Norton Cut-Off Wheels For Metal Fabrication User manual
www.nortonabrasives.com
The Choice for Every Metal Fabrication and
Light Construction Cut-Off Application:
Portable Grinder
Right Angle Grinder
Circular Saw
High-Speed Gas/Electric Saw
High-Speed Walk-Behind Road Saw
Stationary Machine
Rail Cut
Chop Saw
The Choice for Every Metal Fabrication and
Light Construction Cut-Off Application:
Portable Grinder
Right Angle Grinder
Circular Saw
High-Speed Gas/Electric Saw
High-Speed Walk-Behind Road Saw
Stationary Machine
Rail Cut
Chop Saw
NORTON ABRASIVES
CUT-OFF WHEELS FOR
METAL FABRICATION
Norton Cut-Off Wheel Line
The New Norton Cut-off Wheel Blotter
All important information is in the same location on most NorZon Plus, Charger Plus, Gemini and
Norton Metal and Masonry cut-off wheels for easy application identification and self-serve shopping.
Product Identification
Always in the same place:
• Brand logo
• Product name
• Extended description
i.e. Long Life and Free Cut
Trilingual Safety
Warning
The message will change
depending on the
intended application
of each particular
grinding product.
Product Tier
Left-hand background of
blotter identifies
performance tier
• GOLD – Best
•SILVER – Better
•BLACK – Good/Economy
ANSI / UAMA Symbol
It certifies that the grinding wheels
you buy have been designed and tested
according to the American National Standards
Institute safety requirements (ANSI B7.1). UAMA
is a voluntary association of grinding wheel
manufacturers organized for the promotion of safe and
efficient grinding practices.
Wheel Specific
Information
• Size – in US and metric
• Bar code
• “Smart” part number
• Max RPM speed
• Country of origin
• Icon indicating proper
grinding angle
Application Color Coding
The horizontal and vertical colored
bars indicate the material(s) that this
product can grind or cut:
RED – steel/metal
BLUE – stainless steel
GREEN – masonry
GREY – aluminum
YELLOW – foundry-specific materials
Diamond Marking System
A quick reference to performance
– higher number of diamonds
represents better performance grains
with faster cut rate and longer life than
those with lower diamond values.
Application Icons
Show material to be cut or
ground. Also can indicate if
grinding or cutting wheel is
iron-, sulphur-, or chlorine-
free with this symbol
Cut-off Wheel Starting Recommendations by Material
SMALL RIGHT ANGLE CIRCULAR PORTABLE GAS / STATIONARY
MATERIAL ANGLE GRINDERS GRINDERS SAWS ELECTRIC SAWS WALK BEHIND SAWS SAWS CHOP SAWS
Angle/Channel Iron NorZon Plus NorZon Plus RightCut Norton Metal Norton Metal — Charger Charger Long Life
Bar/Sheet Stock Gemini Long Life Gemini RightCut Gemini Long Life Gemini Long Life
Metal Studs/Tubing — NorZon Plus RightCut Norton Metal Norton Metal — Gemini Long Life Norton Steel Stud
Gemini RightCut
Cast Iron/Pipe Gemini Free Cut NorZon Plus RightCut Norton Metal Norton Metal — Gemini Free Cut Gemini Free Cut
Gemini RightCut
Stainless/Alloys NorZon Plus NorZon Plus RightCut Norton Metal Norton Metal — Charger Charger Free Cut
Charger RightCut
Aluminum/Brass/Bronze Gemini Free Cut Gemini RightCut Norton Metal Norton Metal — Gemini Free Cut Gemini Aluminum
Concrete/Brick/Block — — Norton Masonry Norton Concrete Norton Concrete Norton Masonry Norton Masonry
Asphalt/Green Concrete Norton Asphalt Norton Asphalt/
Green Concrete
Ductile Norton Ductile —
Fiberglass/Plastic Gemini Free Cut Gemini Rightcut Norton Metal — — Gemini Free Cut Gemini Free Cut
Paint/Rust
SPEC check
2
www.nortonabrasives.com
Cut-off Wheel Competitive Cross Reference
NORTON FLEXOVIT METABO SAIT 3M WALTER
FOR SMALL ANGLE OR IN-LINE PORTABLE GRINDERS (2"- 4")
NorZon Plus — — — Green Corps —
Charger FLEXON — SAITECH — —
Gemini Free Cut A36R Slicer A24R — A60-ZIP
Gemini Long Life A46T A 60 TZ A36T — A24-ZIP
FOR RIGHT ANGLE GRINDERS (4" — 9")
NorZon Plus RightCut — — — — —
Charger RightCut — — — — —
Gemini RightCut — — SAITECH .045 — A30-ZIP
FOR CIRCULAR SAWS (6" — 8")
Norton Metal A36TB38 A 30 S — — A30-ZIP
Norton Masonry C30UB64 C 30 S — — C-30
FOR PORTABLE GAS OR ELECTRIC SAWS (12" — 16")
Norton Metal A24TB A 24 N Brute — A24 Portacut
Norton Concrete AC24SB C 24 N C24R — C24 Portacut
Norton Ductile AC24SB AC 24 R Ductile — —
Norton Asphalt C16UB C 16 N Big M.A.C. — —
FOR WALK-BEHIND CONSTRUCTION SAWS (14", 18")
Norton Asphalt/ C16UB C 16 N C16 — —
Green Concrete
Norton Hot Press HPC16AG — Street Walker — —
Asphalt/Green Concrete
FOR STATIONARY SAWS (10" — 20")
Charger Free Cut — — — — —
Charger Long Life — — — — —
