
1. Introduction
zUNV-DVI-CNVTR converts any input of AV / YPbPr / VGA / DVI / HDMI to any output of AV / YPbPr / VGA /
DVI / HDMI.
zUse buttons on the front panel to setup and configure the UNV-DVI-CNVTR.
zWhen no Menu is on the screen, “Enter/Output” button works as Output to select output port, such as AV,
YPbPr, VGA, DVI or HDMI
Note: When the Output button is pressed, wait 3 seconds for a reaction before pressing again.
zDial Switch on the bottom to set output format (1080p, 720p, etc.).
2. Front Panel and User Menu
Item Option
Picture Mode Standard, Dynamic, User, Mild
Color Temperature Medium, Cool, User, Warm
Input Auto, AV, YPbPr, VGA, HDMI
Zoom Out Level 1,
Level 2, Zoom out 2%
Level 3, Zoom out 6%
Level 4, Zoom out 10%
*: Only available when AV output.
Screen Auto Adjust On/Off, Auto Adjust,
Horizontal Position, Vertical Position, Size, Phase
*: Only available when VGA input.
3. Back Panel
MAN281 REV2/28/17
Audio In Video In Video Out Audio Out