Novell SUSE LINUX ENTERPRISE SERVER 10 STORAGE User manual

www.novell.com
INSTALLATION
novdocx (ENU) 01 February 2006
SUSE Linux Enterprise Desktop 10 Installation Quick Start
SUSE®Linux Enterprise
Desktop
10
June 1, 2006
Welcome to SUSE Linux Enterprise
Desktop
SUSE Linux* Enterprise Desktop (SLED) offers a stable and secure working environment packed
with easy-to-use business software and services. SLED offers both GNOME* and KDE desktops
as well as leading Novell products and services to create a work environment that helps you
capture and share business information.
For more detailed installation instructions and deployment strategies, see the SUSE Linux
Enterprise Desktop Deployment Guide (http://www.novell.com/documentation/sled10/pdfdoc/
sled10_deployment/sled10_deployment.pdf).
SYSTEM REQUIREMENTS
⌧Personal computer with a Pentium* III 500 MHz or higher processor (Pentium 4 2.4 GHz or
higher or any AMD64 for Intel* EM64T processor recommended)
⌧256 MB physical RAM (512 MB recommended)
⌧800 MB available disk space (2.5 GB recommended)
⌧800 x 600 display resolution (1024 x 768 or higher recommended)
INSTALLING SUSE LINUX ENTERPRISE DESKTOP
Use these instructions if there is no existing Linux system on you machine or if you want to replace
an existing Linux system. See “Updating SUSE Linux Enterprise Desktop” on page 5 for
information on updating an NLD 9 system to SLED 10.
1Insert the SUSE Linux Enterprise Desktop CD 1 or DVD into the drive, then reboot the
computer to start the installation program.
2Select Installation on the boot screen, then press Enter.
This loads the SUSE Linux Enterprise Desktop installation program and starts the installation
in normal mode. You can also select from the following options:
• Boot from Hard Disk: Boots the system already installed on the hard drive (the
system that is normally booted when the machine is started).

novdocx (ENU) 01 February 2006
• Installation—ACPI Disabled: If the normal installation fails, it could be because the
system hardware doesn’t support the Advanced Configuration and Power Interface
(ACPI). If this seems to be the case, use this option to install without ACPI support.
• Installation—Local APIC Disabled: If the normal installation fails, it could be
because the system hardware doesn’t support the local Advanced Programmable
Interrupt Controller (APIC). If this seems to be the case, use this option to install
without local APIC support.
• Installation—Safe Settings: Boots the system with the DMA mode (for CD-ROM
drives) and any interfering power management functions disabled. You can also use
the command line to enter or change kernel parameters.
• Rescue System: If you are unable to boot into your installed Linux system, you can
boot the computer from the CD using this option. This starts a minimal Linux system
without a graphical user interface, which lets you access disk partitions for
troubleshooting and repairing the installed system.
• Memory Test: Tests your system RAM by means of repeated read and write cycles.
This is done in an endless loop because memory corruption often shows up
sporadically and many read and write cycles might be necessary to detect it. If you
suspect that your RAM is defective, start this test and let it run for several hours. If no
errors are found after a long period of time, you can assume that the memory is intact.
End the test by rebooting the system.
3Select the language to be used during the installation and for the installed system, then click
Next.
4Read the License Agreement, click Yes, I Agree to the License Agreement, then click Next.
5Select New Installation, then click Next:
6Select the clock and time zone to use in your system, then click Next.
7Use the Installation Settings screen to view the hardware detected and to view a number of
proposed installation and partitioning options, then select your desired options.
The Overview tab contains options that sometimes need manual intervention (in most
common installation situations). The Expert tab contains special options, described below.
IMPORTANT: If you do not make any changes to the Software selections, GNOME is
installed as the default desktop environment. To install KDE, click Software and select KDE.
Depending on your available disk space, you can choose to install both the GNOME and
KDE desktops.
After configuring any of the items presented in these dialogs, you are always returned to the
Installation Settings screen, which is updated accordingly.
• System: Detects system hardware and lets you save the results to a floppy or file.
• Keyboard Layout: Lets you change the previously selected keyboard layout. By
default, the layout corresponds to the selected language.

