Numark S-K-140-1N/3 User manual

Bright & Fun 3 piece bistro set
ASSEMBLY INSTRUCTIONS
S-K-140-1N/3&S-K-140-1N/3B
Questions, problems, missing parts with this product? Do not return to your
retailer, please call our customer service department 9:00 a.m. to 5:00 p.m.
Eastern Standard Time Monday through Friday Phone # [phone]
or contact us at www.numarkcustomerservice.com
1
Care and Maintenance
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with exposure to the elements. In case of rust or scratches,
lightly sand the affected area and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
Wash frames with a mild solution of soap and water; rinse thoroughly. Do not use bleach or solvents.
Do not store anything on tabletop. Use furniture covers or store indoors during cold or inclement weather.

Parts
A1
A2
B
C
D
E
F
left arm
right arm
seat
back
table top
leg
center ring
2
2
2
2
1
3
1
Hardware
Gc x 6
Short bolt
Gb x 8+1spare
Long sunk screw
Gd x 3
Long bolt
Ge x 18
Metal washer
Allen wrench
Gg x 1 Gi x 1
Assembly instruction
Do not tighten completely.
Repeat procedure for the other side.
2
assembly instructions sheet
D
E
F
Ga x 12 +1spare
Short sunk screw
Gf x 9
Nut
Hex wrench
Gh x 1
A2
A1
B
Ga
A2
B
Ga
A2
B
Ga x 6
Short sunk screw
A1
A2
B
C
1

3
Do not tighten completely.
Repeat procedure for the other holes.
Assembly instruction
C
A2
A1
Gb
A2
C
Gb x 4
Long sunk screw
Securely tighten all bolts and screws.
Repeat procedure for the other chair.
2
3

Assembly instruction
Do not tighten completely.
Repeat procedure for the other two legs.
4
Gd x 3
Long bolt
Ge x 6
Metal washer
Gf x 3
Nut
E
Ge x 12
Metal washer
Gf x 6
Nut
Gc x 6
Short bolt
Turn over the side table, securely tighten all bolts and nuts by using Hex wrench (Gh)
and Allen wrench(Gg).
Now your bistro set is ready for use!
Printed in china
Do not tighten completely.
Repeat procedure for the other three legs.
4
5
6
Ge Gd
D
Ge
Gf
E
E
D
E
F
F
Ge Ge
Gc
Gf