Nortel Nortel 10 Dimensions

Nortel Page 1 of 4
Retirement Bulletin
Bulletin Number: R-2006-0293-Global
Date: 01 November 2006
Ethernet Switch Power Supply Unit 10 Manufacturing
Discontinue effective 1st November 2006
REVISION HISTORY
Date Revision # Summary of Changes
01 November 2006 Original bulletin This is the original publication
Customer Notification of the decision to manufacture discontinue the BayStack 10
Power Supply Unit and accessories
:
Last Time Order Date: 28 Feb 2007
Last Ship Date: 31 Mar 2007
Manufacture Discontinue (MD) Date: 01 November 2006
End of Life (EOL) Date: 31 Mar 2012
Last Supported Software Release: v3.00
Market Regions Affected: Global
Introduction
Effective 01 November 2006, the Nortel* Ethernet Switch Power Supply Unit 10
(formerly known as BayStack 10) and accessories are hereby declared
manufacturing discontinued. The last time order date is 28 Feb 2007 and the last
ship date is 31 Mar 2007. Customers are encouraged to purchase Ethernet Routing
Switch RPS 15 where possible.
Definition
Manufacture Discontinue (MD) – This notice serves as formal communication of
Nortel Networks’ intent to MD the product(s) noted. No further orders will be
accepted as of the Last Time Order Date shown above and no further shipments
made after the product has been discontinued. The MD of these products should
not be interpreted as the discontinuance of any Nortel Networks agreements to
support the existing field population. Services to the existing product base will
continue to be provided until the End of Life (EOL) date shown above.

Nortel Page 2 of 4
Product Overview (See Table for Detail)
The following order codes are being manufacturing discontinued.
Product Description Product Engineering
Code (PEC)
BayStack 10 136 W Redundant Power Supply module. +/-12 V and +5
V DC outputs for use with BayStack 450/410 and BayStack 100 series
products which currently use AA0005005.
AA0005009
BayStack 10 200 W Redundant Power Supply module. -48 V DC output
for use with products with modular DC to DC converter. AA0005010
BayStack 10 1400 VAC UPS/SNMP Controller Module, 110V North
American version (Japan not supported). To be used in place of
AA0005014 when UPS functionality is desired. (North America)
AA0005011
BayStack 10 1400 VAC UPS/SNMP Controller Module, 230V
International version (Japan not supported). To be used in place of
AA0005014 when UPS functionality is desired.
AA0005012
BayStack 10 Replacement Battery Pack for 1400 VAC UPS/SNMP
Controller Module (AA0005011 or AA0005012). Only necessary as a
replacement or spare. AA0005011 and AA0005012 include a Battery
Pack when shipped.
AA0005013
BayStack 10 SNMP Controller Module. One required per BayStack 10
system, if UPS/SNMP Controller Module (AA0005011 or AA0005012)
will not be used.
AA0005014
BayStack 10 Power Supply Unit. Modular power supply chassis,
accepting 136 W and 200 W Redundant Power Supply modules, and
1400 VA UPS module.
AA0005A08
BayStack 10 Power Supply Unit. Modular power supply chassis,
accepting 136 W and 200 W Redundant Power Supply modules, and
1400 VA UPS module. Requires either AA0005011, AA0005012, or
AA0005014. (Includes European Schuko power cord)
AA0005B08
BayStack 10 Power Supply Unit. Modular power supply chassis,
accepting 136 W and 200 W Redundant Power Supply modules, and
1400 VA UPS module. Requires either AA0005011, AA0005012, or
AA0005014. (Includes power cord used in the UK and Ireland)
AA0005C08
BayStack 10 Power Supply Unit. Modular power supply chassis,
accepting 136 W and 200 W Redundant Power Supply modules, and
1400 VA UPS module. Requires either AA0005011, AA0005012, or
AA0005014. (Includes power cord used in Japan)
AA0005D08
BayStack 10 Power Supply Unit. Modular power supply chassis,
accepting 136 W and 200 W Redundant Power Supply modules, and
1400 VA UPS module. Requires either AA0005011, AA0005012, or
AA0005014. (Includes North American power cord)
AA0005E08
BayStack 10 Power Supply Unit. Modular power supply chassis,
accepting 136 W and 200 W Redundant Power Supply modules, and
1400 VA UPS module. Requires either AA0005011, AA0005012, or
AA0005014. (Includes Australian power cord).
AA0005F08
Spare cable between BayStack 10 200W RPSU module and DC
module of the BayStack switch. (AA0005010 contains this cable.) AA0011030
BayStack 10 136 W Redundant Power Supply module. +/-12 V and +5
V DC outputs for use with BayStack 450/410 and BayStack 100 series
products which currently use AA0005005.
AA0005009
BayStack 10 200 W Redundant Power Supply module. -48 V DC output
for use with products with modular DC to DC converter. AA0005010
BayStack 10 1400 VAC UPS/SNMP Controller Module, 110V North
American version (Japan not supported). To be used in place of
AA0005014 when UPS functionality is desired. (North America)
AA0005011

