NuTone ARP6 User manual

90˚
HJ0030 HJ0031 1/2”
ALL MODELS: First, fold the side
tabs.
NOTE: Drill two 1/8” diameter holes (for the screws) at 1/2” from the adapter top edge. Both holes
must be perpendicular with the damper opening axis. To avoid interference with the
dampers, lift them up and insert the screws in a way that dampers are above the screws.
A
B
C
HJ0032
A
C
B
INSTALLATION
INSTRUCTIONS
1) Mount the airflow reducer (A)
over the hood adapter (B) with
screws (C) included, as the
illustration above. Refer to the
table on the back of this sheet for
the installation type according to
the hood model.
2) Check the box corresponding
to the hood brand on the sticker
included. Affix it near the HVI
certification sticker located inside
the hood.
3) Keep the airflow reducer
installation instructions with the
hood instalation manual.
NOTE: Once installed, this reducer
will limit the airflow of the range
hood under 300 CFM.
ARP6 AIRFLOW REDUCER
INSTALLATION INSTRUCTIONS
(6" ROUND)

SERIES ACTUAL CFM
PI3/MIN ACTUEL
PI3/MIN ACTUAL
MAXIMUM CFM WITH REDUCER INSTALLATION
61000 450 280 II
B59000 450 231 II
BDF/NTM 500 170 II
E12000 500 270 I
E54000 480 280 I
E55000 360 260 I
EI59000 500 270 II
EW58000 500 270 II
IS170 450 275 II
IS23 500 290 II
IS241 500 290 II
IS502 450 280 II
K15 500 290 II
K273 500 290 II
K29 500 290 II
K30 500 290 II
K3139 400 280 I
K34 500 290 II
K3500 450 280 I
K41 500 290 II
K7388 450 280 I
K7788 440 275 I
K8087 450 280 I
P1951M 400 260 II
P195P1M 520 282 II
PM390 390 260 I
PM500 500 290 I
RM51000 370 260 I
RM52000 370 260 I
RM53000 370 260 I
RM65000 450 275 II
RMPI 500 290 I
VJ504/VJ603/VJ604
VJ705/VJ706 450 280 II
VJ703 370 220 II
VJ704 450 230 II
WC231 410 270 II
WC261 480 285 I
VCS500 500 290 II
VCS550 550 295 II
ARP6 AIRFLOW REDUCER
INSTALLATION INSTRUCTIONS
(6" ROUND)
When it comes to quality home appliances, Broan-NuTone is the brand you can depend on.