NU-LIFT HFJ-700 User manual

Instruction Manual
FORKLIFT JACK
HFJ-700
CAPACITY: 7000kgs
NOTE: Owner / Operator must read and
understand this instruction manual before
using the forklift jack.

1. Use extreme caution when lifting narrow fork lift trucks
(less than 1016mm Wide) from the sides.
2. Never use more than one jack to lift the fork lift truck.
3. Do not use the HFJ-700A to raise all for 4 wheels of the
fork lift from the floor. Two wheels of the lift truck must
remain in contact with the floor at all times.
4. Do not push the jack under the fork lift beyond the red line
marked on the decal on the top of the lift arm.
5. Do not use any kind of “cribbing” under the HFJ-700A, or
on top of the lift pad area.
6. Keep hands, feet and all other body parts out of the area
of the scissors mechanism at all times.
7. Do not drop, throw, drive over or otherwise abuse the HFJ-
700A.
8. Do not drive the lift truck off the jack or attempt to move
the fork lift at any time when it is supported by the HFJ-
700A.
9. Do not work on the fork lift, or get under it for any reason
until it is properly supported by means of adequate stands.
10. The HFJ-700A jack is designed solely for the lifting of fork
lift trucks.
11. Do not modify the HFJ-700A jack by yourself.
12. Do not exceed the rated capacity of the HFJ-700A, which
is 7000kg.
2
WARNING

SPECIFICATIONS
Rated capacity 7000kg/15400lbs
Starting pad
height (notch) 65mm/2-1/2inches
Max.raised height 420mm/16-1/2inches
Width 250mm/9-4/5inches
Weight 48kg/105.6lbs
3

NO DESCRIPTION QTY NO DESCRIPTION QTY
01 Grip 1 36 Screw 1
02 Handle 1 1 37 Seal Ring 1
03 Screw 2 38 Spring 1
04 Handle 2 1 39 Magnet Steel 1
05 Handle Base 1 40 Valve Block 1
06 Chain 1 41 O-Ring 2
07 Chain Hook 1 42 Back-Up Ring 1
08 O-Ring 2 43 Ball 1
09 Retaining Ring 10 44 Ball Seat 1
10 Pin 3 45 Spring 1
11 Screw 2 46 Screw 1
12 Seal Ring 2 47N Piston Rod Pad 1
13 Oil Tank 1 48 Pin 1
17 O-Ring 2 49 Saddle 1
18 Port Ring 1 50 Pin 1
19 Cylinder 1 51 Spacer 2
20 Piston Rod 1 52 Screw 2
21 Piston 1 53 Lock Washer 2
22 Valve Seat 1 54 Nut 2
23 Ball 3 55 Snap Ring 2
24 O-Ring 1 56 Washer 2
25 Release Rod 1 57 Wheel 2
26 Release Knob 1 58 Frame 2 1
27 Pin 1 59 Screw 2
28 Link Rod 1 60 Lock Washer 4
29 Pin 1 61 Washer 2
30 Plunger 1 62 Axle 1
31 Wiper 1 63 Screw 2
32 Back-Up Ring 1 64 Trunnion 2
33 O-Ring 1 65 Frame 1 1
34 Pump 1 66 Snap Ring 1
35 Seal Ring 1 67 Screw 1
4

5

47N
6