novdocx (ENU) 01 February 2006
• Partitioning: Lets you customize the partitioning. In most cases, SUSE Linux
Enterprise Desktop proposes a reasonable partitioning scheme that can be accepted
without change.
For more information on partitioning options, see “Section 3.7.1: Partitioning” in the
SUSE Linux Enterprise Desktop Deployment Guide (http://www.novell.com/
documentation/sled10/pdfdoc/sled10_deployment/sled10_deployment.pdf).
• Add-On Products: Use this option to install additional products from a separate media
source. You can select various types of product media such as CD, DVD, or local
directory. You can also work directly with .ISO files (select Local Directory > ISO
Image).
• Software: SUSE Linux Enterprise Desktop offers several types of software packages
with various installation scopes. Use this option to change the selected desktop
environment and to add or remove packages and filters.
•Booting:During the installation, SUSE Linux Enterprise Desktop proposes a boot
configuration for your system. You should normally leave these setting unchanged, but
you can use this option if you need a custom setup.
You can configure the boot mechanism to rely on a special boot floppy. Although this
means that the boot floppy must be in the drive when booting, it leaves an existing boot
mechanism untouched. This is usually unnecessary because YaST can configure the
boot loader to also boot existing operating systems.
You can also use the boot configuration to change the location of the boot mechanism
on the hard disk.
For more information, see “Section 17.3: Configuring the Boot Loader with YaST” in
the SUSE Linux Enterprise Desktop Deployment Guide (http://www.novell.com/
documentation/sled10/pdfdoc/sled10_deployment/sled10_deployment.pdf).
• Time Zone: Lets you select a time zone. You can also set the hardware clock to Local
Time or UTC. If you set the hardware clock to UTC, your system can rely on SUSE
Linux Enterprise Desktop to switch between standard time and daylight saving time
automatically. Set the clock to Local Time if you are dual booting.
• Language: Lets you change the language you selected in Step 3 on page 2. You can
also change the language when you log in.
• Default Runlevel: Lets you define how the system is started after booting. Use the
default runlevel 5: Full Multiuser with Network and xdm (you will be prompted to log in
directly under a graphical interface). Do not change the runlevel unless instructed to do
so by your system administrator.
8When you are finished configuring the installation settings, click Accept.
9Click Accept to accept each license agreement, then click Install to begin the installation.

novdocx (ENU) 01 February 2006
After completing the basic system setup and the installation of all selected software
packages, the SUSE Linux Enterprise Desktop installation boots into the new Linux system,
after which you can create users, configure the hardware, and set up system services.
If you are installing from CD, leave CD 1 in your CD-ROM drive during the reboot and do not
select any installation options. When the reboot is finished, the installation continued and you
are prompted to insert the remaining CDs.
10 Enter a name for this computer and the DNS domain that it belongs to, then click Next.
11 Type a password for the system administrator account (called the root user, or root), then
click Next.
Unlike regular users who might or might not have permission to do certain things on the
system, root has unlimited power to do anything, including change the system
configuration, install programs, set up new hardware, and change user passwords. The
root account should be used only for system administration, maintenance, and repair.
Logging in as root for daily work can be risky, because a single mistake could lead to the
irretrievable loss of system files.
You should never forget the root password. After you enter it here, the password cannot be
retrieved. It can only be reset with administrative assistance.
12 In the Network Configuration screen, view or change the network connections of your
system, then click Next.
If you have network devices (for example, network or wireless cards, a DSL connection,
ISDN adapter, or modem), it is a good idea to configure them now, because an Internet
connection allows SUSE Linux Enterprise Desktop to retrieve any available updates and
include them in the installation.
The network hardware can also be configured after the system installation has been
completed. See the SUSE Linux Enterprise Desktop 10 GNOME User Guide (http://
www.novell.com/documentation/sled10/userguide_gnome/data/bktitle.html) and the SUSE
Linux Enterprise Desktop 10 KDE User Guide (http://www.novell.com/documentation/sled10/
pdfdoc/userguide_kde/userguide_kde.pdf) for more information.
To skip the network configuration, click Skip Configuration > Next.
13 To test your Internet connection, click Yes, Test Connection to the Internet > Next.
This option also checks for the latest SUSE Linux Enterprise Desktop release notes. If you
don’t want to test the connection at this point, click No, Skip This Test > Next. This also skips
checking for updated release notes.
14 On the Running Internet Connection Test screen, view the results of the test, then click Next
to continue.
15 On the Novell Customer Center Configuration screen, click Configure Now > Next >
Continue to enable your system for online updates.

