Novell CLIENT FOR LINUX 2.0 SP3 Instruction Manual

novdocx (en) 13 May 2009
Novell®
Novell Client 2.0 SP3 for Linux Installation Quick
Start
ClientTM for Linux
Installing the Novell Client for Linux
This document explains how to install the Novell Client for
Linux software on a workstation.
For information on installing a preconfigured version of the
Novell Client, see “Configuration Files for Preconfiguring
the Novell Client” in the Novell Client for Linux
Administration Guide.
“System Requirements” on page 1
“Using the YaST Control Center to Install the Novell
Client” on page 1
“Using the Installation Script to Install the Novell Client”
on page 2
“Upgrading From Version 2.0 SP1” on page 2
“Uninstalling the Novell Client for Linux” on page 3
SYSTEM REQUIREMENTS
The Novell Client 2.0 SP3 for Linux requires workstations
running on the following:
SUSE®Linux Enterprise Desktop 10 SP3 (32-bit or 64-
bit)
IMPORTANT: Do not install the 32-bit version of the Novell
Client 2.0 SP3 for Linux onto a 64-bit operating system. If
you do so, you will lose the ability to log into the GUI
credential provider. You will see the error message,
“Authentication Failed,” and will be unable to log in.
Ensure that you have one of the following packages
provided by the base operating system that is already
installed on the system. The package that is installed
depends on your kernel type.
novfs-kmp-default
novfs-kmp-smp
novfs-kmp-bigsmp
NOTE: Novell Client CLI packages alone will be installed by
default in case of OES 2. To install the rest of the GUI
packages, you can follow the procedures listed in the
sections below.
novell-nautilus-plugin and novell-
konqueror-plugin
rpms provide the GUI for integrating
Novell Client functionality with the file-managers in GNOME
and the KDE desktops respectively.
USING THE YAST CONTROL CENTER TO INSTALL THE
NOVELL CLIENT
Using YaST to install the Novell Client for Linux requires the
following steps:
1. Installing the Novell Client for Linux Packages
2. Starting or Restarting the Novell Client for Linux
Installing the Novell Client for Linux Packages
1Make sure you have updated the workstation to the
latest SUSE Linux Enterprise Desktop 10 SP3
patches.
2Launch the YaST Control Center.
GNOME: Click Computer > More Applications >
System > YaST.
KDE: Click the menu button > System > YaST.
3If you are not logged in as
root , type the root
password, then click Continue.
4Click Software in the left column, then click Add-on
Product in the right column.
5Select the appropriate Add-on Product source (such as
CD, DVD, or Local Directory), then click Next.
TIP: Select Local Directory if you downloaded the file
from Novell Downloads (http://download.novell.com).
6Follow the on-screen instructions for the installation
source you specified in Step 5.
For example, you might be prompted to insert the
Novell Client for Linux CD, or to specify which local
directory contains a copy of the downloaded Novell
Client for Linux files.
7Select Yes, I Agree to the License Agreement, then
click Next.
8Select Patterns from the Filter drop-down list.
9Select Novell Client for Linux in the Additional Software
category.

novdocx (en) 13 May 2009
2
10 The Novell Client for Linux check box should already
be selected. If it is not, select it to automatically select
all packages for installation.
11 Click Accept to install all of the Novell Client for Linux
packages.
12 Start the Novell Client for Linux.
See “Starting or Restarting the Novell Client for Linux”
on page 2.
For more information, see “Using the Novell Client Tray
Application” in the Novell Client for Linux User Guide.
Starting or Restarting the Novell Client for Linux
Use any of the following methods to start or restart the
Novell Client for Linux:
Restart the Linux Workstation: This is the best way
to ensure that the Novell Client for Linux is completely
restarted.
Manually Start the Novell Client: Open a terminal
window and log in as root. Run the following
commands:
New Installations:
rcnovell-xregd start
This command loads XTier registry service that is
needed by Novell Client for Linux daemon
modules.
rcnovfsd start
This command loads Novell file system kernel
module and daemon modules of Novell Client for
Linux.
Updates:
rcnovell-xregd restart
This command stops and reloads XTier registry
service that is needed by Novell Client for Linux
daemon modules.
rcnovfsd restart
This command stops and reloads Novell file
system kernel module and daemon modules of
Novell Client for Linux.
Manually launch Novell Client tray application by
running the command
/opt/novell/ncl/bin/
ncl_tray
either on the command line of a terminal
window or in Run Application utility that can be
launched by pressing Alt-F2.
If any of these commands display any errors, restart
the Linux* machine.
USING THE INSTALLATION SCRIPT TO INSTALL THE
NOVELL CLIENT
NOTE: An installation script called
ncl_install is
provided in the Novell Client for Linux
.iso file that you
downloaded from Novell Downloads (http://
download.novell.com). This script can be used to install,
update, verify installation, display information, and uninstall
the Novell Client directly from a command prompt using
documented RPM commands. This same script is copied to
the
/opt/novell/ncl/bin directory during the installation
of the Client for later use in verifying or uninstalling the
Client.
WARNING: You must not use the
ncl_install script for
install and uninstall operations on OES2 SP2.
Run these commands from the directory in which you have
mounted the Client download file or from
/opt/novell/
ncl/bin
after the initial installation. You must be logged in
as
root to run these commands.
Table 1 ncl_install Commands
UPGRADING FROM VERSION 2.0 SP1
NOTE: Upgrading from an earlier version of the Novell
Client for Linux is not supported. You must upgrade your
workstation to atleast Novell Client version 2.0 SP1 before
upgrading to 2.0 SP3.
To use YaST to upgrade from the Novell Client 2.0 SP1 for
Linux to 2.0 SP3, follow these steps. You can also use the
ncl_install script to upgrade to 2.0 SP3 (see “Using the
Installation Script to Install the Novell Client” on page 2 for
more information).
1Launch the YaST Control Center.
GNOME: Click Computer > More Applications >
System > YaST.
KDE: Click the menu button > System > YaST.
Command Description
./ncl_install install Installs the Novell Client for
Linux.
./ncl_install install
force
Forces the installation of all
Novell Client for Linux
packages.
./ncl_install upgrade Upgrades the Novell Client for
Linux.
./ncl_install upgrade
force
Forces the upgrade of all Novell
Client for Linux packages.
./ncl_install
uninstall
Uninstalls all Novell Client for
Linux packages.
./ncl_install verify Verifies the installation of all
installed Novell Client for Linux
packages.
./ncl_install
information
Displays summary information
for all installed Novell Client for
Linux packages.
./ncl_install files Displays a list of all files
contained in the Novell Client for
Linux packages.

