Numatic TTB 4055 User manual

2.
4.
6.
1.
3.
5.
Clean out the debris lter basket
located under the seperator hood.
Empty the recovery tank and rinse
thoroughly with clean water.
Clean suction pod lter in the
seperator hood behind the black ap.
Ensure the seperator seal is clean and
undamaged. Replace if necessary.
Plug the battery in for charging.
IMPORTANT: Remove to clean under-
side of squegee from dirt and debris.
NTTB4055DMVNo1
REPORT ALL DAMAGES AND TECHNICAL ISSUES TO THE SUPERVISOR
AFTER EVERY DAY, ENSURE
THAT YOU COMPLETE THE
FOLLOWING 6 STEPS
NUMATIC TWINTEC BATTERY
TTB4055
DAILY MAINTENANCE CHART

AFTER EVERY WEEK, ENSURE
THAT YOU COMPLETE THE
FOLLOWING 4 STEPS
1.
3.
2.
4.
Check all hoses for damage, holes and
obstructions.
Thoroughly clean top seperator hood and
seal.
Remove squegee and check for wear and
damage. Clean thoroughly. Remove brushes/pad drives and
check for wear and damage.
NTTB4055WMVNo1
REPORT ALL DAMAGES AND TECHNICAL ISSUES TO THE SUPERVISOR
NUMATIC TWINTEC BATTERY
TTB4055
WEEKLY MAINTENANCE CHART
2
3
4
1