Gemini Free Cut A30RB A 30 R A24N — A24-FC RIPCUT
Gemini Long Life A30SB A 30 N A24R — A24-RIP
Norton Masonry C24SB C 30 S C24R — —
FOR CHOP SAWS (10" — 16")
Charger Free Cut — — SAITECH Steel Worker — —
Charger Long Life — — — — —
Gemini Free Cut A30RB A 30 R EZ-CHOP — A30 Chopcut II
Gemini Long Life A30SB A 30 S Iron Worker — A30-HC Chopcut
Gemini Aluminum — — Aluminum — A30-ALU Chopcut
Norton Masonry C30UB — — — —
Norton Steel Stud A30TB — Stud King — —
SPEC check
Troubleshooting Guide
PROBLEM POSSIBLE CAUSES SUGGESTED CORRECTION
Poor cutting rate Insufficient power used Increase feed or pressure to full power
Wheel too hard Use softer grade, Free Cut or thinner wheel
Contact area too large Reduce contact area
Wheel too coarse Use finer grit or Free Cut wheel
Wheel side out of truth Check spindle runout
Non-square cuts Work not clamped properly Check clamp and clean to remove swarf
Misaligned spindle bearings Check for bearing truth and alignment
Poor coolant distribution Ensure equal volume of coolant to each wheel side
Wheel is too hard Use softer acting wheel: softer grade, or finer grit, or Free Cut
Workpiece burn Insufficient feed rate Work machine to maximum power available
Poor coolant flow Increase volume and direct at cutting point
Wheel is too coarse Use finer grit or Free Cut wheel or more machine power
Wheel is too hard Use softer grade, thinner, or Free Cut wheel
Wheel is running out Check spindle and flanges
Wheel speed is too slow Ensure tight flanges and observe maximum speed on wheel
Poor finish Too much burr Use finer grit, or softer grade, or Free Cut wheel
Wheel too coarse Use finer grit or Free Cut wheel
Highest Productivity, Great Performance and Value
Typical Applications
•
Cutting sheet metal
•
Cutting pipe
•
Foundry/forge shops – gate/riser removal, cutting forgings
•
Metal plate dimensioning
•
Ship building – metal fabrication
•
Toolroom – cutting drill bits, steel bar, tubing, metallurgical sectioning
•
Construction – concrete/masonry work
3
Norton Cut-Off Wheel Line
FEATURES BENEFITS
• Advanced formulation • Free cutting
• Maximizes the performance of conventional aluminum oxide abrasive
• Gemini Free Cut wheels • Engineered to cut hard materials
• Gemini Long Life wheels • Excellent life and cut rate
Gemini Reinforced Cut-off Wheels – All purpose wheels, competitively pricedGOOD
Small Diameter Reinforced Cut-off Wheels (1-1/2" – 6")
DRILL
Drill Mount Mandrel for 2" – 3" Cut-off Wheels
This mandrel is used to safely mount 2" – 3" diameter cut-off wheels with 3/8" arbor holes on
to a drill.
STD PKG SPEC. UPC NO.
5 DRILL-MOUNT MANDREL FOR 2" AND 3" 3/8" HOLE CUT-OFF WHEELS 07660747769
EXAMPLE: CO 4 18 38 G FC
WHEEL TYPE DIAMETER THICKNESS HUB/HOLE SIZE PRODUCT GROUP MODIFIER
CO = CUT-OFF 4= 4" 18 = 1/8" 38 = 3/8" G= GEMINI FC = FREE CUT, LL = LONG LIFE
Cut-off Wheel Part Number Key
HORIZONTAL/STRAIGHT SHAFT
GRINDER
FEATURES BENEFITS
• Patented Norton SG (ceramic alumina) / NorZon • Fastest initial cut of any wheel; highest productivity
(zirconia alumina) grain combination
• Highly advanced bond system • Free, cool cut
• State-of-the-art manufacturing • Superior wheel balance
• NORZON Plus • Up to 3X life over aluminum oxide wheels on carbon steel,
stainless and cast iron
• 40% faster cut rate over standard aluminum oxide wheels
• NORZON Plus Long Life • Up to 5X life on harder metals and exotic metals
BEST NorZon Plus Reinforced Cut-off Wheels – Fastest initial cut rate
FEATURES BENEFITS
• A unique blend of premium NorZon (zirconia alumina) • 2X the life of aluminum oxide wheels
and aluminum oxide • Free cutting
•
Effectively cuts a variety of metals from alloys and stainless to gray iron
• Long life and economical performance to price ratio lower total cost
• Superior product at a value price
BETTER Charger Reinforced Cut-off Wheels – Versatile; ideal for stainless steel
FEATURES BENEFITS
ALUMINUM OXIDE — OBNA2 WHEELS
• Side reinforced, resin bond • Yield maximum cut rate and minimum kerf loss; ideal when
thin cut is desired
ALUMINUM OXIDE — B25N WHEELS
• Constructed with full diameter side reinforcing; • Versatile: durable, free cutting; offer greatest stiffness
resin bond
BETTER Small Diameter Engineered Reinforced Cut-off Wheels – Precise, thin cuts
STEEL/METAL
STAINLESS
MASONRY
ALUMINUM
4
www.nortonabrasives.com
GOOD
GEMINI, NORTON METAL
BETTER
BEST
NORZON PLUS
Highest Productivity, Great Performance and Value
SIZE: D X T X H MAX RPM STD PKG SPEC/PART NO. UPC NO. SPEC/PART NO. UPC NO. PART NO. UPC NO.
