Novell SUSE LINUX ENTERPRISE SERVER 10 STORAGE User manual

Use the following procedures to install a new version of SUSE® Linux Enterprise Server 11. This document gives
a quick overview about how to run through the default installation of a SUSE Linux Enterprise Server.
Welcome to SUSE Linux Enterprise
Server
For more detailed installation instructions and deployment
strategies, see the SUSE Linux Enterprise Documentation at
http://www.novell.com/documentation/.
System Requirements
• Personal computer with a Pentium* III 500 MHz or higher
processor (Pentium 4 2.4 GHz or higher or any AMD64
for Intel* EM64T processor recommended)
• 512 MB physical RAM (1 GB recommended)
• 2 GB available disk space (more recommended)
•800 x 600 display resolution (1024 x 768 or higher recom-
mended)
Installing SUSE Linux Enterprise Server
Use these instructions if there is no existing Linux system
on you machine or if you want to replace an existing Linux
system.
1. Insert the SUSE Linux Enterprise Server DVD into the
drive, then reboot the computer to start the installation
program.
2. Select Installation on the boot screen, then press Enter.
This loads the SUSE Linux Enterprise Server installation
program and starts the installation in normal mode.
Installation Quick Start
SUSE Linux Enterprise Server 11
NOVELL® QUICK START CARD
1

3. Select the language to be used during the installation
and for the installed system.
4. Read the License Agreement and click Yes, I Agree to
the License Agreement. Proceed with Next.
5. Decide if you want to accomplish a New Installation
or an update from a previous version of SUSE Linux
Enterprise. Proceed with Next.
6. Select the clock and time zone to use in your system.
Proceed with Next.
7. Decide if you want to install as primary operating sys-
tem on a Physical Machine, as a virtual guest inside a
XEN machine by selecting Virtual Machine, or as a vir-
tualization host that can run other virtual machines
with the option XEN Virtualization Host. Proceed with
Next.
8. Use the Installation Settings screen to view a number
of proposed installation and partitioning options, then
change your desired options if necessary.
The Overview tab contains options that sometimes need
manual intervention (in most common installation situ-
ations). The Expert tab contains special options, de-
scribed below.
IMPORTANT
If you do not make any changes to the Soft-
ware selections, GNOME is installed as the de-
fault desktop environment. To install KDE, click
Software and select KDE. Depending on your
2

available disk space, you can choose to install
both desktops. Proceed with Install.
9. Click Accept to accept any license agreements.
10. Start the installation with Install.
After completing the basic system setup and the instal-
lation of all selected software packages, the SUSE Linux
Enterprise Server installation boots into the new Linux
system. After the reboot you will see the following
screen:
11. Type a password for the system administrator account
(called the root user).
You should never forget the root password! After you
entered it here, the password cannot be retrieved. It
can only be reset with administrative assistance. Pro-
ceed with Next.
12. Enter a name for this computer and the DNS domain
that it belongs to. Proceed with Next.
13. In the Network Conguration screen, view or change
the network connections of your system.
If you have network devices (for example, network or
wireless cards, a DSL connection, ISDN adapter, or
modem), it is a good idea to congure them now, be-
cause an Internet connection allows SUSE Linux Enter-
prise Server to retrieve any available updates and in-
clude them in the installation. Proceed with Next.
3

14. Test your Internet connection with Yes, Test Connection
to the Internet. This option also checks for the latest
SUSE Linux Enterprise Server release notes. Proceed
with Next.
15. View the results of the test on the Running Internet
Connection Test screen. Proceed with Next.
16. Enable on the Novell Customer Center Conguration
screen your system for online updates with Congure
Now > Next > Continue.
Click Congure Later > Next to skip this step and con-
tinue the installation. You can congure this option
after the product has been installed. Proceed with Next.
17. By default, SUSE Linux Enterprise Server creates a cer-
ticate for the system. To disable this, click Skip Con-
guration > Next. Proceed with Next.
18. Select Local (/etc/passwd) in the User Authentication
Method screen, unless instructed otherwise by your
system administrator. Proceed with Next.
19. Type your rst and last name in the User’s Full Name
eld, your login name in the Username eld, and your
4

password (as recommended by your system administra-
tor) in the Password eld.
For security reasons, your password should be at least
eight characters long and should contain both upper-
case and lowercase letters and numbers. The maximum
length for passwords is 72 characters, and passwords
are case sensitive. Proceed with Next.
20. View the Release Notes after the system conguration
has completed. Proceed with Next.
21. Use the Hardware Conguration screen to view or
congure your graphics card and other hardware de-
vices. Proceed with Next.
22. On the Installation Completed screen, click Finish to
close the SUSE Linux Enterprise Server installation and
continue to the login screen.
23. Click on your username, and type your password in the
Password eld, then press Enter.
Legal Notice
All content is copyright © 2006- 2009 Novell, Inc.
This manual is protected under Novell intellectual property
rights. By reproducing, duplicating or distributing this
manual you explicitly agree to conform to the terms and
conditions of this license agreement.
This manual may be freely reproduced, duplicated and dis-
tributed either as such or as part of a bundled package in
electronic and/or printed format, provided however that
the following conditions are fullled:
That this copyright notice and the names of authors and
contributors appear clearly and distinctively on all repro-
duced, duplicated and distributed copies. That this manual,
specically for the printed format, is reproduced and/or
distributed for noncommercial use only. The express autho-
rization of Novell, Inc must be obtained prior to any other
use of any manual or part thereof.
For Novell trademarks, see the Novell Trademark and Ser-
vice Mark list http://www.novell.com/company/
legal/trademarks/tmlist.html. Linux* is a regis-
tered trademark of Linus Torvalds. All other third party
trademarks are the property of their respective owners. A
trademark symbol (®, ™ etc.) denotes a Novell trademark;
an asterisk (*) denotes a third party trademark.
All information found in this book has been compiled with
utmost attention to detail. However, this does not guarantee
complete accuracy. Neither Novell, Inc., SUSE LINUX Prod-
ucts GmbH, the authors, nor the translators shall be held
liable for possible errors or the consequences thereof.
5

Created by SUSE® with XSL-FO
6