NSI TORK WFTU40 User manual
PROGRAMMING INSTRUCTIONS
INSTRUCTIONS DE PROGRAMMATION
INSTRUCCIONES DE PROGRAMACIÓN
ONE YEAR LIMITED WARRANTY: If this product fails because
of a manufacturing defect within one year after purchase, we
will, at our option, either repair or replace it at no charge. Our
warranty does not cover damage caused by accident, abuse
or misuse. We assume no further liability with respect to the
sale or use of this product. THIS WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
THE WARRANTY OF MERCHANTABILITY. We make no warranty
with respect to the fitness of any goods for the users particular
application. This warranty gives you specific legal rights, and
you also may have other rights which vary from state to state.
It is our intent to provide accurate and current specification
information. However, in the interest of product improvement,
TORK may alter the specifications or constructional details
without prior notice.
1. Make sure router is connected to the internet and
working properly
2. Make sure phone or tablet you plan to use for Smart
devices is connected to your Wi-Fi router
3. Download the TORK app on your phone or IPad.
4. Register your TORK app
• Enter country from drop down menu in 1st space
• Type in known email account in 2nd space
- This will be your App username
• Press and release Next
• Type in known password
- This will be your App password
5. Plug Smart device needing connection into outlet
closest to router
• This will help ensure successful setup connection
• You can relocate Smart device at needed location
after setup is successful
6. Push and hold On/Off button on Smart device for 30
seconds to ensure device is reset
• LED light on Smart device will blink rapidly if
reset is successful
7. Press and release Add Device on screen
8. Press and release Electrical Outlet on screen
9. Confirm indicator on Smart device is blinking On/Off
red light rapidly
• If not, push and hold On/Off button on smart
device for 30 seconds to reset
10. Press and release Confirm indicator rapidly blink
on screen
11. Enter router password
• This may already be entered
12. Press and release Confirm on screen
• The Connection Now screen will show your
connection progress
• If setup connection is successful you will see
Successfully Added 1 Device and Smart device will
stop blinking
• If setup is not successful repeats steps 1 thru 4 &
7 thru 12.
13. Press and release “Done” on screen
14. Press and release large Button in middle of screen
to test connection
• Smart device should cycle On & Off
NOTES/ NOTES/ NOTAS:
You must have internet for this device to work outside
the range of the router/ Vous devez avoir un accès Internet pour
faire fonctionner cet appareil hors de la portée du routeur/ Debe
tener Internet para que este dispositivo funcione fuera del alcance
del enrutador
You must have a router for this device to work with your phone app/
Vous devez avoir un routeur pour faire fonctionner cet appareil à
l’aide de votre application mobile/Debe tener un enrutador para que
este dispositivo funcione con su aplicación de teléfono
• See your routers manual if this needs to be changed/Consulter le
manuel d’utilisation de votre routeur si des modifications doivent
être apportées/ Consulte el manual de su enrutador si necesita
cambiarlos
• Make note of your routers final SSID __________________
Noter le nom du réseau sans fil de votre routeur
Anote el SSID final de su enrutador
• Make note of your routers Password __________________
Noter le mot de passe de votre routeur
Anote la contraseña de su enrutador
LI-1124(A)
WFTU40
WI-FI TIME SWITCH
FOR TECHNICAL SUPPORT: SOUTIEN TECHNIQUE : PARA COMUNICARSE CON EL SERVICIO TÉCNICO: [email protected] 888.500.4598 NSi Industries LLC ·•USA •· www.nsiindustries.com
15. Remove and relocate Smart device to desired outlet
location
• Once Smart device is plugged into outlet red light
should blink momentarily
• Smart device red light will stop blinking once
router connection is reestablished
16. Retest connection by pressing and releasing large
button in middle of screen
17. Press and release Back at top left of screen
• You are now located at the control screen
18. Push and release “+” sign located at top right of
control screen
19. Repeat steps 5 thru 17
Connecting Smart Device to (Alexa) Echo Dot
Open Amazon Alexa App
Choose top left menu from home page of Alexa App
Choose Skills from menu
Type in “Smart Life” in search box located at top of
screen and choose search
Choose Smart Life Skill in menu
Choose Enable
Enter email address and password used in TORK app
Choose Link Now
Choose Authorize
Choose done in upper left hand corner
Choose top left menu from home page of Alexa App
Choose smart home from menu
Choose plus sign + above Add Device
• Alexa will discover all devices in set up in TORK
network
• Each smart device will use the TORK network
default name
Testing Alexa (Echo Dot) Voice Commands
From the smart home screen on your Alexa App identify
the name of the smart devices i.e. SmartHome
Ask Alexa to turn on SmartHome smart device by saying
“Alexa, turn on SmartHome”.
