Nostalgia Electrics CCP-200 Quick guide

All products are trademarks of Nostalgia Products Group, LLC.
Worldwide design & utility patented or patents pending.
© 2010 Nostalgia Products Group, LLC.
www.nostalgiaelectrics.com
(rev. 05/25/10)

CCP200
Vintage Collection™
Old Fashioned Movie Time Popcorn Cart
Instructions and Recipes
Instructions et Recettes
Instrucciones y Recetas

ENGLISH
2
CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . 3
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . 3
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . 4
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . 5
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . 10
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . 11
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . 11
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . 14
SAFETY
Appliance Specifications:
120 Volts, 60 Hz
325 Watts, 2.71 Amps
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards
that can kill or hurt you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard
is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.

ENGLISH
3
IMPORTANT PRECAUTIONS
NEVER immerse in water.1.
NEVER use near water.2.
NEVER use an abrasive sponge nor cloth.3.
NEVER use a scouring pad on the appliance.4.
NEVER leave appliance unattended while in use.5.
NEVER force Kettle in or out of the brackets as this may cause gears6.
to become misaligned and appliance will not operate properly.
Unplug unit from outlet when not in use and during cleaning.
7.
DO NOT operate this appliance with a damaged cord or8.
plug, nor if the appliance ever malfunctions.
DO NOT clean any parts of this appliance in a dishwasher.9.
Keep out of reach of children.10.
This appliance is NOT A TOY.11.
Unsupervised young children and cognitively challenged12.
individuals should never operate this appliance.
Young children should be supervised while in proximity of the13.
appliance to ensure that they do not play with it.
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed when
using electrical appliances, including the following:
Read all instructions before operating this appliance.
1.
Keep door of Main Unit closed while operating. Do not2.
touch Kettle while operating; it gets very HOT.
To protect against electrical shock do not immerse cord, plug
3.
or any part of this appliance in water or other liquids.
Close supervision is necessary when any appliance is used near children.4.
Unplug from outlet when not in use, before removing parts and before cleaning.5.
DO NOT operate any appliance with a damaged cord or plug,6.
nor if the appliance has been damaged in any manner. Return the
appliance to the nearest repair shop for examination or repair.
The manufacturer does not recommend the use of accessory7.
attachments. Use of accessory attachments may cause injuries.
DO NOT use outdoors.
8.
Position the appliance as close to the outlet as possible9.
to prevent injury due to tripping over cord.
DO NOT leave Kettle motor running once popping has ceased.10.

ENGLISH
4
Extreme caution must be used when moving this appliance.11.
DO NOT use the appliance for other than its intended use.12.
An appliance that is plugged into an outlet should13.
not be left unattended while in operation.
Check Kettle for presence of foreign objects prior to use.
14.
Make sure the Kettle is properly attached to brackets before15.
operating and that the motor plug is plugged into the Kettle.
A short power supply cord is provided to reduce the risk resulting16.
from becoming entangled or tripping over a long cord.
Longer detachable power supply cords can be used if care is exercised in their use.
17.
The marked electrical rating of an extension cord should be at18.
least as great as the electrical rating of the appliance.
This appliance has a polarized plug (one blade is wider than19.
the other). To reduce the risk of electrical shock, this plug is
intended to fit into a polarized outlet only one way.
Save these instructions!
20.
INTRODUCTION
Thank you for purchasing the OLD FASHIONED MOVIE TIME POPCORN CART,
a product in Nostalgia Electrics’ Vintage Collection™. This 48” tall vendor-style
popcorn cart will be the hit of every party. It pops up to eight cups of hot, fresh,
kettle cooked popcorn per batch. Providing a vintage look and feel, reminiscent
of silent movie houses and carnivals circa-early 1900s, the OLD FASHIONED
MOVIE TIME POPCORN CART is designed for home use. It features a large,
stainless steel kettle with a built-in stirring system and kernel catcher to
keep unpopped kernels out of each perfect batch. There is a compartment
in the base of the unit to store supplies, making it easy to keep the cart well
stocked and organized. The OLD FASHIONED MOVIE TIME POPCORN CART
has an easy-to-clean design. Its accessible height makes serving a snap.

