NUTRIBULLET COMBO User manual

User guide
®
BLENDER
COMBO

2
GENERAL SAFETY
INFORMATION
• This appliance shall not
be used by children.
Keep the appliance and
its cord out of reach of
children.
• Children shall not play
with the appliance.
• Appliances can be used
by persons with reduced
physical, sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision
or instruction
concerning use of the
appliance in a safe way
and if they understand
the hazards involved.
• Do not use outdoors.
 NEVER LEAVE
THE nutribullet®
UNATTENDED WHILE IT
IS IN USE
Important safeguards
Warning! To avoid the risk of serious injury, carefully read all
instructions before operating your nutribullet®.When using any
electrical appliance, basic safety precautions should always be
observed, including the following important information.
Save these instructions!
FOR HOUSEHOLD USE ONLY
 ALWAYS TURN THE
nutribullet®OFF WHEN
NOT IN USE
 DO NOT USE THIS
APPLIANCE FOR
ANYTHING BUT ITS
INTENDED USE
MISUSE MAY RESULT IN
PERSONAL INJURY
HEAT & PRESSURE
SAFETY
•Always use extreme
care and attention when
using hot ingredients in
any blending product,
as the friction from the
rotating blades (during
the blending process)
combined with the thermal
energy of the heated
ingredients can create a
dangerous situation if not
properly controlled.
!

3
•Caution must be observed
if hot liquid is poured
into the blender as it can
be ejected out of the
appliance due to sudden
steaming.
BLENDING WITH
nutribullet
®
CUPS:
To avoid personal
injury, never blend hot
ingredients or liquid in
any sealed nutribullet®
cup!
Heated ingredients
can pressurize sealed
containers when
agitated and cause cup
and blade separation
or violently expel hot
contents upon opening.
Always start the
blending process with
room temperature or
refrigerated ingredients
and liquids (21°C/70°F or
cooler).
Never continuously
operate for longer
than necessary to
create your recipe —
generally less than one
minute. Friction from
prolonged operation
can heat ingredients
and generate internal
pressure in the sealed
container. This pressure
can cause the cup and
blade to separate or
blended contents to
erupt from the container,
resulting in possible
personal injury and/or
property damage. If the
sealed nutribullet®cups
are warm to the touch,
power o your machine
and allow the vessel to
cool for fifteen minutes
or more. Allow contents
to settle before slowly
releasing the cup from
the motor base. With the
nutribullet®cup, pointed
away from your face and
body, slowly unscrew
the easy-twist extractor
blade
to gently release any
residual pressure.
If you need to blend for
longer than one minute,
blend for 1-minute
intervals. After each
1-minute interval, allow
the motor base to shut o
completely and wait at
least one minute before
starting the next cycle.
Do not run for more than
3 consecutive 1-minute
intervals to prevent the
contents from overheating.
Allow contents to settle for
2-3 minutes after the third
blending cycle to prevent
WARNING!
WARNING!

4
overheating and buildup
of pressure.
Sugar in fruits and
vegetables can ferment
over time, releasing
gases that cause
pressure to build up in
a sealed nutribullet®
cup. Do not store
any smoothies or
blended mixtures in
vessels sealed with the
easy-twist extractor
blade. If you will not
consume your smoothie
immediately, remove
the easy-twist extractor
blade and cover your
nutribullet®cup with
plastic wrap before
refrigerating. If your
smoothie or blended
mixture was made in
the pitcher, transfer
to another storage
container before
refrigerating. Never
store any blended
mixture in a sealed cup
unrefrigerated, or for
any prolonged period of
time; contents will spoil
and ferment, producing
gases that might cause
eruption.
Never blend carbonated
liquids or eervescing
ingredients (e.g., baking
soda, baking powder,
yeast, etc.). Pressure
from released gases can
cause a sealed blending
container to burst,
resulting in possible
injury and/or property
damage.
BLENDING WITH THE
PITCHER:
Use extra caution when
blending hot liquids in the
pitcher.
Never turn the power on
while using the pitcher
without the vented lid cap
inserted and locked into the
pitcher lid, as ingredients
can splash, and if hot or
warm, could potentially
cause thermal injury and/or
property damage.
Steam and splattering
ingredients can escape
through the pitcher lid,
potentially scalding and/
or burning the user.
NEVER blend hot liquids
in your pitcher without
the pitcher lid and
vented lid cap locked
and attached.The vented
lid cap allows steam
and pressure to escape,
while guarding against
excess splashing. NEVER
blend hot liquids in your
nutribullet®cups or any
other sealed vessel.
WARNING!
WARNING! WARNING!