Alexa will turn on the Smart Device and respond with OK.
Ask Alexa to turn off SmartHome smart device by saying
“Alexa, turn off SmartHome”.
Alexa will turn off the Smart Device and respond with OK.
Connecting Smart Device to Google Home
Open Google Home App
Choose top left menu from home page of Google Home
Choose Home Control from menu
Push plus sign + at bottom right hand corner
Scroll through list and locate Smart Life
Choose Smart Life
Enter email address and password used in TORK app
Choose Link Now
Choose authorize
Choose done
Test by asking Google “Hey google, turn on everything”
PROGRAMMING INSTRUCTIONS
INSTRUCTIONS DE PROGRAMMATION
INSTRUCCIONES DE PROGRAMACIÓN
ONE YEAR LIMITED WARRANTY: If this product fails because
of a manufacturing defect within one year after purchase, we
will, at our option, either repair or replace it at no charge. Our
warranty does not cover damage caused by accident, abuse
or misuse. We assume no further liability with respect to the
sale or use of this product. THIS WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
THE WARRANTY OF MERCHANTABILITY. We make no warranty
with respect to the fitness of any goods for the users particular
application. This warranty gives you specific legal rights, and
you also may have other rights which vary from state to state.
It is our intent to provide accurate and current specification
information. However, in the interest of product improvement,
TORK may alter the specifications or constructional details
without prior notice.
1. Make sure router is connected to the internet and
working properly
2. Make sure phone or tablet you plan to use for Smart
devices is connected to your Wi-Fi router
3. Download the TORK app on your phone or IPad.
4. Register your TORK app
• Enter country from drop down menu in 1st space
• Type in known email account in 2nd space
- This will be your App username
• Press and release Next
• Type in known password
- This will be your App password
5. Plug Smart device needing connection into outlet
closest to router
• This will help ensure successful setup connection
• You can relocate Smart device at needed location
after setup is successful
6. Push and hold On/Off button on Smart device for 30
seconds to ensure device is reset
• LED light on Smart device will blink rapidly if
reset is successful
7. Press and release Add Device on screen
8. Press and release Electrical Outlet on screen
9. Confirm indicator on Smart device is blinking On/Off
red light rapidly
• If not, push and hold On/Off button on smart
device for 30 seconds to reset
10. Press and release Confirm indicator rapidly blink
on screen
11. Enter router password
• This may already be entered
12. Press and release Confirm on screen
• The Connection Now screen will show your
connection progress
• If setup connection is successful you will see
Successfully Added 1 Device and Smart device will
stop blinking
• If setup is not successful repeats steps 1 thru 4 &
7 thru 12.
13. Press and release “Done” on screen
14. Press and release large Button in middle of screen
to test connection
• Smart device should cycle On & Off
NOTES/ NOTES/ NOTAS:
You must have internet for this device to work outside
the range of the router/ Vous devez avoir un accès Internet pour
faire fonctionner cet appareil hors de la portée du routeur/ Debe
tener Internet para que este dispositivo funcione fuera del alcance
del enrutador
You must have a router for this device to work with your phone app/
Vous devez avoir un routeur pour faire fonctionner cet appareil à
l’aide de votre application mobile/Debe tener un enrutador para que
este dispositivo funcione con su aplicación de teléfono
• See your routers manual if this needs to be changed/Consulter le
manuel d’utilisation de votre routeur si des modifications doivent
être apportées/ Consulte el manual de su enrutador si necesita
cambiarlos
• Make note of your routers final SSID __________________
Noter le nom du réseau sans fil de votre routeur
Anote el SSID final de su enrutador
• Make note of your routers Password __________________
Noter le mot de passe de votre routeur
Anote la contraseña de su enrutador
LI-1124(A)
WFTU40
WI-FI TIME SWITCH
FOR TECHNICAL SUPPORT: SOUTIEN TECHNIQUE : PARA COMUNICARSE CON EL SERVICIO TÉCNICO: techsupport@nsiindustries.com 888.500.4598 NSi Industries LLC ·•USA •· www.nsiindustries.com
15. Remove and relocate Smart device to desired outlet
location
• Once Smart device is plugged into outlet red light
should blink momentarily
• Smart device red light will stop blinking once
router connection is reestablished
16. Retest connection by pressing and releasing large
button in middle of screen
17. Press and release Back at top left of screen
• You are now located at the control screen
18. Push and release “+” sign located at top right of
control screen
19. Repeat steps 5 thru 17
Connecting Smart Device to (Alexa) Echo Dot
Open Amazon Alexa App
Choose top left menu from home page of Alexa App
Choose Skills from menu
Type in “Smart Life” in search box located at top of
screen and choose search
Choose Smart Life Skill in menu
Choose Enable
Enter email address and password used in TORK app
Choose Link Now
Choose Authorize
Choose done in upper left hand corner
Choose top left menu from home page of Alexa App
Choose smart home from menu
Choose plus sign + above Add Device
• Alexa will discover all devices in set up in TORK
network
• Each smart device will use the TORK network
default name
Testing Alexa (Echo Dot) Voice Commands
From the smart home screen on your Alexa App identify
the name of the smart devices i.e. SmartHome
Ask Alexa to turn on SmartHome smart device by saying
“Alexa, turn on SmartHome”.