ENGLISH
5
PARTS & ASSEMBLY
Hardware
#1 Screw (10mm) #2 Bolt (10mm) #3 Bolt (20mm) #4 Bolt (65mm)
Qty. 4 Qty. 6 Qty. 4 Qty. 4
#5 Flat Washer #6 Nut Cap #7 Kernel Tray Handle #8 Kernel Tray
Qty. 8 Qty. 6 Qty. 1 Handle Screw
Qty. 1

ENGLISH
6
Parts
(A) Main Unit (B) Kernel Measuring (C) Storage (D) Oil Measuring
Cup (2 ounces) Compartment Spoon (1 Tbsp.)
(E) Push Handle (F) Axle Rod (G) Wheel (H1) Wrench
(H2) Wrench (I) Base Support (J) Bottom Plate (K) Cross Bar
(L) Leg Assembly (M) Popcorn Scoop
A
C D E F G
I
J
E - Push handle 1
F - Axle bolt 2
G - Wheel 2
I - Base support 1
J - Bottom Plate 1
L - Leg assembly 1
C - Storage compartent 1
A - Main unit 1
H - Wrench 2
M
N - Plastic Scoop 1
- Leg assembly bolt 4
B
B - Spoon 1
K
H
D - Oil spoon 2
M
K - Cross bar 1
L N

ENGLISH
7
Assembly of Base Support
Attach Push Handle (E) from inside Storage1.
Compartment (C) using supplied #1 Screws.
Insert Cross Bar (K) into the square inserts on the inside of Base Support (I)2.
and secure from above with two #2 Bolts. Insert the Leg Assembly (L) over
the protruding ends of the Base Support (I) and fasten from the inside of Base
Support (I) using four #4 Bolts, four #5 Flat Washers, and four #6 Nut Caps.
Secure Bottom Plate (J) to Base Support (I) using four #2 Bolts.3.
Assemble Base Support (I) into the bottom of the Storage4.
Compartment (C) and secure with four #3 Bolts.

ENGLISH
8
Assembly of Wheels
Insert Axle Rod (F) into Base Support (I).1.
Put on #5 Flat Washer. Slide Wheel (G) into Axle Rod (F)2.
and add a second #5 Flat Washer.
Use the end of Wrench (H2) with small notch to hold the Axle Rod notch in place.3.
While holding Axle Rod (F) in place, tighten the #6 Nut Cap with Wrench (H1).
Add #5 Flat Washer, second Wheel (G), another #5 Flat Washer, and #6 Nut4.
Cap to the other side of the Axle Rod (F), following the directions above.
(#6)
Nut
Cap
(#5)
Flat
Washer
(F)
Axle
Rod
(G)
Wheel
(I)
Base
Support

ENGLISH
9
Assembly of Main Unit
Remove Power Cord from underneath Main Unit (A).1.
Place Main Unit (A) onto the top of the Storage Compartment (C).2.
Ensure that the two inserting pins at the bottom of the Main3.
Unit (A) line up correctly so that Main Unit (A) can be locked
under the beam of the Storage Compartment (C).
Remove Kernel Tray from Main Unit (A) and turn right side up. Attach #7 Kernel4.
Tray Handle with #8 Kernel Tray Screw and correctly place inside Main Unit (A).
Cord Location
Cord is located at the bottom of the Main Unit (A).
ON / OFF &
Light Switches
Crank Handle
Stainless Steel Kettle
Kernel Tray

ENGLISH
10
HOW TO OPERATE
Before first use, clean the inside of the unit by wiping with a moist,
non-abrasive sponge, towel or cloth and then wipe with a non-
abrasive dry towel. Wipe down the inside of the Kettle and be
sure it is properly placed in the brackets before starting.
First, find a flat surface near an electrical outlet before1.
starting. Make sure your cord is away from any water source.
It is acceptable to use an extension cord if needed.
Gather your popcorn making supplies: popcorn, seasonings, bowls2.
or bags for holding the popcorn, cooking oil, Kernel Measuring
Cup (B) and Oil Measuring Spoon (D). (Kernel Measuring Cup
and Oil Measuring Spoon are included with your unit).
Plug in the appliance while switch is flipped to OFF position.3.
Make sure Kettle is properly secured in support brackets.4.
Make sure Kettle motor is plugged in.5.
Turn appliance ON by flipping the switch on the top of the6.
machine (see illustration above for location of switches). Allow
the appliance to run 3-5 minutes to heat up Kettle.
Turn unit OFF.7.
Use the Oil Measuring Spoon supplied with your OLD FASHIONED MOVIE TIME8.
POPCORN CART to add 1 tablespoon of your favorite popcorn cooking oil to
the Kettle. For best popping results, it is suggested to use light vegetable oil.
Add popcorn kernels to the Kettle using supplied Kernel Measuring Cup (B).9.
Turn the unit ON and close the door. In no time at all, you will10.
hear the popping begin. Fresh, hot popcorn will begin to burst
out of the flip lids on the Kettle - just like at the theater!