5
When blending hot
liquids, add liquid
and solid ingredients
to your pitcher below
their respective MAX
lines. Attach the pitcher
lid with the vented
lid cap inserted and
locked. Press POWER
and begin blending
on the LOW setting.
Once ingredients are
integrated, increase
speed as needed.
If the nutribullet®blends
for longer than one
minute, friction from
the blades can cause
ingredients to heat
and generate internal
pressure inside the
vessel. If a blending
vessel becomes warm
to the touch, turn o the
machine and allow the
vessel to cool completely
before carefully opening,
pointed away from your
body to avoid injury.
BLADE SAFETY
Never store any
easy-twist extractor
blade in the motor
base unattached to
a nutribullet®cup. An
exposed blade can
present a laceration
hazard.
Blades are sharp!
Handle carefully. Use
care when handling
any blade. To avoid
laceration injury, do not
handle or touch any
blade edge.
AVOID CONTACT WITH
MOVING PARTS! Keep
hands and utensils
out of and away from
blades while blending
food to reduce the risk of
severe personal injury.
• TO REDUCE THE RISK OF
PERSONAL INJURY OR
PROPERTY DAMAGE,
never place the easy-
twist extractor blade
on the motor base
without the cup properly
attached. Make sure
the easy-twist extractor
blade is securely twisted
(hand-tightened) onto
the nutribullet®cup
before placing it on
the motor base and
operating the nutribullet®
Blender Combo. Check
to make sure the easy-
twist extractor blade is
aligned properly before
placing it on the motor
base and operating
your nutribullet®Blender
Combo.
WARNING!
WARNING!

6
• After blending, turn the
power button o. Wait to
remove the nutribullet®
cup/easy-twist extractor
blade assembly from the
motor base until the motor
comes to a full stop and
the unit powers down
completely. Taking the
blending vessel o the unit
prior to complete power
down can cause damage
to the easy-twist extractor
blade coupling or motor
gear.
Never use the
nutribullet®Blender
Combo without adding
liquid, as doing so may
damage the blades.
• The cyclonic action®of
your nutribullet®Blender
Combo requires the
use of liquids to make
smoothies and other
nutritious items. The
nutribullet®Blender
Combo is not intended to
be used without liquids,
or as an ice crusher.
ALWAYS ADD LIQUID to
your recipe.
• DO NOT USE the easy-
twist extractor blade for
grinding dry ingredients
such as grains, cereal,
or coee, as this may
damage the motor and/
or the easy-twist extractor
blade.
• We recommend replacing
your easy-twist extractor
blade every 6 months
(depending
on use) or as needed for
optimal performance.
PITCHER SAFETY
• Always operate the pitcher
with the pitcher lid securely
in place.
• With recipes that require
certain ingredients to
be incorporated during
blending, first add the
base ingredients, seal the
pitcher lid with vented
lid cap attached, and
begin blending. Then,
once the ingredients are
well mixed, twist open
the vented lid cap and
carefully pour or drop
ingredients into the
mixture.
• If you need to push
ingredients closer to the
blade, ONLY USE THE
TAMPER PROVIDED with
the nutribullet®Blender
Combo. DO NOT use
any apparatus other
than the tamper to push
ingredients toward the
blade. The tamper is
specifically designed

7
not to come in contact
with the blade. Spatulas,
spoons and other tools
can make contact with the
blade, which may result in
damage to the machine,
damage to property, and/
or possible injury.
• NEVER USE YOUR
FINGERS OR ANY PART
OF YOUR HAND TO
PUSH INGREDIENTS
DOWN TOWARD THE
BLADE. Only use the
provided tamper.
Remember to use extra
caution when blending hot
liquids or ingredients in the
pitcher.
• Spray or escaping steam
may cause burns and/or
property damage.
• Do not fill container
above the maximum
capacity lines indicated
for liquids and solid
ingredients.
• Always begin blending hot
ingredients on the LOW
setting.
• Keep hands and other
exposed skin away from lid
opening to prevent possible
burns.
ELECTRICAL SAFETY
Do not use this product
in locations with dierent
electrical specifications
or plug types. Do not
operate with any type of
plug adapter or voltage
converter device, as these
may cause electrical
shorting, fire, electric
shock, personal injury, or
product damage.
• CAUTION: In order to
avoid a hazard due to
inadvertent resetting
of the thermal cut-out,
this appliance must not
be supplied through
an external switching
device, such as a timer, or
connected to a circuit that
is regularly switched on
and o by the utility.
• If the supply cord is
damaged, it must
be replaced by the
manufacturer, its service
agent or similarly
qualified persons in order
to avoid a hazard.
• The use of attachments,
including canning jars, is
not recommended and
may cause fire, electric
shock, personal injury,
or product damage and
will void the product’s
warranty.
• To avoid the risk of
electric shock, never
WARNING!