Alexa will turn on the Smart Device and respond with OK.
Ask Alexa to turn off SmartHome smart device by saying
“Alexa, turn off SmartHome”.
Alexa will turn off the Smart Device and respond with OK.
Connecting Smart Device to Google Home
Open Google Home App
Choose top left menu from home page of Google Home
Choose Home Control from menu
Push plus sign + at bottom right hand corner
Scroll through list and locate Smart Life
Choose Smart Life
Enter email address and password used in TORK app
Choose Link Now
Choose authorize
Choose done
Test by asking Google “Hey google, turn on everything”
PROGRAMMING INSTRUCTIONS
INSTRUCTIONS DE PROGRAMMATION
INSTRUCCIONES DE PROGRAMACIÓN
ONE YEAR LIMITED WARRANTY: If this product fails because
of a manufacturing defect within one year after purchase, we
will, at our option, either repair or replace it at no charge. Our
warranty does not cover damage caused by accident, abuse
or misuse. We assume no further liability with respect to the
sale or use of this product. THIS WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
THE WARRANTY OF MERCHANTABILITY. We make no warranty
with respect to the fitness of any goods for the users particular
application. This warranty gives you specific legal rights, and
you also may have other rights which vary from state to state.
It is our intent to provide accurate and current specification
information. However, in the interest of product improvement,
TORK may alter the specifications or constructional details
without prior notice.
1. Make sure router is connected to the internet and
working properly
2. Make sure phone or tablet you plan to use for Smart
devices is connected to your Wi-Fi router
3. Download the TORK app on your phone or IPad.
4. Register your TORK app
• Enter country from drop down menu in 1st space
• Type in known email account in 2nd space
- This will be your App username
• Press and release Next
• Type in known password
- This will be your App password
5. Plug Smart device needing connection into outlet
closest to router
• This will help ensure successful setup connection
• You can relocate Smart device at needed location
after setup is successful
6. Push and hold On/Off button on Smart device for 30
seconds to ensure device is reset
• LED light on Smart device will blink rapidly if
reset is successful
7. Press and release Add Device on screen
8. Press and release Electrical Outlet on screen
9. Confirm indicator on Smart device is blinking On/Off
red light rapidly
• If not, push and hold On/Off button on smart
device for 30 seconds to reset
10. Press and release Confirm indicator rapidly blink
on screen
11. Enter router password
• This may already be entered
12. Press and release Confirm on screen
• The Connection Now screen will show your
connection progress
• If setup connection is successful you will see
Successfully Added 1 Device and Smart device will
stop blinking
• If setup is not successful repeats steps 1 thru 4 &
7 thru 12.
