NSP 2000 User manual

2000
Dual Sim
User Manual

1

6.2.4 OUTBOX
6.2.5 SENT MESSAGES
6.2.6 SMS SETTINGS
6.3 MULTIMEDIA
6.3.1 CAMERA
6.3.2 IMAGE VIEWER
6.3.3 VIDEO RECORDER
6.3.4 VIDEO PLAYER
6.3.5 AUDIO PLAYER
6.3.6 AUDIO RECORDER
6.3.7 FM RADIO
6.4 PHONEBOOK
6.5 SETTINGS
6.5.1 PROFILES
6.5.2 PHONE SETTINGS
6.5.3 SECURITY SETTINGS
6.5.4 NETWORK SETTINGS
6.5.5 DUAL SIM SETTINGS
6.5.6 CONNECTIVITY
6.5.7 RESTORE SETTINGS
6.6 TOOLS
6.6.1 TORCH
6.6.2 BLUETOOTH
6.6.3 ALARM
6.6.4 CALCULATOR
6.6.5 CALENDAR
6.7 SOS SETTINGS
7 INPUT
7.1 ABC/Abc/abc
7.2 NUMERIC
8 ACCESSORIES
8.1 SPARE BATTERY
8.2 CHARGER/ CHARGER CABLE
9 MAINTENANCE
9.1 BATTERY NOTICE
9.2 MAINTAIN
2
14
14
14
14
14
14
14
14
15
15
15
15
16
16
17
17
18
18
18
18
18
18
18
19
19
19
19
19
20
20
20
20
20
20
21
21

10 SAFETY
10.1 TRAFFIC SAFETY
10.2 PLANE SAFETY
10.3 HOSPITAL SAFETY
11 ENVIRONMENTAL PROTECTION
3
21
21
22
22
22

1 INTRODUCTION
Thank you very much for choosing our products.
Our mobile phones are up to the standard of communicaons industry of
Asian and European standards, and approved applicable to GSM network.
GSM network is a global cellular communicaons system of internaonal
standards.
This phone can access a variety of internaonal network. It helps you dial
and receive internaonal calls as freely as you're in hometown.
In order to use your mobile phone beer, we recommend that you read this
manual carefully, in order to use the various funcons described in this
manual fully.
Some features may not be allowed to use for different mobile phone
network configuraon and different services provided by the operators,
please contact the seller or network operators for confirmaon.
4

2 SAFETY PRECAUTION
Please read these simple rules and οbey them to avoid danger and prevent
illegal. This manual offer details of safety use.
TRAFIC SAFETY FIRST
▪ Do not use the phone when you're driving. Please park first when it's
necessary.
POWER OFF NEAR GAS STATION
▪ Do not use the phone in a gas staon or near inflammables.
POWER OFF IN A PLANE
▪ Do power off your phone in a plane for it's illegal.
POWER OFF IN A HOSPITAL
▪ Avoid using your phone near medical equipment like pacemakers and
hearing AIDS.
DISTRACTION
▪ All phones may be affected by interference of radio waves and call quality.
FAIR USE
▪ Only use the phone in a proper posion ( near you ear). Do not touch the
top of the phone avoiding cover the built-in antenna. Call quality will be
affected by touch between fingers and antenna shell.
PROFESSIONAL SERVICES
▪ Only professional maintenance person is allowed to assemble and repair
this phone.
CONNECTION
▪ Please read the user manual to get more specific safety guide when
connect with other devices. Do not connect with mismatched devices.
ACCESSORIES
▪ Only use the specified baery and accessories to avoid phone damage.
CHILDREN SAFETY
▪ Please keep the phone out of children's reach.
5

3 KEYBOARD
1.LEFT SOFT KEY, RIGHT SOFT KEY
Perform funcon showed at the le/ right boom of LCD.
LEFT to main menu, RIGHT to contact list under standby interface.
2.DIAL/ PICK KEY
SIM 1/SIM 2 dials or picks a call from SIM 1/SIM 2.
Press this key to check the recent call records understand interface.
3.END/ POWER KEY
End a call.
Long press to power on and off.
Return to stand interface.
4.OK KEY
Confirm.
5.NAVI-KEY
Le/Right: Move cursor le and right when edit.
Up/ Down: Scroll and scan the contact list/ number/ messages and all sub
menus. Move cursor up and down when edit.
6.NUMBER/ LETTER KEY
Dial and input.
7.*
Different funcons under different menus.
Short press inputs under standby interface. Long press opens FM.
Connuous press * input "+" "P" "W" under dial input interface.
8.#
Different funcons under different menus.
Switch input method under text edit interface.
Long press opens and closes VOICE DIAL under standby interface.
Noce:1) Short press means press and release at once; Long press means
keep pressing for over 3 seconds.
2) All funcon menus are for keyboard operang. Please follow the
guidance on the LCD for touch operang.
6