8
immerse the cord, plug,
or motor base of the
nutribullet® Blender
Combo in water or other
liquids. Discontinue
use if the cord, plug, or
motor base is damaged.
• Always disconnect the
appliance from the
power supply if it is
left unattended and
before assembling,
disassembling or
cleaning. Do not attempt
to handle the nutribullet®
Blender Combo until
all parts have stopped
moving.
• Do not allow the cord to
hang over the edge of
the table or counter. Do
not pull, twist, or damage
the power cord. Do not
allow the cord to touch
hot surfaces, including
the stove.
• If the motor stops
working, unplug the
motor base and let it cool
for at least 15 minutes
before attempting to use
it again. Your nutribullet®
has an internal thermal
breaker that shuts o the
motor when it overheats.
The thermal breaker
will reset when the unit
is unplugged, and the
thermal breaker cools
down suciently.
STOVETOP
HEATING SAFETY
Do not blend hot
ingredients in any
sealed nutribullet®cup!
To heat items that
have been blended at
room temperature or
cooler (21°C/70°F or
less), transfer mixture
to a stovetop pot to
heat. Always use a
thermometer to test the
internal temperature
of cooked ingredients;
they may feel cool to
the touch, yet still be hot
inside.
The nutribullet®Blender
Combo is not intended
for use on the stove top.
Do not place the motor
base or any nutribullet®
accessory on the stove or
microwave or immerse in
boiling water.
This may result in
damage to the accessory.
VENTILATION
WARNINGS
To prevent a fire hazard,
power base openings
(underneath the motor
base) should be free

9
of dust and lint and
never obstructed with
flammable materials
such as newspapers,
tablecloths, napkins,
dishtowels, place mats
or other similar type
materials.
• CAUTION! Always operate
the nutribullet®Blender
Combo on a level surface,
leaving unobstructed
space beneath and
around the motor base
to permit proper air
circulation. Vents on the
bottom of the product are
provided for ventilation
to ensure reliable motor
operation and to prevent
overheating.
MEDICAL SAFETY
• The information
contained in this User
Guide or Recipe Guide is
not meant to replace the
advice of your physician.
Always consult your
physician regarding
health and nutrition
concerns.
MEDICATION
INTERACTIONS:
• If you are taking any
medication, especially
cholesterol-lowering
medication, blood
thinners, blood pressure
drugs, tranquilizers, or
antidepressants, please
check with your physician
before trying any of the
recipes contained in this
guide or the recipe guide.
• Avoid blending the
following seeds and pits
in the nutribullet®Blender
Combo, as they contain
a chemical known to
release cyanide into the
body when ingested:
apple seeds, cherry pits,
plum pits, peach pits, and
apricot pits. Fruit pits may
also cause damage to the
pitcher.
ADDITIONAL
INSTRUCTIONS FOR
PROPER USAGE
• Do not place any of the
nutribullet®Blender
Combo parts in a
microwave, oven, or in a
stovetop pot, or immerse
in boiling water, as this
may result in damage to
the part.
• TO AVOID LEAKAGE, DO
NOT OVERFILL THE
BLENDING VESSELS! The
pitcher is marked with
two MAX lines: one for
solid ingredients (higher
line) and one for liquid
ingredients (lower line).
Your nutribullet®cups
WARNING!