TYPE 01 FLAT CUT-OFF – STEEL / STAINLESS
1-1/2 X .035 X 1/16 40,745 25 A60-OBNA2 66243427764
1-1/2 X .035 X 1/8 40,745 25 A60-OBNA2 66243427831
1-1/2 X .035 X 1/4 40,745 25 A60-OBNA2 66243427875
1-1/2 X .060 X 1/8 40,745 25 A60-OBNA2 66243427876
2 X .035 X 1/8 30,560 25 A60-OBNA2 66243428020 CO203518G 66243411392
2 X .035 X 1/4 30,560 25 A60-OBNA2 66243428014 CO203514G 66243411393
2 X .035 X 3/8 30,560 25 CO203538G 66243411394
2 X .060 X 1/8 30,560 25 A60-OBNA2 66243428041
2 X .060 X 1/4 30,560 25 A60-OBNA2 66243427993
2 X 1/16 X 1/4 30,560 25 CO211614G 66243411395
2 X 1/16 X 3/8 30,560 25 CO211638G 66243411396
2 X 1/8 X 1/4 30,560 25 CO21814G 66243411402
2 X 1/8 X 3/8 30,560 25 CO21838G 66243411403
2-1/2 X .035 X 1/8 30,560 25 A60-OBNA2 66243528476
2-1/2 X .035 X 1/4 30,560 25 A60-OBNA2 66243528425
2-1/2 X 1/16 X 1/4 30,560 25 CO2511614G 66243510640
2-1/2 X 1/16 X 3/8 30,560 25 57A701-TB25N 66243522372 CO2511638G 66243510641
3 X .035 X 1/4 25,465 25 CO303514NZP 66243510668 A60-OBNA2 66243528573 CO303514GFC 66243510627
CO303514GLL 66243537270
3 X .035 X 3/8 25,465 25 CO303538NZP 66243510669 23A601-QBNA2 66243528629 CO303538GFC 66243510628
A60-OBNA2 66243528574 CO303538GLL 66243537271
CO3035CH 66243527753
3 X .060 X 1/4 25,465 25 A60-OBNA2 66243528471
3 X .060 X 3/8 25,465 25 A60-OBNA2 66243528552
3 X 1/16 X 1/4 25,465 25 CO311614NZP 66243510670 57A364-TB25N 66243522395 CO311614GFC 66243510645
CO311614NZPLL 66243510834 57A601-TB25N 66243522398 CO311614GLL 66243510649
3 X 1/16 X 3/8 25,465 25 CO311638NZP 66243510671 57A364-TB25N 66243522399 CO311638GFC 66243510647
25 CO311638NZPLL 66243510835 57A601-TB25N 66243522401 CO311638GLL 66243510648
25 U57A364-VB25N 66243528674
25 CO3116CH 66243527755
50 Z36-TB50N 66243528812
3 X 1/16 X 3/8 25,465 25* METAL FREE CUT 07660747767
CONTRACTOR 5 PACK
3 X 1/8 X 1/4 25,465 25 CO31814GFC 66243510650
CO31814GLL 66243510652
3 X 1/8 X 3/8 25,465 25 CO31838NZP 66243510673 CO31838GFC 66243510651\
CO31838GLL 66243510653
4 X .035 X 1/4 19,100 25 CO403514NZP 66243510674 A60-OBNA2 66243529606 CO403514GFC 66243510629
CO403514GLL 66243537272
4 X .035 X 3/8 19,100 25 CO403538NZP 66243510675 A60-OBNA2 66243529621 CO403538GFC 66243510630
CO4035CH 66243527340 CO403538GLL 66243537273
4 X .035 X 1/2 19,100 25 A60-OBNA2 66243529622
4 X .035 X 3/4 19,100 25 A60-OBNA2 66243529609
4 X .040 X 3/8 19,100 25 A60-OBNA2 66243529516
4 X .060 X 3/8 19,100 25 A60-OBNA2 66243529604
4 X 1/16 X 1/4 19,100 25 CO411614NZP 66243510676 CO411614GFC 66243510654
4 X 1/16 X 3/8 19,100 25 CO411638NZP 66243510677 57A364-TB25N 66243522500 CO411638GFC 66243510655
25 CO411638NZPLL 66243510839 CO4116CH 66243527338 CO411638GLL 66243510657
25 U57A364-VB25N 66243529594
50 U57A364-TB65N 66243517454
4 X 1/16 X 1/2 19,100 25 57A364-TB25N 66243522502
4 X 1/8 X 1/4 19,100 25 CO41814GFC 66243510658
4 X 1/8 X 3/8 19,100 25 CO41838NZP 66243510841 57A364-TB25N 66243522505 CO41838GFC 66243510659
CO41838NZPLL 66243510680 CO418CH 66243527339 CO41838GLL 66243510661
5 X .035 X 3/8 12,225 25 A60-OBNA2 66252830653
6 X .035 X 3/8 10,190 25 A60-OBNA2 66252835064
*5 WHEELS PER CONTRACTOR PACK, 5 CONTRACTOR PACKS PER STANDARD PACKAGE
5
HORIZONTAL/STRAIGHT SHAFT
GRINDER
Norton Cut-Off Wheel Line
❚❚Contact your machine vendor for proper flanges and guards when using Type 01 wheels on right angle grinders.
