
6
03
• When charging, please straighten the adapter wire so that it does not get entangled or damaged.
• Charing duration should not exceed 3 hours.
• DO NOT charge the unit with third-party, non-original or unauthorized adapter.
• The adapter indicator illuminates in green when it is connected to a power supply.
• The foot massager has a built-in lithium-ion battery to facilitate unit portability.
• A fully charged battery can support up to 2.5 to 3 hours of full foot massage function.
• A fully charged battery can support up to 5 hours of top cover vibration massage function.
Connect the adapter to the unit and turn on the power supply to power the unit/charge the built-in
lithium-ion battery. When the battery runs low, user can charge it with the adapter provided. The
battery will take about 3 hours to be fully charged.
This product can accommodate user up to 120 Kg.
01
OPERATING NOTES
Remove the top cover to use the base unit as a foot massager.
Follow the operating notes as follows.
FOOT MASSAGER
Each foot massage cycle is programmed with an auto timer of 10 minutes.
Press the power on/off button to power on/off the unit.
flashes in red to indicate battery power is running low.
Press the mode button consecutively to select the preferred
operating mode and its corresponding indicator illuminates on the
selected setting.
Press the heat button to activate/deactivate the heating function.
Illuminates in red indicates heating function is activated.
Press the intensity button consecutively to select the preferred
massage intensity and its corresponding indicator illuminates on
the selected setting.
Illuminates in green indicates vibration, airbags and massage roller functions
are activated.
Illuminates in yellow indicates only the airbags function is activated.
Illuminates in red indicates both vibration and massage roller functions are
activated.
Illuminates in green indicates low massage intensity.
Illuminates in yellow indicates medium massage intensity.
Illuminates in red indicates high massage intensity.
Power On/Off Mode Heat Intensity
TOP VIEW