13. Press and release “Done” on screen
14. Press and release large Button in middle of screen
to test connection
• Smart device should cycle On & Off
NOTES/ NOTES/ NOTAS:
You must have internet for this device to work outside
the range of the router/ Vous devez avoir un accès Internet pour
faire fonctionner cet appareil hors de la portée du routeur/ Debe
tener Internet para que este dispositivo funcione fuera del alcance
del enrutador
You must have a router for this device to work with your phone app/
Vous devez avoir un routeur pour faire fonctionner cet appareil à
l’aide de votre application mobile/Debe tener un enrutador para que
este dispositivo funcione con su aplicación de teléfono
• See your routers manual if this needs to be changed/Consulter le
manuel d’utilisation de votre routeur si des modifications doivent
être apportées/ Consulte el manual de su enrutador si necesita
cambiarlos
• Make note of your routers final SSID __________________
Noter le nom du réseau sans fil de votre routeur
Anote el SSID final de su enrutador
• Make note of your routers Password __________________
Noter le mot de passe de votre routeur
Anote la contraseña de su enrutador
LI-1124(A)
WFTU40
WI-FI TIME SWITCH
FOR TECHNICAL SUPPORT: SOUTIEN TECHNIQUE : PARA COMUNICARSE CON EL SERVICIO TÉCNICO: [email protected] 888.500.4598 NSi Industries LLC ·•USA •· www.nsiindustries.com
15. Remove and relocate Smart device to desired outlet
location
• Once Smart device is plugged into outlet red light
should blink momentarily
• Smart device red light will stop blinking once
router connection is reestablished
16. Retest connection by pressing and releasing large
button in middle of screen
17. Press and release Back at top left of screen
• You are now located at the control screen
18. Push and release “+” sign located at top right of
control screen
19. Repeat steps 5 thru 17
Connecting Smart Device to (Alexa) Echo Dot
Open Amazon Alexa App
Choose top left menu from home page of Alexa App
Choose Skills from menu
Type in “Smart Life” in search box located at top of
screen and choose search
Choose Smart Life Skill in menu
Choose Enable
Enter email address and password used in TORK app
Choose Link Now
Choose Authorize
Choose done in upper left hand corner
Choose top left menu from home page of Alexa App
Choose smart home from menu
Choose plus sign + above Add Device
• Alexa will discover all devices in set up in TORK
network
• Each smart device will use the TORK network
default name
Testing Alexa (Echo Dot) Voice Commands
From the smart home screen on your Alexa App identify
the name of the smart devices i.e. SmartHome
Ask Alexa to turn on SmartHome smart device by saying
“Alexa, turn on SmartHome”.
Alexa will turn on the Smart Device and respond with OK.
Ask Alexa to turn off SmartHome smart device by saying
“Alexa, turn off SmartHome”.
Alexa will turn off the Smart Device and respond with OK.
Connecting Smart Device to Google Home
Open Google Home App
Choose top left menu from home page of Google Home
Choose Home Control from menu
Push plus sign + at bottom right hand corner
Scroll through list and locate Smart Life
Choose Smart Life
Enter email address and password used in TORK app
Choose Link Now
Choose authorize
Choose done
Test by asking Google “Hey google, turn on everything”
PROGRAMMING INSTRUCTIONS
INSTRUCTIONS DE PROGRAMMATION
INSTRUCCIONES DE PROGRAMACIÓN
ONE YEAR LIMITED WARRANTY: If this product fails because
of a manufacturing defect within one year after purchase, we
will, at our option, either repair or replace it at no charge. Our
warranty does not cover damage caused by accident, abuse
or misuse. We assume no further liability with respect to the
sale or use of this product. THIS WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
THE WARRANTY OF MERCHANTABILITY. We make no warranty
with respect to the fitness of any goods for the users particular
application. This warranty gives you specific legal rights, and
you also may have other rights which vary from state to state.
It is our intent to provide accurate and current specification
information. However, in the interest of product improvement,
TORK may alter the specifications or constructional details
without prior notice.
1. Make sure router is connected to the internet and
working properly
2. Make sure phone or tablet you plan to use for Smart
devices is connected to your Wi-Fi router
3. Download the TORK app on your phone or IPad.
4. Register your TORK app
• Enter country from drop down menu in 1st space
• Type in known email account in 2nd space
- This will be your App username
• Press and release Next
• Type in known password
- This will be your App password
5. Plug Smart device needing connection into outlet
closest to router
• This will help ensure successful setup connection
• You can relocate Smart device at needed location
after setup is successful
6. Push and hold On/Off button on Smart device for 30
seconds to ensure device is reset
• LED light on Smart device will blink rapidly if
reset is successful
7. Press and release Add Device on screen
8. Press and release Electrical Outlet on screen
9. Confirm indicator on Smart device is blinking On/Off
red light rapidly
• If not, push and hold On/Off button on smart
device for 30 seconds to reset
10. Press and release Confirm indicator rapidly blink
on screen
11. Enter router password
• This may already be entered
12. Press and release Confirm on screen
• The Connection Now screen will show your
connection progress
• If setup connection is successful you will see
Successfully Added 1 Device and Smart device will
stop blinking
• If setup is not successful repeats steps 1 thru 4 &
7 thru 12.