❚❚Use Type 01 when proper cut-off guard and equal size flanges are available.
❚❚Use Type 27 with standard back flange and nut tool configuration.
It is the user’s responsibility to refer to and comply with ANSI B7.1
Right Angle Grinder Reinforced Cut-off Wheels –
Type 01 (4" – 7") and Type 27 (4" – 9")
FEATURES BENEFITS
• Durable zirconia alumina abrasive • 3X the life and 2X the cut rate of standard aluminum oxide wheels
• Excels on a broad range of materials, from alloys and stainless
to gray iron
• Unique reinforcement design • Provides safety, strength and straight cuts
• Extra thin • Quick cutting action and low kerf loss
Charger RightCut Right Angle Grinder Reinforced Cut-off WheelsBETTER
FEATURES BENEFITS
• Quality aluminum oxide grain • Consistent performance at a competitive price
• Ideal for small jobs on a variety of metal applications from
carbon to stainless steels
• Unique reinforcement design • Provides safety, strength and straight cuts
• Extra thin • Quick cutting action and low kerf loss
• .045 RightCut Type 27 has new iron-, sulfur-, and • Boosted performance: 25% longer life and faster cut rate
chlorine-free bond and new hubbed wheels • Ideal for nuclear industry
Gemini RightCut Right Angle Grinder Reinforced Cut-off WheelsGOOD
FEATURES BENEFITS
• Quality aluminum oxide abrasive in a high performance • Over 28% better cut rate than standard aluminum oxide
bond system
• Unique reinforcement design • Provides safety, strength and straight cuts
• Extra thin • Quick cutting action and low kerf loss
FabCut
Right Angle Grinder
Reinforced Cut-off WheelsBETTER
FEATURES BENEFITS
• Premium abrasive and bond • Maximum productivity
• Unique reinforcement design • Provides safety, strength and straight cuts
• Extra thin • Quick cutting action and low kerf loss
• Rough sides
BEST
NorZon ThinCut Right Angle Grinder Reinforced Cut-off Wheels
FEATURES BENEFITS
• High performance, proprietary ceramic and • Up to 10 times the life of competitive aluminum oxide wheels
zirconia alumina abrasives blend • Far fewer wheel changes required so job is completed faster
• Maximum productivity; lowest total grinding costs
• Extra thin • Quick cutting action; minimal low kerf loss
BEST
NorZon Plus RightCut Right Angle Grinder Reinforced Cut-off Wheels
expanded
offering!
expanded
offering!
safetyTIPS
new!
RIGHT ANGLE GRINDER
CUTTING
6
www.nortonabrasives.com
GEMINI
RIGHTCUTS
0
1.0
2.0
3.0
5.0
4.0
6.0
G-RATIO
NORZON PLUS
RIGHTCUTS
COMPETITOR
#2
COMPETITOR
#1
COMPETITOR
#4
COMPETITOR
#3
COMPETITOR
#6
COMPETITOR
#5
5.26
1.68 1.68 1.62 1.56
0.61 0.49 0.34
GOOD
GEMINI, NORTON METAL
BETTER
CHARGER
BEST
NORZON PLUS
GOOD
GEMINI, NORTON METAL
BETTER
BEST
NORZON
SIZE: D X T X H MAX RPM STD PKG SPEC/PART NO. UPC NO. SPEC/PART NO. UPC NO. PART NO. UPC NO.
