NTI ENVIROMUX-RKS User manual

Wiring Instruction For:
ENVIROMUX-RKS REMOTE STATION KEYPAD
ENVIROMUX-ACK SERIES DIGITAL KEYPAD
ENVIROMUX-EDR-SF FAIL SAFE STRIKE
ENVIROMUX-EDR-SCR FAIL SECURE STRIKE
The ENVIROMUX devices listed above are intended for connection to an NTI ENVIROMUX-16D/5D/2D or an ENVIROMUX-MINI-LXO
(SYSTEM). For additional instruction on their proper use and operation, see any manuals that came with them and the manual
provided with your SYSTEM.
Wiring instruction for connection to these SYSTEMs can be found below and on the pages that follow.
For the purposes of these illustrations, the “Keypad” can be either the ENVIROMUX-RKS or ENVIROMUX-ACK.
Wiring Connections for ENVIROMUX-16D
E
NVIROMUX®Series

Photo Gallery of an Installation
CAT5 cable- plugged into
sensor port on one end,
connected to Keypad at the
other end.
Two-wire cable to power
electric strike

Jumper wire to provide power for
electric strike.
When output relay 1 closes,
12VDC powers the electric strike.
The black wire of the two-wire
cable connects to ground.
The black wire of the two-
wire cable connects to
ground.
ENVIROMUX-RKS wired to CAT5 patch cable.
Brown and white brown are optional.
Green and white green are not used.
Optional:
Apply brown to 7, and
white brown to 4 if you
want to power the LEDs

ENVIROMUX-ACK wired to CAT5 patch cable.
Green and white green are not used.
The two-wire cable connects to the ENVIROMMUX- EDR-SCR

Wiring Connections for ENVIROMUX-LXO/ ENVIROMUX-2D / ENVIROMUX-5D
The ENVIROMUX-MINI-LXO, ENVIROMUX-2D and ENVIROMUX-5D will also provide sensing and switching functions for the
ENVIROMUX-RKS,ENVIROMUX-ACK, ENVIROMUX-EDR-SF, or ENVIROMUX-EDR-SCR. An example of how these components
can be connected can be seen below. When sold for use with the ENVIROMUX-MINI-LXO, ENVIROMUX-2D or ENVIROMUX-5D,
the model numbers include a “-P” and are shipped with a 12V power supply.

Wiring Connections for other ENVIROMUX Keypads
ENVIROMUX-ACK(R)
ENVIROMUX-ACKR-WDB

ENVIROMUX-ACK-VWS
ENVIROMUX-ACK-VWT

Warranty Information
The warranty period on this product (parts and labor) is two (2) years from the date of purchase. Please contact Network
Technologies Inc at [phone] (800-RGB-TECH) or [phone] or visit our website at http://www.networktechinc.com for
information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.
COPYRIGHT
Copyright © 2011,2017 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without
the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.
CHANGES
The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the right
to make changes in the product design without reservation and without notification to its users.
Man133 Rev 4/11/17