13. Press and release “Done” on screen
14. Press and release large Button in middle of screen
to test connection
• Smart device should cycle On & Off
NOTES/ NOTES/ NOTAS:
You must have internet for this device to work outside
the range of the router/ Vous devez avoir un accès Internet pour
faire fonctionner cet appareil hors de la portée du routeur/ Debe
tener Internet para que este dispositivo funcione fuera del alcance
del enrutador
You must have a router for this device to work with your phone app/
Vous devez avoir un routeur pour faire fonctionner cet appareil à
l’aide de votre application mobile/Debe tener un enrutador para que
este dispositivo funcione con su aplicación de teléfono
• See your routers manual if this needs to be changed/Consulter le
manuel d’utilisation de votre routeur si des modifications doivent
être apportées/ Consulte el manual de su enrutador si necesita
cambiarlos
• Make note of your routers final SSID __________________
Noter le nom du réseau sans fil de votre routeur
Anote el SSID final de su enrutador
• Make note of your routers Password __________________
Noter le mot de passe de votre routeur
Anote la contraseña de su enrutador
LI-1124(A)
WFTU40
WI-FI TIME SWITCH
FOR TECHNICAL SUPPORT: SOUTIEN TECHNIQUE : PARA COMUNICARSE CON EL SERVICIO TÉCNICO: [email protected] 888.500.4598 NSi Industries LLC ·•USA •· www.nsiindustries.com
15. Remove and relocate Smart device to desired outlet
location
• Once Smart device is plugged into outlet red light
should blink momentarily
• Smart device red light will stop blinking once
router connection is reestablished
16. Retest connection by pressing and releasing large
button in middle of screen
17. Press and release Back at top left of screen
• You are now located at the control screen
18. Push and release “+” sign located at top right of
control screen
19. Repeat steps 5 thru 17
Connecting Smart Device to (Alexa) Echo Dot
Open Amazon Alexa App
Choose top left menu from home page of Alexa App
Choose Skills from menu
Type in “Smart Life” in search box located at top of
screen and choose search
Choose Smart Life Skill in menu
Choose Enable
Enter email address and password used in TORK app
Choose Link Now
Choose Authorize
Choose done in upper left hand corner
Choose top left menu from home page of Alexa App
Choose smart home from menu
Choose plus sign + above Add Device
• Alexa will discover all devices in set up in TORK
network
• Each smart device will use the TORK network
default name
Testing Alexa (Echo Dot) Voice Commands
From the smart home screen on your Alexa App identify
the name of the smart devices i.e. SmartHome
Ask Alexa to turn on SmartHome smart device by saying
“Alexa, turn on SmartHome”.
Alexa will turn on the Smart Device and respond with OK.
Ask Alexa to turn off SmartHome smart device by saying
“Alexa, turn off SmartHome”.
Alexa will turn off the Smart Device and respond with OK.
Connecting Smart Device to Google Home
Open Google Home App
Choose top left menu from home page of Google Home
Choose Home Control from menu
Push plus sign + at bottom right hand corner
Scroll through list and locate Smart Life
Choose Smart Life
Enter email address and password used in TORK app
Choose Link Now
Choose authorize
Choose done
Test by asking Google “Hey google, turn on everything”
PROGRAMMING INSTRUCTIONS
INSTRUCTIONS DE PROGRAMMATION
INSTRUCCIONES DE PROGRAMACIÓN
ONE YEAR LIMITED WARRANTY: If this product fails because
of a manufacturing defect within one year after purchase, we
will, at our option, either repair or replace it at no charge. Our
warranty does not cover damage caused by accident, abuse
or misuse. We assume no further liability with respect to the
sale or use of this product. THIS WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
THE WARRANTY OF MERCHANTABILITY. We make no warranty
with respect to the fitness of any goods for the users particular
application. This warranty gives you specific legal rights, and
you also may have other rights which vary from state to state.
It is our intent to provide accurate and current specification
information. However, in the interest of product improvement,
TORK may alter the specifications or constructional details
without prior notice.