TYPE 27 DEPRESSED CENTER CUT-OFF –STEEL / STAINLESS
4 X .045 X 5/8 15,280 25 DC4045M 07660705249
4-1/2 X .045 X 5/8-11 13,580 20 RC45HNZP27 66252830748 RC45HCH27 66252832009 RC45HG27 66252819549
4-1/2 X .045 X 7/8 13,580 20 RC45NZP27 66252830742 RC45CH27 66252830125 RC45G27 66252819548
25 DC45045M 07660705250
5 X .045 X 5/8-11 12,225 20 RC5HG27 66252830586
5 X .045 X 7/8 12,225 20 RC5NZP27 66252830744 RC5CH27 66252830126 RC5G27 66252819550
6 X .045 X 5/8-11 10,185 20 RC6HG27 66252830587
6 X .045 X 7/8 10,185 20 RC6NZP27 66252830745 RC6CH27 66252830127 RC6G27 66252819551
7 X 1/16 X 7/8 8,600 20 RC7G27 66252912626
10 DC7116M 07660705251
9 X 1/16 X 5/8-11 6,600 10 RC9HG 66253019115
Highest Productivity, Great Performance and Value
SIZE: D X T X H MAX RPM STD PKG SPEC/PART NO. UPC NO. SPEC/PART NO. UPC NO. PART NO. UPC NO.
TYPE 01 FLAT CUT-OFF –STEEL / STAINLESS
4 X .035 X 5/8 19,100 25 A60-OBNA2 66253529590
4 X .040 X 5/8 15,280 25 CO404M 07660701616
4 X .045 X 5/8 15,280 25 RC4G 66243527956
4 X 1/16 X 5/8 19,100 100 FABCUT ALL PURP. 66243527827
FABCUT LONG LIFE 66243527826
4 X 3/32 X 5/8 15,280 25 RC4332G 66243527955
4-1/2 X .040 X 7/8 13,580 25 CO4504M 07660701617
4-1/2 X .045 X 7/8 13,580 25 RC45NZP 66252830730 RC45CH 66252826569 RC45G 66252823602
4-1/2 X 3/32 X 7/8 13,580 25 RC45332G 66252823599
5 X .040 X 7/8 12,225 25 CO504M 07660701618
5 X .045 X 7/8 12,225 25 RC5NZP 66252830731 RC5CH 66252826570 RC5G 66252823603
5 X .050 X 7/8 12,225 25 THIN CUT 66252809829
5 X 3/32 X 7/8 12,225 25 RC5332G 66252823600
6 X .040 X 7/8 10,185 25 CO604M 07660702757
6 X .045 X 7/8 10,185 25 RC6NZP 66252830734 RC6CH 66252826571 RC6G 66252823604
6 X 3/32 X 7/8 10,185 25 RC6332G 66252823601
7 X 1/16 X 7/8 8,730 25 THIN CUT 66252900652 57A364-TB25N 66252922675 RC7G 66252832323
SPEC check
STEEL/METAL STAINLESS MASONRYALUMINUM
4-1/2" x .045" x 7/8" Type 01 Wheels
Cutting Angle Iron –Carbon Steel
7
RIGHT ANGLE GRINDER
CUTTING
GOOD
GEMINI, MASONRY
BETTER
Norton Cut-Off Wheel Line
TECHtips
❚❚Run the cut-off machine at the highest possible speed marked on the wheel.
❚❚Long Life wheels should be used on a cut-off machine with 1 horsepower for every inch of wheel diameter.
With a less powerful machine, we recommend starting with a Free Cut specification.
Large Diameter Reinforced Cut-off Wheels for
Stationary Saws (10" –24")
FEATURES BENEFITS
23A
•Aluminum oxide abrasive, D sides •Engineered for fast cut and long life on a variety of applications
U57A
•
Aluminum oxide abrasive, centrally reinforced rough sides
•Engineered for fast cut and long life on a variety of applications
57A –B25N WHEELS
•
Constructed with full diameter side reinforcing, resin bond
•Versatile; durable, free cutting; offer greatest stiffness
CHARGER
•
A blend of premium zirconia alumina and aluminum oxide
•Outperforms standard aluminum oxide up to 3X in life
•High performance bond system •Over 25% better cut rate than standard aluminum oxide wheels
Large Diameter Stationary Reinforced Cut-off WheelsBETTER
FEATURES BENEFITS
GEMINI
•Quality aluminum oxide abrasive •Sets the aluminum oxide industry standard for cutting all material
in metal fabrication applications
NORTON MASONRY
•Sharp silicon carbide grain •Engineered for all masonry materials
GOOD Large Diameter Stationary Reinforced Cut-off Wheels
SIZE: D X T X H MAX RPM STD PKG SPEC/PART NO.* UPC NO. SPEC/PART NO. UPC NO.
