Normann Rib User manual

Rib Cabinet
Assembly Instructions

1
Assembly Instructions Rib Cabinet
1
2
2
2
2
H1
H2
x1
x2
1
2
2
2
2

2
3
Assembly Instructions Rib Cabinet
1
2
2
2
2
2
1
2
2
2
2
2

4
Assembly Instructions Rib Cabinet
1Place your product in the nal position and
remove the top drawers. Loosen the screws
on the metal brackets just enough so that
the slotted bracket can be extended to meet
the wall.
3Mark the wall for drilling through the hole
in the short face of the bracket.
Then move the unit away from the wall so
that the marked holes can be drilled.
Ensure you use an appropriate xing type for
your wall (see page 5). Then return the unit
to its nal position
4Secure the unit to the wall xings with
own screws through the brackets.
5Finally add the extra securing screws (H1)
to the holes in the long faces of the brackets
and tighten.
WARNING Serious or fatal crushing injuries
can occur from furniture tipping over.
To prevent this furniture tipping over it must
be permanently xed to the wall.
2Then re-secure the screws.
1 2
34
5
H1

5
Assembly Instructions Rib Cabinet
H2
H2

5
Assembly Instructions Rib Cabinet
H2
H2
6

6
Assembly Instructions Rib Cabinet
A guide to wall mounting and xings
WARNING Serious or fatal crushing injuries can occur from furniture tipping over. To prevent this
furniture tipping over it must be permanently xed to the wall.
Wall xing screws are not included, since dierent wall materials require dierent types of screws/xings.
Please ensure you use the corrects screws/xings for your type of walls and seek professional advice if
you are not sure.
Failure of the product due to incorrect xings is the responsibility of the installer.
Important: When drilling into the walls always check that there are no hidden wires or pipes.
Types of walls
You can use one of the following types of wall plug if your walls are made of brick, breezeblock, concrete,
stone or wood
SAFETY Periodically check all ttings and wall xings to ensure they have not come loose and retighten
as neccessary.
1. General Purpose wall plug
Generally aerated blocks should not be used to support heavy loads,
use a specialist tting in this case. For light loads, general -
purpose wall plugs can be used.
2. Plasterboard wall plug
For use when attaching light loads on to plasterboard partitions.
3. Cavity Fixing wall plug
For use with plasterboard partitions or hollow wooden doors.
4. Cavity Fixing - Heavy Duty wall plug
For use when tting or supporting heavy loads such as shelving,
wall cabinets and coat racks.
5. Hammer Fixing wall plug
For use with walls stuck with plasterboard. The hammer xing allows
it to be xed to the wall rather than the plasterboard. Always check
the xing is secure to the retaining wall.
6. Shield Anchor wall plug - Heavy loads
For use with heavier loads such as TV and Hi-Fi speakers and satellite
dishes etc.
7