Courtyard Creations RTS735T User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
RTS735T
1
2
3
4
5
6
1
1
1
1
1
1
4
4
4
410
7
11
8
12
13
14
15
16
17
18
19
20
21
2
4
1
1
1
1
PARTS LIST
PAGE 1 OF 3
FIGURE 1
7
15
11
1
2
3
7
15
11
17EA1203-----23
17D03A040401-Y4
17KAA0201----Y4
17KAB1101----Y4
61R735TX00001BA
61R735TY00001BA
RTS735T-CS01-2
RTS735T-CS01-3
RTS735T-CS11-1
RTS735T-CS14-1
62RTS735TQ101
RTS735T-CS08-2
17C01A0706002Y4
17C03A0816041Y2
17C02A0709003Y4
RIGHT LEG
SUPPORT
SEAT POST
SEAT ASSEMBLY
BOLT M8*45
BOLT M6*16
BOLT M6*30
LEFT LEG WASHER
JAM NUT M8*1.25
HEX.KEY WRENCH 6MM
NUT WRENCH 10&13MM
BACK CUSHION
SEAT CUSHION
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
17C03A0814041Y2
BOLT M8*40
8
18000319004
BOLT CAP M8
4
18000337006
BOLT CAP M6
40
#7 BOLT M8*40
Step 1:
Fasten the seat post (#3) to the right leg (#1) and left leg (#2)
by using bolts (#7) and washers (#11). Keep the bolts loose.
See Figure 1.
Note:
1. The arrow marks attached on the seat post (#3) and legs
(#1 and #2) should coincide with Figure 1 to ensure proper
assembly.
2. The labels marked “L” and “R” on the legs (#1 and #2)
should coincide with Figure 1 to ensure proper assembly.
12
9
17FA08060601-Y4
WASHER d8.5*D17*1.6
R
L
STOP DON’T RETURN TO STORE!
!
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
Q’TY
PART
NO. MATERIAL CODE PART
SUPPORT FRAME BOLT CAP M6
18000337002 4
17FA05040301-Y4 4
WASHER d6.5*D13*1.0
COURTYARD CREATIONS INC.

#10 BOLT M8*45
45
4
1
2
8
5
5
6
3
16
8
16
PAGE 2 OF 3
Step 2:
Fasten the support (#4) to the right leg (#1) and the left leg
(#2) by using bolts (#8). Keep the bolts loose. See Figure 2.
Step 5:
Fasten the seat assembly (#5) to the seat post (#3) by using
bolts (#10), washers (#11 and #13) and jam nuts (#14). Make
sure that all of the bolts have been tightened completely and
cover them with bolt caps (#15, #16 and #17). See Figure 5.
FIGURE 2 FIGURE 3
FIGURE 4 FIGURE 5
11 11
11
14
1313
14
11
10
10
5
3
15 15
STOP DON’T RETURN TO STORE!
Step 4:
Please the seat assembly (#5) onto the seat post (#3).
See Figure 4.
9
17
17
9
12
12
#9 BOLT M6*16
16
Step 3:
Place the seat assembly (#5) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards. Fasten
the support frame (#6) to the seat assembly (#5) by using
bolts (#9) and washers (#12). See Figure 3.
#8 BOLT M6*30
30

PAGE 3 OF 3
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame or fabric parts.
• Cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery cleaner if
necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of your chair.
• In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected area during off
season periods.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
[email protected]
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
Warranty
• This product is covered by Courtyard Creations Inc. One–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer’s responsibility for freight and packing charges to and from over service center.
Step 6:
Place the cushions (#20 and #21) onto the chair. Secure the
cushions to the chair by using the plastic clamps.
See Figure 6.
20
21
FIGURE 6
STOP DON’T RETURN TO STORE!