TYPE 01 FLAT CUT-OFF –STEEL/STAINLESS/MASONRY
10 X 1/16 X 5/8 6,110 25 57A461-TB25N 66253122817
10 X 3/32 X 5/8 6,110 10 CO10332CH 66253106108 CO10332GFC 66253106101
10 CO10332GLL 66253106102
10 CO10332MA 07660789391
25 57A364-TB25N 66253122823
10 X 1/8 X 5/8 6,110 25 57A244-TB25N 66253122826
12 X 3/32 X 1 5,095 10 23A364-RB25B 66253261999
12 X 1/8 X 1 5,095 10 CO1218CH 66253207550 CO1218GFC 66253207547
CO1218GLL 66253207548
14 X 1/8 X 1 4,365 10 CO1418CH 66253306623 CO1418GFC 66253306609
CO1418GLL 66253306611
16 X 1/8 X 1 3,820 10 U57A304-TB25B 66253464694
16 X 5/32 X 1 3,820 10 U57A304-TB65B 66253464576 CO16532GFC 66253410183
CO16532CH 66253410194 CO16532GLL 66253410184
18 X 5/32 X 1 3,015 10 CO18532G 66253410185
20 X 5/32 X 1 2,710 5 CO20532CHFC 69078609045 CO20532GFC 69078609031
5 CO20532CHLL 69078609046 CO20532GLL 69078609032
10 U57A244-TB25B 69078666948
20 X 3/16 X 1 2,710 5 CO20316GFC 69078609033
CO20316GLL 69078609034
24 X 3/16 X 1-3/4 2,260 10 U57244-RB25B 69083166319
NOTE: “N”INDICATES SIDE REINFORCED, “B”INDICATES INTERNALLY REINFORCED.
new
look!
STATIONARY CHOP
STROKE MACHINE
STEEL/METAL
STAINLESS
MASONRY
ALUMINUM
It is the user’s responsibility to refer to and
comply with ANSI B7.1
8
www.nortonabrasives.com
GOOD
GEMINI, METAL, MASONRY
BETTER
CHARGER
Highest Productivity, Great Performance and Value
Chop Saw Reinforced Cut-off Wheels (10" –16")
FEATURES BENEFITS
•Zirconia alumina/aluminum oxide abrasive blend •2X the life and cut rate of aluminum oxide
•High performance resin bond •Free-cutting; burn-free cut
•Free Cut –side reinforced •Engineered for larger cross-sections and/or hard-to-cut materials
•Resist breakage and provide straight cuts
•Long Life –side reinforced •Ideal for small cross-section workpieces
•Resist breakage and provide straight cuts
•Rapid Cut –centrally reinforced, rough sides •Free cutting, non-binding; burr- and burn-free cuts
Charger Chop Saw Reinforced Cut-off WheelsBETTER
COMPETITIVE
A/O
NORTON
GEMINI
A/0
NORTON
CHARGER
ZA/AO
20%
100%
205%
Relative Wheel Life
Test done with 14 X 7/64 X 1
chopsaw
FEATURES BENEFITS
•Free Cut –side reinforced •Engineered for larger cross-sections and/or hard-to-cut materials
•Resist breakage and provide straight cuts
•Long Life –side reinforced •Ideal for small cross-section workpieces
•Resist breakage and provide straight cuts
•Rapid Cut –centrally reinforced, rough sides •Free cutting, non-binding; burr- and burn-free cuts
•Aluminum –
specially formulated bond for aluminum and
•Free cutting; resists loading
other soft, non-ferrous metals; no wax or rubber fillers •No surface contamination
Gemini Chop Saw Reinforced Cut-off WheelsGOOD
FEATURES BENEFITS
•Stud Cutter:
thin, side-reinforced; aluminum oxide abrasive
•Designed specifically for cutting steel studs
•Norton Masonry: sharp, silicon carbide grain •Engineered for all masonry materials such as concrete,
brick and asphalt
•Norton Metal: quality aluminum oxide abrasive •Designed for cutting alloys, steels and ferrous metals
Norton Metal, Masonry and Steel Stud Cutter Chop Saw Reinforced WheelsGOOD
SIZE: D X T X H MAX RPM STD PKG SPEC/PART NO. UPC NO. SPEC/PART NO. UPC NO.
TYPE 01 FLAT CUT-OFF –STEEL / STAINLESS / MASONRY
10 X 7/64 X 1 6,110 10 CO10764G 66253106109
12 X 7/64 X 1 5,095 10 CO12764CH 66253207552 CO12764G 66253207554
CO12764GRC 66253214561*
14 X 7/64 X 1 4,365 10 CO14764CHFC 66253306624 CO14764GFC 66253306627
10 CO14764CHLL 66253306625 CO14764GLL 66253306626
10 CO14764CHRC 66253309614* CO14764GRC 66253313588*
10 CO14764GALU 66253314816
10 CO14764MSS 07660789405
5 CO14764M 07660703970
5 CO14764MA 07660789402
16 X 7/64 X 1 3,820 10 CO16764FC 66253410196 CO16764G 66253410198
CO16764LL 66253410197
* RAPIDCUTS ARE CENTRALLY REINFORCED; ALL OTHERS ARE SIDE REINFORCED
new
look!
CHOP SAW
TECHtips
❚❚Use Long Life chop saw wheels on small cross section workpieces.