novdocx (en) 13 May 2009
3
2Click Software > Installation Source.
3Select the Novell Client 2.0 for Linux source, click
Delete, then click Yes.
4Click Finish.
5In the YaST Control Center, click Software > Add-on
Product.
6Select your Novell Client 2.0 SP3 for Linux installation
source (such as CD or Local Directory), then click
Next.
7Follow the on-screen instructions for the installation
source you specified in Step 6.
For example, you might be prompted to insert the
Novell Client for Linux CD, or to specify which local
directory contains a copy of the downloaded Novell
Client for Linux files.
8Select Yes, I Agree to the License Agreement, then
click Next.
If you see Dependency Conflict messages informing
you that the Novell Client cannot be installed because
of missing NICI and NMASTM dependencies:
8a Select Install novell-nmasclient although it would
change the architecture, then click OK– Try Again.
8b Select Install nici although it would change the
architecture, then click OK– Try Again.
9Select Patterns from the Filter drop-down list.
10 Make sure Novell Client for Linux is selected in the
Pattern list. It should already have a check mark in the
check box.
You should see all of the Novell Client for Linux
packages in the package summary list. All packages
should be selected for installation.
11 Select all the Novell Client for Linux packages that are
not selected.
12 Right-click the
novell-client package in the
package summary list, then select All in This List >
Update if newer version available.
The icons to the left of the packages in the package
summary list change from a check mark to the update
symbol.
13 Click Accept to install all of the selected packages.
You will see all the packages being installed on the
Package Installation dialog box, followed by the
SuSEconfig dialog box.
14 Start the Novell Client for Linux.
See “Starting or Restarting the Novell Client for Linux”
on page 2.
If Novell Client 2.0 SP1 is installed on SLED 10 SP1 or
SLED 10 SP2 system and you upgrade your operating
system to SLED 10 SP3, then some undesired files and
directories are not removed. These files and directories
prevent users from logging into the system using the
Greeter screen as the Gnome Session Manager crashes.
You must login as root and run the following commands
either before or after an upgrade:
cd /home
rm -f `find . -name "ncl*.desktop" -print`
rmdir `find . -name "ncl*.desktop" -print`
cd /root
rm -f `find . -name "ncl*.desktop" -print`
rmdir `find . -name "ncl*.desktop" -print`
rm -f /etc/profile.d/novell-ncl-tray.sh
For NCL 2.0 SP1 running on SLED 10 SP3, the ncl_tray
does not autostart even after executing these commands.
However, it can be started manually. We recommend you to
upgrade to NCL 2.0 SP3.
UNINSTALLING THE NOVELL CLIENT FOR LINUX
Use either of the following methods to uninstall the Novell
Client for Linux:
“Using the YaST Control Center to Uninstall” on page 3
“Using the Installation Script to Uninstall” on page 4
Using the YaST Control Center to Uninstall
1Launch the YaST Control Center.
GNOME: Click Computer > More Applications >
System > YaST.
KDE: Click the menu button > System > YaST.
2Click Software in the left column, then click Software
Management in the right column.
3Select Patterns from the Filter drop-down list.
4Select Novell Client for Linux from the Additional
Software category to see the list of installed packages.
5Click the check box to the left of Novell Client for Linux
until a trash can appears.
This automatically selects all of the packages that
need to be deleted by changing their icons to a trash
can.
If any of the Novell Client for Linux package is not
automatically changed to the trash can, you must
change it manually.
6Right-click the
novell-client package, select All in
This List, then click Delete.
7Click Accept to delete all of the selected packages.
YaST might display the following dependency conflict:

novdocx (en) 13 May 2009
4
product:Client_for_Linux-2.0.0.i686 has
missing dependencies
If YaST displays this dependency conflict, select delete
Client_for_Linux, then click OK - Try Again.
YaST displays the progress of the uninstall.
Using the Installation Script to Uninstall
To uninstall the Novell Client for Linux using the installation
script, enter
./ncl_install uninstall in a terminal
window. You can run this command from the directory
where you unarchived the Client download file or from the
/
opt/novell/ncl/bin
directory. You must be logged in as
root to run this command.
Legal Notice
Copyright © 2009 Novell, Inc. All rights reserved. No part of
this publication may be reproduced, photocopied, stored on
a retrieval system, or transmitted without the express
written consent of the publisher. For a list of Novell
trademarks, see the Novell Trademark and Service Mark
list (http://www.novell.com/company/legal/trademarks/
tmlist.html). All third-party trademarks are the property of
their respective owners. A trademark symbol (®, TM, etc.)
denotes a Novell trademark; an asterisk (*) denotes a third-
party trademark.