Numatic TWINTEC BATTERY ETB4045 Installation and operation manual

2.
4.
6.
1.
3.
5.
Clean out the debris lter basket
located under the seperator hood.
Empty the recovery tank and rinse
thoroughly with clean water.
Clean suction pod lter located in the
seperator hood behind the black ap.
Ensure the seperator seal is clean and
undamaged. Replace if necessary.
Plug the machine in for charging.
IMPORTANT: Clean underside of
squegee from dirt and debris.
NETB4045DMVNo1
REPORT ALL DAMAGES AND TECHNICAL ISSUES TO THE SUPERVISOR
AFTER EVERY DAY, ENSURE
THAT YOU COMPLETE THE
FOLLOWING 6 STEPS
NUMATIC TWINTEC BATTERY
ETB4045
DAILY MAINTENANCE CHART

AFTER EVERY WEEK, ENSURE
THAT YOU COMPLETE THE
FOLLOWING 4 STEPS
1.
3.
2.
4.
Check all hoses for damage, holes and
obstructions. Clean and replace as necessary.
Thoroughly clean top seperator hood and
seal.
IMPORTANT: Remove squegee and check for
wear and damage. Clean thoroughly. Remove brushes/pad drives and
check for wear and damage.
NETB4045WMVNo1
REPORT ALL DAMAGES AND TECHNICAL ISSUES TO THE SUPERVISOR
NUMATIC TWINTEC BATTERY
ETB4045
WEEKLY MAINTENANCE CHART
2
3
4
1