ENGLISH
11
HELPFUL TIPS
SMOKING
If your OLD FASHIONED MOVIE TIME POPCORN CART begins to smoke
during cooking, it may be due to grease build up. In order to reduce smoking,
make sure that you clean the inside of the Kettle between uses.
CLEANING & MAINTENANCE
Make sure appliance is unplugged before cleaning. Unplug the outer plug1.
to the outlet as well as the Kettle motor plug inside the Main Unit (A).
Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the inside2.
and outside of Main Unit (A), then wipe with a non-abrasive towel to dry.
Unplug Kettle motor and remove Kettle from support brackets.
3.
Take Kettle out of the Main Unit (A). After removing Kettle from4.
Main Unit (A), fill ²/3 of Kettle with hot, soapy water.
Let the Kettle sit for 15 – 20 minutes to cut the grease. (time may vary – use5.
your own judgment depending on the amount of cleaning necessary)
Empty water. If necessary, use the scrubber side of a
6.
cleaning sponge to scrub inside of Kettle.
Rinse inside carefully and dry.7.
Wipe outside of Kettle with damp cloth and dry.8.
NOTE: To protect the motor plug from getting wet, never immerse the Kettle
in any liquid. Never place any parts in the dishwasher. Always wash by hand.

ENGLISH
12
RECIPES
The OLD FASHIONED MOVIE TIME POPCORN CART makes hot, fresh, theater
style popcorn every time – anytime!
Enjoy your freshly popped corn in a variety of ways:
Regular theater style popcorn – add butter and salt.•
Add a pinch of sugar and salt to popcorn for a sweet kettle corn taste.•
Flavored popcorn – add seasoning from any gourmet popcorn seasoning kit.•
Try some of these fun recipes:•
1 Gallon = 16 Cups
PARMESEAN POPCORN
1 Gallon of•
Popped Corn
1 Tsp Garlic•
Powder
3 Green Onions,•
finely chopped
½ Tsp Cracked•
Pepper
1 Tsp Sea Salt•
1 Cup Parmesean•
Cheese, grated
(more or less
to taste)
3 Tbsps Olive•
Oil, heated
Pop corn kernels using the OLD FASHIONED MOVIE
TIME POPCORN CART as directed on page 10.
Combine garlic powder, green onions, cracked
pepper, sea salt and parmesean cheese. Set aside.
In a large mixing bowl, drizzle hot
olive oil over popcorn.
Toss until well coated.
Slowly add in dry ingredients while continuously
strirring popcorn until well coated.
You may also shake the dry ingredients over
popcorn in a large paper or muslin bag.
TRADITIONAL POPCORN BALLS
½ Cup Popcorn•
½ Cup Corn Syrup•
½ Cup Granulated•
Sugar
½ Teaspoon Salt•
1 Stick of Butter,•
softened
Pop corn kernels using the OLD FASHIONED MOVIE
TIME POPCORN CART as directed on page 10.
Mix corn syrup, sugar and salt together in pot and
dissolve over medium heat for about 3 minutes.
Add popcorn to pot, stirring and tossing consistently
until popcorn is evenly coated at low heat.
Remove from heat.
Use softened butter to form balls while
popcorn mixture is still warm.
Wrap individual balls in plastic wrap, tie
and store at room temperature.

ENGLISH
13
CHUNKY MONKEY
1 Gallon Popcorn•
1 12-oz bag•
Semi-Sweet
Chocolate Chips
1 12-oz bag Peanut•
Butter Morsels
4.2 oz bag Banana•
Chips, broken
into small pieces
11-oz bag Peanuts•
Pop corn kernels using the OLD FASHIONED MOVIE
TIME POPCORN CART as directed on page 10.
Melt chocolate chips and peanut butter morsels
over stove, as packaging recommends.
Line cookie sheet with wax paper.
Toss together popcorn and banana chips.
Spread popcorn and banana chip
mixture evenly over cookie sheet.
Drizzle melted chocolate and peanut butter
mixture over popcorn and banana chips.
Sprinkle peanuts over chocolate
and peanut butter mixture.
Allow to cool.
When chocolate and peanut butter has hardened,
break up the Chunky Monkey into pieces.
Can be stored in plastic freezer bags.
POPCORN PEPPERMINT BARK
1 Gallon•
Popped Corn
1 12-oz bag Semi-•
Sweet or Dark
Chocolate Chips
1¼ cup Peppermint•
Sticks, crushed
Pop corn kernels using the OLD FASHIONED MOVIE
TIME POPCORN CART as directed on page 10.
Melt chocolate chips over stove,
as packaging recommends.
Line cookie sheet with wax paper.
Spread popcorn evenly over cookie sheet.
Drizzle melted chocolate over popcorn.
Sprinkle crushed peppermints over chocolate.
Allow to cool.
When chocolate has hardened, break up
Popcorn Peppermint Bark into pieces.
Can be stored in plastic freezer bags.