❚❚Use Free Cut chop saw wheels on larger cross-sections and/or hard-to-cut materials. It is the user’s responsibility to refer to and
comply with ANSI B7.1
9
Norton Cut-Off Wheel Line
FEATURES BENEFITS
•Versatile •
Ideal for slotting and cutting when initial cost is a main consideration
GEMINI ALL PURPOSE
•Quality aluminum oxide abrasive, rough sides •Sets the aluminum oxide industry standard for cutting all material
in metal fabrication applications
NORTON MASONRY
•Sharp, silicon carbide grain •
Engineered for all masonry materials such as concrete, brick and asphalt
NORTON METAL
•Quality aluminum oxide abrasive •Designed for cutting alloys, steels and ferrous metals
Masonry and Metal Circular Saw Reinforced Cut-off WheelsGOOD
FEATURES BENEFITS
ALUMINUM OXIDE 57A –B25N WHEELS
•Constructed with full diameter side reinforcing, •Versatile; durable, free cutting: offer greatest stiffness
resin bond
ALUMINUM OXIDE –OBNA2 WHEELS
•Side reinforced, resin bond •Yield maximum cut rate and minimum kerf loss; ideal when thin cut is desired
CHARGER LONG LIFE
•Blend of premium zirconia alumina and aluminum •Outperforms standard aluminum oxide up to 3X in life
oxide abrasives, rough sides
Metal Circular Saw Reinforced Cut-off Wheels –Provide precise, thin cutsBETTER
Circular Saw Reinforced Cut-off Wheels (6" –8")
STEEL/METAL
STAINLESS
MASONRY
ALUMINUM
CIRCULAR SAW
GOOD
GEMINI, NORTON METAL, MASONRY
BETTER
SIZE: D X T X H MAX RPM STD PKG SPEC/PART NO. UPC NO. SPEC/PART NO. UPC NO.
TYPE 01 FLAT CUT-OFF –STEEL / STAINLESS / MASONRY
6 X .035 X 5/8 10,185 25 A60-OBNA2 66252835054 CO6035G 66252809714
6 X 1/16 X 5/8 10,185 25 57A364-TB25N 66252822973 CO6116G 66252809718
6 X 1/8 X 5/8 10,190 25 57A244-TB25N 66252822992
6-1/2 X 1/8 X DM* 9,405 10 CO6518M 07660789098
CO6518MA 07660789089
7 X .035 X 5/8 8,730 25 A60-OBNA2 66252938787
7 X .060 X 5/8 8,730 25 A60-OBNA2 66252938811
7 X 1/16 X 5/8 8,730 25 57A364-TB25N 66252922673 CO716G 66252905957
7 X 3/32 X 5/8 8,730 25 57A244-TB25N 66252922688
7 X 1/8 X DM* 8,730 25 CO718M 07660789097
CO718MA 07660789088
8 X .035 X 5/8 7,640 25 A60-OBNA2 66253042979
8 X .060 X 5/8 7,640 25 A60-OBNA2 66253042981
8 X 1/16 X 5/8 7,640 25 57A364-TB25N 66253022703 CO8116G 66253007025
25 CHARGER LL 66253017771
10 GEMINI ALL PURP. 66253017795
8 X 3/32 X 5/8 7,640 25 57A244-TB25N 66253022710
8 X 1/8 X 5/8 7,640 25 57A364-TB25N 66253022712
8 X 1/8 X DM* 7,640 10 CO818M 07660789096
CO818MA 07660789086
* DM DENOTES DIAMOND MOUNT; 5/8" HOLE BUSHINGS INCLUDED
EXAMPLE: CO 4 18 38 G FC
WHEEL TYPE DIAMETER THICKNESS HUB/HOLE SIZE PRODUCT GROUP MODIFIER
CO = CUT-OFF 4= 4" 18 = 1/8" 38 = 3/8" G= GEMINI FC = FREE CUT, LL = LONG LIFE
Cut-off Wheel Part Number Key
10
www.nortonabrasives.com
Highest Productivity, Great Performance and Value
❚❚Use Ductile for ultra-hard metals, hydraulic hose and PVC pipe.
High-Speed Reinforced Cut-off Wheels for Gas,
Electric-Powered and Walk-Behind Road Saws (12" –18")
SPECIFICATION / APPLICATION ABRASIVE TYPE
•Metalworking •Versatile aluminum oxide
•Ductile •Durable silicon carbide and aluminum oxide blend
•Concrete •Sharp 24 grit silicon carbide
•Asphalt •Coarse 16 grit silicon carbide
•Asphalt/green concrete •Cold pressed silicon carbide blend
•For higher performance on asphalt/green concrete •Hot pressed silicon carbide blend
High-Speed Reinforced Cut-off WheelsGOOD
FEATURES BENEFITS
•Thicker blades •Longer life
•Designed specifically to cut metal decking quickly
High-Speed Metal Decking Reinforced Cut-off WheelsGOOD
FEATURES BENEFITS
•Thicker blades •For ventilation, forcible entry, rescue and demolition on steels,
aluminum, PVC and masonry materials
High-Speed Rescue Reinforced Cut-off WheelsGOOD
SIZE MAX STD METAL DUCTILE ASPHALT CONCRETE
D X T X H RPM PKG PART NO. UPC NO. PART NO. UPC NO. PART NO. UPC NO. PART NO. UPC NO.