4 PREPARATION
4.1 INSTALL SIM CARD
Please put SIM card out of children's reach.
Any scratch and bend may easily damage the SIM card. Please be careful
when insert, take out and preserve the SIM card.
Please make sure the phone is power off and baery is free before SIM is
taken out.
Take the back cover off and find the SIM card slot. Put SIM card in the slot
right. Please make the metal part of the SIM card down and the edge angle
match the slot shape.
4.2 INSTALL Micro SD CARD
Micro SD card is supported. Please make sure the micro SD card is installed
properly.
Noce: Micro SD card may slip out of the slot by shaking the phone.
Please do not bend or scratch the micro SD card or make it contact with
electrostac, dust and flooding.
Take out the baery and find the micro SD card slot. Release the slot cover
and make the metal part of the micro SD card down. Pay aenon to the
edge angle. Close the slot cover aer micro SD card is totally plugged in the
slot properly.
4.3 INSTALL BATTERY
Open the back cover.
Insert the baery into the baery slot.
Close the phone cover.
4.4 REMOVE BATTERY
Power off the phone first and push down the back cover.
Remove the baery from the baery slot.
·Sengs and data in the SIM card or phone will be lost aer baery
removed.
7

4.5 CHARGE BATTERY
Insert the charger plug in the charging interface, and then connect the
other side to the power socket. If the phone is power on and the stripes at
the top right of the screen keep rolling, the phone is charging. When the
stripe is full of the whole icon and stop scrolling, baery charging is
completed; The charging scroll icon will sll be rolling when the phone is
charging aer power off.
Pull out the plug aer charging is completed.
·When baery is low, the phone will warn you. While capacity is too low,
the phone will automacally power off. Please do not make baery under
low power for a long me because it will damage the quality and durability.
·It is normal that when baery voltage is too low, there will be a pre-
charging process without any charging signs.
·Please use the charger we offered to make sure the phone works
properly.
·Please do not take off the baery during charging.
·Please keep the phone venlate under an appropriate environmental
temperature around 0ºC~+45ºC when it's charging,
4.6 SECURITY PASSWORD
- PIN Code
This is your SIM card personal idenficaon number. PIN and SIM card
usually are provided by the network operator. SIM card will be locked if you
input the wrong PIN number for three mes connuously. You need to
enter the PUK code to unlock. Please contact the network operator for
details.
- PIN2 Code
PIN2 code is provided along with some SIM card. It's normally needed by
some special funcons such as FDN (fixed dialing number) and Valuate
Unit.
PIN2 code will be locked if you input the wrong PIN2 number for three
mes connuously. You need to enter the PUK2 code to unlock. Please
contact the network operator for details.
- PUK Code
PUK Code is provided by the network operator and needed when PIN Code
is locked. If your SIM card is locked, there'll be a sign ask you to input your
PUK code. Your phone will be unlocked aer you input the right PUK code.
Your SIM card may be invalid if you input the wrong PUK code connuously
for 10 mes. Please contact the network operator for details.
8

- PUK2 Code
PUK2 Code is provided by the network operator and needed for unlocking
the PIN2. Your PIN2 code will be locked forever if you input the wrong PUK2
code connuously for 10 mes. There is no influence about other funcons
that not related with PIN2. Please contact the network operator for details.
- Mobile Phone Password
Password prevents your phone from being used without permission.
(Original password is 1122). Please change your password for safety.
5 COMMON FUNCTIONS
5.1 POWER ON
Long press End/ Power key to power on your phone. Background light turns
on and boot animaon flashes.
This phone is dual sim and dual standby with GSM network.
1. There'll be a sign if SIM card is not insert properly or poor contact. Long
press the End/ Power key to power off the phone and reinstall your SIM
card.
2. You need to input your mobile phone password or PIN Code if you enable
them when you install your SIM card and power on.
Network searching is automac and there'll be signs of the network
names and signal strength which depends on SIM card. You can sll use
the emergency call and other funcons not based on network signal when
there's no network service.
5.2 MAKE A CALL
MAKE A DOMESTIC CALL
When network provider logo appears on the screen, you can dial or answer
the phone. The network signal strength is displayed on the top le corner
of the screen. Call quality is affected strongly by obstacles.
Input numbers to make a call under standby interface. Press 'Delete' to
correct wrong number. Press 'LEFT' and 'SAVE to Contacts' can save this
number in SIM1/ SIM2 or phone.
There's an animaon when dialing and status informaon when call is
picked up.
Please follow these steps for a domesc call:
Area Code－Number－Dial Key
9