ENGLISH
14
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IS DAMAGED WHEN
YOU FIRST TAKE IT OUT OF THE BOX, PLEASE RETURN
IT TO THE PLACE OF PURCHASE IMMEDIATELY.
OLD FASHIONED MOVIE TIME POPCORN CART / CCP200
Should you have any questions, please contact us via email or at the
customer service number listed below between the hours of 8:00 AM
and 5:00 PM, Monday through Friday, Central Standard Time.
Distributed by:
Nostalgia Products Group LLC
1471 Partnership Dr.
Green Bay, WI 54304-5685
Customer Service
Phone: [phone]
Web: www.nostalgiaelectrics.com
Customer Service Inquiry
To submit a Customer Service inquiry, go to www.nostalgiaelectrics.com and
fill out the Customer Service Inquiry form and click the Submit button.
A representative will contact you as soon as possible.
This appliance is designed and built to provide many years of satisfactory
performance under normal household use. The distributor pledges to the
original owner that should there be any defects in material or workmanship
during the first 90 days of purchase, we will repair or replace the unit at
our option. Our pledge does not apply to damages caused by shipping,
mishandling or unit being dropped. A product deemed defective either from
manufacturing or being mishandled is up to the distributor’s discretion.
In order to obtain service under this warranty, please contact Nostalgia
Products Group, LLC at the telephone number listed above or by filling out
the Customer Service Inquiry Form located at www.nostalgiaelectrics.com.
This warranty does not apply to re-manufactured merchandise.
Please read these instructions carefully. Failure to comply with these instructions,
damages caused by improper replacement parts, abuse or misuse will void this
pledge to you and is being made in place of all other expressed warranties.

ENGLISH
15
TABLE DES MATIÈRES
PRÉCAUTIONS IMPORTANTES . . . . . . . . . . . . . . . . 16
MISES EN GARDE SÉCURITAIRES IMPORTANTES . . . . . 16
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . 17
PIÈCES ET ASSEMBLAGE . . . . . . . . . . . . . . . . . . . 18
COMMENT FAIRE FONCTIONNER . . . . . . . . . . . . . . 23
CONSEILS PRATIQUES . . . . . . . . . . . . . . . . . . . . 24
NETTOYAGE ET ENTRETIEN . . . . . . . . . . . . . . . . . . 24
RECETTES . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
RETOURS DE LA MARCHANDISE ET GARANTIES . . . . . . 28
SÉCURITÉ
Spécifications des Appareils:
120 Volts, 60 Hz
325 Watts, 2.71 Ampères
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and
on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards
that can kill or hurt you and others.
All safety messages will follow the safety alert symbol.
All safety messages will tell you what the potential hazard
is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.

16
FRANÇAIS
16
PRÉCAUTIONS IMPORTANTES
NE JAMAIS immerger dans l'eau.1.
NE JAMAIS utiliser près d'une source d'eau.2.
NE JAMAIS utiliser d'éponge ou de chiffon abrasif.3.
NE JAMAIS utiliser de tampon à récurer sur l'appareil.4.
NE JAMAIS laisser l'appareil sans surveillance lorsqu'elle est utilisée.5.
NE JAMAIS retirer la Marmite de ses supports ou l'enfoncer6.
de force parce que ceci pourrait désaligner l'engrenage,
et l'appareil ne fonctionnera pas correctement.
Débrancher l'appareil de la prise murale lorsqu'il n'est7.
pas utilisé ou au moment du nettoyage.
NE PAS faire fonctionner cet appareil lorsque la prise ou le cordon8.
est endommagé(e) ou lorsqu'il ne fonctionne pas correctement.
NE PAS nettoyer quelque pièce de cet appareil au lave-vaisselle.
9.
Garder hors de la portée des enfants.10.
Cet appareil n'est PAS UN JOUET.11.
Les enfants laissés sans surveillance et les personnes ayant une12.
déficience cognitive ne devraient pas utiliser cet appareil.
Les jeunes enfants qui sont à proximité de l'appareil ne devraient pas
13.
être laissés sans surveillance pour ne pas qu'ils jouent avec celui-ci.
MISES EN GARDE SÉCURITAIRES
IMPORTANTES
Les mesures de précaution de base devraient toujours être suivies au moment
de l'utilisation d'un appareil électrique, y compris les éléments suivants:
Lire toutes les consignes avant de faire fonctionner l'appareil.1.
Garder la porte de l'Appareil principale fermée au moment de son fonctionnement.2.
Ne pas toucher à la Marmite en fonctionnement; elle devient très CHAUDE.
Pour se protéger des chocs électriques, ne pas immerger le cordon, la3.
prise ou quelque pièce de cet appareil dans l'eau ou autres liquides.
La surveillance étroite des enfants est nécessaire lorsque4.
quelque appareil électrique est utilisé à proximité d'eux.
Débrancher de la prise murale lorsqu'il n'est pas utilisé,5.
avant de retirer des pièces ou de le nettoyer.
NE PAS faire fonctionner l'appareil lorsque le cordon ou la prise est6.
endommagé(e) ou que l'appareil a été endommagé de quelque façon. Retourner
l'appareil à l'atelier de réparations le plus près pour qu'il soit évalué ou réparé.
Le fabricant ne recommande pas l'utilisation d'accessoires.7.
L'utilisation d'accessoires pourrait provoquer des blessures.