1. Make sure router is connected to the internet and
working properly
2. Make sure phone or tablet you plan to use for Smart
devices is connected to your Wi-Fi router
3. Download the TORK app on your phone or IPad.
4. Register your TORK app
• Enter country from drop down menu in 1st space
• Type in known email account in 2nd space
- This will be your App username
• Press and release Next
• Type in known password
- This will be your App password
5. Plug Smart device needing connection into outlet
closest to router
• This will help ensure successful setup connection
• You can relocate Smart device at needed location
after setup is successful
6. Push and hold On/Off button on Smart device for 30
seconds to ensure device is reset
• LED light on Smart device will blink rapidly if
reset is successful
7. Press and release Add Device on screen
8. Press and release Electrical Outlet on screen
9. Confirm indicator on Smart device is blinking On/Off
red light rapidly
• If not, push and hold On/Off button on smart
device for 30 seconds to reset
10. Press and release Confirm indicator rapidly blink
on screen
11. Enter router password
• This may already be entered
12. Press and release Confirm on screen
• The Connection Now screen will show your
connection progress
• If setup connection is successful you will see
Successfully Added 1 Device and Smart device will
stop blinking
• If setup is not successful repeats steps 1 thru 4 &
7 thru 12.
13. Press and release “Done” on screen
14. Press and release large Button in middle of screen
to test connection
• Smart device should cycle On & Off
NOTES/ NOTES/ NOTAS:
You must have internet for this device to work outside
the range of the router/ Vous devez avoir un accès Internet pour
faire fonctionner cet appareil hors de la portée du routeur/ Debe
tener Internet para que este dispositivo funcione fuera del alcance
del enrutador
You must have a router for this device to work with your phone app/
Vous devez avoir un routeur pour faire fonctionner cet appareil à
l’aide de votre application mobile/Debe tener un enrutador para que
este dispositivo funcione con su aplicación de teléfono
• See your routers manual if this needs to be changed/Consulter le
manuel d’utilisation de votre routeur si des modifications doivent
être apportées/ Consulte el manual de su enrutador si necesita
cambiarlos
• Make note of your routers final SSID __________________
Noter le nom du réseau sans fil de votre routeur
Anote el SSID final de su enrutador
• Make note of your routers Password __________________
Noter le mot de passe de votre routeur
Anote la contraseña de su enrutador
LI-1124(A)
WFTU40
WI-FI TIME SWITCH
FOR TECHNICAL SUPPORT: SOUTIEN TECHNIQUE : PARA COMUNICARSE CON EL SERVICIO TÉCNICO: [email protected] 888.500.4598 NSi Industries LLC ·•USA •· www.nsiindustries.com
15. Remove and relocate Smart device to desired outlet
location
• Once Smart device is plugged into outlet red light
should blink momentarily
• Smart device red light will stop blinking once
router connection is reestablished
16. Retest connection by pressing and releasing large
button in middle of screen
17. Press and release Back at top left of screen
• You are now located at the control screen
18. Push and release “+” sign located at top right of
control screen
19. Repeat steps 5 thru 17
Connecting Smart Device to (Alexa) Echo Dot
Open Amazon Alexa App
Choose top left menu from home page of Alexa App
Choose Skills from menu
Type in “Smart Life” in search box located at top of
screen and choose search
Choose Smart Life Skill in menu
Choose Enable
Enter email address and password used in TORK app
Choose Link Now
Choose Authorize
Choose done in upper left hand corner
Choose top left menu from home page of Alexa App
Choose smart home from menu
Choose plus sign + above Add Device
• Alexa will discover all devices in set up in TORK
network
• Each smart device will use the TORK network
default name
Testing Alexa (Echo Dot) Voice Commands
From the smart home screen on your Alexa App identify
the name of the smart devices i.e. SmartHome
Ask Alexa to turn on SmartHome smart device by saying
“Alexa, turn on SmartHome”.
Alexa will turn on the Smart Device and respond with OK.
Ask Alexa to turn off SmartHome smart device by saying
“Alexa, turn off SmartHome”.
Alexa will turn off the Smart Device and respond with OK.
Connecting Smart Device to Google Home
Open Google Home App
Choose top left menu from home page of Google Home
Choose Home Control from menu
Push plus sign + at bottom right hand corner
Scroll through list and locate Smart Life
Choose Smart Life
Enter email address and password used in TORK app
Choose Link Now
Choose authorize
Choose done
Test by asking Google “Hey google, turn on everything”
Other manuals for TORK WFTU40
1
Table of contents
Other NSI Timer manuals