novdocx (ENU) 01 February 2006
Click Configure Later > Next to skip this step and continue the installation. You can configure
this option after the product has been installed.
If online updates are available and you want to install them, select Run Update on the Online
Update screen, then click Next. To skip the online updates, select Skip Update, then click
Next. You can update your system any time after installation.
16 In the User Authentication Method screen, select Local (/etc/passwd), unless instructed
otherwise by your system administrator, then click Next.
17 To create your user account, type your first and last name in the User’s Full Name field, a
username in the Username field, and a password (as recommended by your system
administrator) in the Password field.
For security reasons, your password should be at least eight characters long and should
contain both uppercase and lowercase letters and numbers. The maximum length for
passwords is 72 characters, and passwords are case sensitive.
18 Click Next to complete the User Authentication setup and start the system configuration.
19 After the system configuration has completed, view the Release Notes, then click Next.
20 Use the Hardware Configuration screen to view or configure your graphics card and other
hardware devices, then click Next.
Click a component to start its configuration. For the most part, the SUSE Linux Enterprise
Desktop installation detects and configures the devices automatically.
If you prefer not to perform this action right now, click Skip Configuration > Next. You can
configure these items later, but we recommend that you configure the graphics card now.
Although the display settings autoconfigured by SUSE Linux Enterprise Desktop should be
generally acceptable, you might have strong preferences as far as resolution, color depth,
and other graphics features are concerned. For more information, see “Section 7.13: SaX2”
in the SUSE Linux Enterprise Desktop Deployment Guide (http://www.novell.com/
documentation/sled10/pdfdoc/sled10_deployment/sled10_deployment.pdf).
21 On the Installation Completed screen, click Finish to close the SUSE Linux Enterprise
Desktop installation and continue to the login screen.
22 Type your username in the Username field, then press Enter.
23 Type your password in the Password field, then press Enter.
UPDATING SUSE LINUX ENTERPRISE DESKTOP
Use these instructions to update a Novell Linux Desktop 9 system to SUSE Linux Enterprise
Desktop 10. Configuration settings from your existing system are preserved whenever possible.
1Insert the SUSE Linux Enterprise Desktop CD 1 or DVD into the drive, then reboot the
computer to start the installation program.
2Select Installation on the boot screen, then press Enter.

novdocx (ENU) 01 February 2006
3Select the language to be used during the installation and for the installed system, then click
Next.
4Read the License Agreement, click Yes, I Agree to the License Agreement, then click Next to
continue the installation.
5Select Update, then click Next:
6Select the partition or system to update, then click Next.
7In the Installation Settings screen, adjust the settings according to your requirements.
You can usually leave the default settings untouched, but if you intend to enhance your
system, select the packages offered in the Update Options submenu or add support for
additional languages.
You can also make backups of various system components. Selecting backups slows down
the update process. Use this option if you do not have a recent system backup.
8When you are finished configuring the installation settings, click Accept.
9Click I Agree to accept each license agreement, then click Start Update to begin the
installation
After completing the basic system setup and the installation of all selected software
packages, the SUSE Linux Enterprise Desktop installation boots into the new Linux system,
after which you can create users, configure the hardware, and set up system services.
If you are installing from CD, leave CD 1 in your CD-ROM drive during the reboot and do not
select any installation options. When the reboot is finished, the installation continues and you
are prompted to insert the remaining CDs.
10 To test your Internet connection, click Yes, Test Connection to the Internet > Next.
This option also checks for the latest SUSE Linux Enterprise Desktop release notes. If you
don’t want to test the connection at this point, click No, Skip This Test > Next. This also skips
checking for updated release notes.
11 On the Running Internet Connection Test screen, view the results of the test, then click Next
to continue.
12 On the Novell Customer Center Configuration screen, click Configure Now > Next >
Continue to enable your system for online updates.
Click Configure Later > Next to skip this step and continue the installation. You can configure
this options after the product has been installed.
If online updates are available and you want to install them, select Run Update on the Online
Update screen, then click Next. To skip the online updates, select Skip Update, then click
Next. You can update your system any time after installation.
13 After the system configuration has completed, view the Release Notes, then click Next.
14 On the Installation Completed screen, click Finish to close the SUSE Linux Enterprise
Desktop installation and continue to the login screen.

novdocx (ENU) 01 February 2006
15 Type your username in the Username field, then press Enter.
16 Type your password in the Password field, then press Enter.
CONFIGURING SUSE LINUX ENTERPRISE DESKTOP
For information on using and configuring SUSE Linux Enterprise Desktop, see the SUSE Linux
Enterprise Desktop 10 GNOME User Guide (http://www.novell.com/documentation/sled10/
userguide_gnome/data/bktitle.html) and the SUSE Linux Enterprise Desktop 10 KDE User Guide
(http://www.novell.com/documentation/sled10/pdfdoc/userguide_kde/userguide_kde.pdf).
Copyright © 2006 Novell, Inc. All rights reserved. No part of this publication may be reproduced, photocopied, stored on a retrieval system, or
transmitted without the express written consent of the publisher. For a list of Novell trademarks, see the Novell Trademark and Service Mark list
(http://www.novell.com/company/legal/trademarks/tmlist.html). All third-party trademarks are the property of their respective owners. A
trademark symbol (®, TM, etc.) denotes a Novell trademark; an asterisk (*) denotes a third-party trademark.