17
FRANÇAIS
17
NE PAS utiliser à l'extérieur.8.
Placer l'appareil le plus près possible d'une prise de courant pour9.
éviter de se blesser en trébuchant sur le cordon électrique.
NE PAS laisser le moteur de la Marmite tourner
10.
lorsque l'éclatement du maïs a cessé.
Une attention toute particulière doit être accordée11.
au moment de déplacer l'appareil.
NE PAS utiliser l'appareil à une autre fin que celle pour laquelle il est prévu.12.
Un appareil qui est branché dans une prise de courant ne devrait pas13.
être laissé sans surveillance lorsqu'il est en fonctionnement.
Vérifier qu'il n'y a pas de corps étranger dans la Marmite avant son utilisation.14.
S'assurer que la Marmite est correctement fixée aux supports avant le15.
fonctionnement et que la prise du moteur est branchée à la Marmite.
Un cordon d'alimentation court est prévu pour diminuer le risque
16.
d'emmêlement ou de trébuchement avec un long cordon.
Des rallonges électriques peuvent être utilisées si vous17.
être prudents lorsque vous en faites l'utilisation.
Les caractéristiques électriques d'une rallonge devraient être18.
semblables ou meilleures que celles attribuées à l'appareil.
Cet appareil est doté d’une fiche polarisée (une lame est plus large que
19.
l’autre). Afin de réduire le risque d’électrocution, cette fiche doit être branchée
dans une fiche électrique polarisée également et ce, dans une direction
seulement, selon les dimensions des fiches présentes dans la prise.
Conserver ces consignes!
20.
INTRODUCTION
Merci d'avoir acheté le CHARIOT À MAÏS DES SALLES DE CINÉMA D'ANTAN,
un produit de la Collection Vintage, de Nostalgia Electronics™. Ce chariot
de style vendeur de maïs de 48 po (122 cm) de hauteur aura beaucoup de
succès dans chacune de vos fêtes. Il peut faire éclater 1.89 L de maïs chauds,
frais par lot. Ayant l'apparence des vieilles salles de cinéma d'antan et des
carnavals du début du XXe, le CHARIOT À MAÏS DES SALLES DE CINÉMA
D'ANTAN est conçu pour la maison. Il dispose d'une large Marmite en acier
inoxydable et d'un système de brasage intégré ainsi que d'un dispositif
recueilleur de maïs en grains pour conserver chaque lot exempt de grains de
maïs non éclatés. Il y a un compartiment à la base de l'appareil pour ranger
les fournitures, ce qui permet de garder le chariot bien approvisionné et
organisé. Le CHARIOT À MAÏS DES SALLES DE CINÉMA D'ANTAN est
d'une conception facile à nettoyer. Sa hauteur accessible facilite le service.

18
FRANÇAIS
18
PIÈCES ET ASSEMBLAGE
Matériel
Vis n° 1 (10mm) Boulon n° 2 (10mm) Boulon n° 3 (20mm) Goujon n° 4 (65mm)
Qté. 4 Qté. 6 Qté. 4 Qté. 4
Rondelle Plate n° 5 Capuchon d'Écrou Traitement de Plateau Vis de Traitement
Qté 8 n° 6 Qté 6 de Grain n° 7 Qté 1 de Plateau de Grain
n° 8 Qté 1