TOOL USE AND CARE
Disconnect the power from the lantern and place the switch in the locked or off position
before servicing, adjusting, installing accessories or attachments, or storing. Such
preventive safety measures reduce the risk of accidental starting.
NOTE: The lantern needs to charge in full sunlight for 8 hours to allow the rechargeable
batteries to reach maximum capacity.
If LEDs do not light, wipe both ends of the batteries with a clean and dry cloth.
OPERATION
1. To recharge the batteries with solar power, turn the panel to face the sunlight. Charging time
about 8 hours (full sunlight).
2. Simply push the switch to turn on.
3. Use the handle to carry or hang the solar lantern.
MAINTENANCE
WARNING: Make sure this lantern is disconnected from its power source before
attempting any maintenance, cleaning, or inspection.
CLEANING
Use only soap and a damp cloth to clean your solar lantern. Many household cleaners are harmful
to plastics and other insulation. Never let liquid get inside a lantern.