TYPE 01 CUT-OFF –FOR GAS & ELECTRIC-POWERED SAWS –STEEL/CONCRETE/ASPHALT
12 X 1/8 X 20 MM 6,360 10 HSM1220 70184680310 HSD1220 70184680314 YPAHA1253220 70184670243 HSC1220 70184680312
12 X 1/8 X 1 6,360 10 HSM1201 70184680311 HSD1201 70184680315 YPAHA12532 70184670083 HSC1201 70184680313
14 X 1/8 X 20 MM 5,400 10 HSM1420 70184680317 HSD1420 70184680321 YPAHA1420 70184671456 HSC1420 70184680319
HSMD1420 DECKING 66243578260
HSRES1420 RESCUE 66243578263
14 X 1/8 X 1 5,400 10 HSM1401 70184680318 HSD1401 70184680322 YPAHA14 70184672877 HSC1401 70184680320
HSMD1401 DECKING 66252832521
HSRES1401 RESCUE 66243578262
16 X 1/8 X 20 MM 4,800 10 HSM1620 66252830885 HSC1620 70184625269
16 X 1/8 X 1 4,800 10 HSM1601 66252830886 HSC1601 70184623029
GOOD
ASPHALT, ASPHALT/GREEN CONCRETE, CONCRETE
GOOD
METAL, DUCTILE, CONCRETE, ASPHALT
TECHtip
SIZE MAX STD ASPHALT ASPHALT/GREEN CONCRETE CONCRETE
D X T X H RPM PKG PART NO. UPC NO. PART NO. UPC NO. PART NO. UPC NO.
TYPE 01 CUT-OFF –FOR WALK-BEHIND SAWS –CONCRETE/ASPHALT
14 X 3/16 X 1 PIN HOLE 4,365 10 ASP14316 70184680324 YHP14316 70184670100* CON14316 70184680323
14 X 1/4 X 1 PIN HOLE 4,365 5 YPASA1414 70184670535 YHP1414 70184670099* YPASC1414 70184670533
18 X 1/4 X 1 PIN HOLE 4,250 5 YHP1814 70184670103* YPASC1814 70184670098
18 X 3/8 X 1 PIN HOLE 4,250 5 YHP1838 70184648998*
* THESE ASPHALT/GREEN CONCRETE WHEELS ARE HOT-PRESSED FOR ADDED STRENGTH
new!
new!
expanded
offering!
HIGH SPEED GAS/
ELECTRIC SAW WALK-BEHIND SAW
11
SIZE: D X T X H MAX RPM STD PKG SPEC UPC NO. SPEC UPC NO.
TYPE 01 FLAT CUT-OFF
14 X 1/8 X 1 5,400 10 NORZON III RAILCUT 66253360493 A24-RAILCUT 66253363693
NORZON III RAIL FASTCUT 66253363694
16 X 1/8 X 1 4,800 10 NORZON III RAILCUT 66253464607 A24-RAIL FASTCUT 66253411892
NORZON III RAIL FASTCUT 66253464415
16 X 5/32 X 1 4,800 10 A36-T RAILCUT 66253466357
FOR FIXED RAIL TRACK CUTTING ONLY.
To put Norton abrasives to work, contact your local Norton distributor. Call (800) 446-1119 or email us at [email protected] and we will put you in contact with your local Norton
distributor. Or, visit our website at www.nortonabrasives.com to view our online catalog and learn about our latest products and applications, and find a local Norton distributor.
© Saint-Gobain Abrasives, Inc. March 2007
Gemini, Norton SG, NorZon and the Norton logo are registered trademar s and
Charger, FabCut, ThinCut, RightCut are trademar s of Saint-Gobain Abrasives, Inc.
form #8025
Your Source For Cost-Saving Abrasive Solutions™
HEADQUARTERS:
Saint-Gobain Abrasives, Inc.
PO Box 15008, 1 New Bond Street
Worcester, MA 01615-0008
CUSTOMER SERVICE U.S.:
Saint-Gobain Abrasives, Inc.
2770 West Washington Street
Stephenville, TX 76401-3799
Phone: (254) 918-2313
Fax: (254) 918-2314
CUSTOMER SERVICE CANADA:
Saint-Gobain Abrasives Canada Inc.
PO Box 3008, 3 Beach Road
Hamilton, ON L8L 7Y5
Phone: (905) 547-2551
Fax: (905) 547-8157
www.nortonabrasives.com
Highest Productivity, Great Performance and Value
GOOD
A24
Rail Reinforced Cut-off Wheels (14", 16" Side Reinforced, R Sides)
BETTER
NORZON III
FEATURES BENEFITS
•A24–RailCut and Rail FastCut •The choice for light-duty applications and older machines
with less horsepower
•Work under a wide range of operating conditions
•Maintain cutting throughout the life of the wheel
•Smooth, easy cutting action
FEATURES BENEFITS
•NorZon III RailCut and NorZon III Rail FastCut •Ideal for high powered, well-maintained machines
•Maximum number of cuts per wheel
•Fastest cutting times
•Highest value on the cost per cut basis
BETTER NorZon III RailCut and NorZon III Rail FastCut Reinforced Cut-off Wheels
GOOD A24 RailCut and Rail FastCut Reinforced Cut-off Wheels
GAS/ELECTRIC SAW
This manual suits for next models
1
Table of contents
Other Norton Accessories manuals