Nortel Page 3 of 4
Software Dependencies
Release v3.0 will be the last major software version supported on Ethernet Switch
RPS 10.
Alternative/Replacement Products/Solutions
The Ethernet Routing Switch RPS 15 may be used instead of Ethernet Switch Power
Supply Unit 10 in most situations where redundant power is required. The RPS 15
provides power protection for Ethernet Switch 470, 470-PWR and Ethernet Routing
Switches 5510, 5520 and 5530, as well as Ethernet Services Unit 1400, 1450 and
1800. For the UPS (Uninterruptible Power Supply) functionality, a third party UPS
manufacturer should be contacted.
Replacement Product Description Replacement
Product
Engineering Code
(PEC)
Redundant Power Supply 15 - Chassis (Supports three power supplies). AA0005017-E5
Redundant Power Supply 15 - Connecting Cable for Single Ethernet
Routing Switch 5520, 5530 or Ethernet Switch 470-PWR. AA0005018 -E6
Redundant Power Supply 15 - 600 Watt Power Supply Module up to three
can be installed in RPSU15 chassis AA0005017. Requires separate
RPSU connection cable between PSU and switch. (No Power cord).
AA0005A19-E5
Redundant Power Supply 15 - 600 Watt Power Supply Module up to three
can be installed in RPSU15 chassis AA0005017. Requires separate
RPSU connection cable between PSU and switch. (EU Power cord
included).
AA0005B19-E5
Redundant Power Supply 15 - 600 Watt Power Supply Module up to three
can be installed in RPSU15 chassis AA0005017. Requires separate
RPSU connection cable between PSU and switch.(UK & Ireland Power
cord included).
AA0005C19-E5
Redundant Power Supply 15 - 600 Watt Power Supply Module up to three
can be installed in RPSU15 chassis AA0005017. Requires separate
RPSU connection cable between PSU and switch. (Japan Power cord
included).
AA0005D19-E5
Redundant Power Supply 15 - 600 Watt Power Supply Module up to three
can be installed in RPSU15 chassis AA0005017. Requires separate
RPSU connection cable between PSU and switch. (North American
Power cord included).
AA0005E19-E5
Redundant Power Supply 15 - 600 Watt Power Supply Module up to three
can be installed in RPSU15 chassis AA0005017. Requires separate
RPSU connection cable between PSU and switch. [EUED RoHS 5/6
compliant]. (Australian Power cord included also used in NZ)
AA0005F19-E5
Redundant Power Supply 15 Long Connecting Cable (7.6m/25ft) for up to
4 x Ethernet Routing Switch 5510, Ethernet Switch 470, Optera Metro
1200,400, 1450
AA0005020-E6
Redundant Power Supply 15 Short Connecting Cable (3m/10ft) for up to 4
x Ethernet Routing Switch 5510, Ethernet Switch 470, Optera Metro 1200,
1400, 1450.
AA0005021-E6
Redundant Power Supply 15 - Blank Panel for Chassis AA0005022
-48 V DC-to-DC converter, for installation in the Ethernet Routing Switch
5510-48T and 5510-24T AL1904007-E6

Nortel Page 4 of 4
Related Product and Sales & Marketing Bulletins (if applicable)
Refer to the Application Brief “Using the Nortel Redundant Power Supply 15” for the
replacement product Ethernet Routing Switch RPS 15.
http://www.nortel.com/products/01/rps/collateral/nn112360.pdf
Customer Actions
Customers are encouraged to migrate to Ethernet Routing Switch RPS 15.
*Nortel, the Nortel logo and the Globemark are trademarks of Nortel.
©2006 Nortel Networks Limited. All rights reserved. Nortel, the Nortel logo, and the Globemark design are trademarks of
Nortel Networks Limited. All other trademarks are the property of their respective owners.
The information in this document is subject to change without notice. Nortel reserves the right to make changes, without notice,
in equipment design as engineering or manufacturing methods may warrant. The statements, configurations, technical data,
and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied
warranty. Users must take full responsibility for their applications of any products specified in this document. The information in
this document is proprietary to Nortel Networks Limited.
To view the most recent version of this bulletin, please visit Nortel’s Partner Information Center on the web at:
http://www.nortel.com/pic.