, tip the tread-
mill so that the Base (94) is flat on the floor.
55
109 91
8. Set the console assembly face down on a soft
surface to avoid scratching the console.
Identify the Right Handrail (79). Hold the Right
Handrail near the console assembly. Route the
console wire through the large holes in the top
and bottom of the Right Handrail.
Set the Right Handrail (79) on the Console
Frame (81). Start a 1/4" x 1/2" Patch Bolt (8)
with a 1/4" Star Washer (12) into the Right
Handrail. Then, start two 5/16" x 1 1/2" Patch
Bolts (4) with two 5/16" Star Washers (9) into
the Right Handrail. Make sure that the console
wire is not pinched. Do not tighten the three
Patch Bolts yet.
Attach the Left Handrail (not shown) as de-
scribed above. Note: There is not a wire on
the left side.
79
Console
Assembly
4
8
12
9
81
Console
Wire
8
91
94
7