are also marked with a
MAX line. When filling the
blending vessels, make
sure your ingredients
do not exceed their
respective MAX lines.
Exceeding the indicated
MAX lines can result in
leakage, and may lead to
dangerous pressurization.
• Blending vessels and
easy-twist extractor
blades are specific
to the exact model of
nutribullet®Blender
Combo you possess. Use
of incompatible parts
(parts from other models)
may result in damage to
your nutribullet®Blender
Combo or create safety
hazards. When ordering
replacement parts
(nutribullet®cups, pitcher,
easy-twist extractor
blades) on nutribullet.
com or via customer
service, please specify the
machine model to ensure
you receive parts that are
compatible with your unit.
• Periodically inspect all
nutribullet®Blender
Combo components for
damage or wear that may
impair proper function
or present an electrical
hazard. Make sure that
the power cord and
plug are undamaged.
Discontinue use and
replace blending vessels
if you detect cracking,
cloudiness, or damage
to the plastic. Ensure that
the blades rotate freely
and that the structure is
undamaged. Make sure
that the motor base is
unobstructed and clean.
Follow maintenance
recommended in the
User Guide and never
operate your nutribullet®
Blender Combo with
damaged components. If
your nutribullet®Blender
Combo malfunctions in
any way, immediately
discontinue use and
contact customer service.
You may purchase new
nutribullet®cups, pitchers,
and easy-twist extractor
blades at nutribullet.
com or by contacting
customer service.
Save these
instructions!
If you have any comments,
questions, or concerns,
please go to nutribullet.
com.
!

11

12
Contents
13 What’s included
14 Assembly guide
15 Getting started
15 Safety guide
16 Pitcher assembly & use
19 nutribullet®cup assembly & use
21 Blending control panel
22 How to use the blending control panel
23 Care & maintenance
23 How to clean the nutribullet®
25 How to store
25 Replacement parts
Thank you for purchasing the nutribullet®
Blender Combo.

13
What’s included
1 900 ml
cup
1 pitcher with
integrated blade
1 motor base
1 pitcher lid
with vented
lid cap
1 tamper
1 700 ml
handled cup 2 to-go lids
1 easy-twist
extractor blade

14
Assembly guide
nutribullet®
cup
vented lid cap
pitcher lid
pitcher
easy-pour spout
tamper
integrated blade
blender control
panel
motor base
suction cup feet
easy-twist
extractor blade

Use extra caution when
blending hot liquids in the
pitcher.
Steam and splatters can escape
through the vented lid, potentially
causing scalding and/or burns.
NEVER blend hot liquids in your
pitcher without the pitcher lid
and vented lid cap attached. The
vented lid cap is ventilated to allow
steam and pressure to release,
while guarding against excess
splashing. NEVER blend hot liquids
in your Nutribullet cups or any
other sealed vessel.
When blending hot liquids, add
liquid and solid ingredients to your
pitcher below their respective MAX
lines. Attach the pitcher lid with the
vented lid cap inserted. Press the
POWER icon, then begin blending on
the LOW setting. Once ingredients
are integrated and the mixture is
level (no splashing), increase speed
as needed.
PLEASE KEEP
THESE IMPORTANT
SAFEGUARDS IN
MIND WHEN USING
THE APPLIANCE:
• Make sure the base is plugged in
for use.
•DO NOT attempt to operate the pitcher
on the appliance without attaching
the pitcher lid and vented lid cap.
• Never run the appliance while empty.
• Appliance accessories are not
intended to be used in the microwave
as it may damage the accessories.
• Never leave the appliance
unattended while in use.
Never blend hot liquids
when using any sealed
nutribullet®cups.
Heated ingredients can pressurize
sealed containers when agitated
and violently expel hot contents upon
opening. Always start the blending
process with room temperature or
refrigerated ingredients and liquids
(21°C/70°F or cooler).
WARNING!
WARNING!
Getting started
15

16
3
Pitcher assembly
& use
Place the pitcher onto the
motor base — handle facing
to the right of the blending
control panel, never towards
the back — and gently twist
clockwise so it locks in place.
When you hear the click, it’s
locked and ready to blend.
NOTE: If you are left-handed, place
the handle facing towards the center
of the blending control panel and
twist clockwise.
5
3Place the pitcher on a
clean, dry, level surface.
Add the ingredients to the
pitcher, making sure they do
not exceed the MAX line.
1Review all warning and
caution statements in the
Important Safeguards
section (pg 2-10) and
on the previous page before
proceeding to Step 2.
Place the motor base on
a clean, dry, level surface
such as a counter or table.
4Place the pitcher lid with
vented lid cap attached on
the pitcher, making sure it’s
aligned to the handle.
NOTE: The blending pitcher is
marked with two MAX lines:
one for solid ingredients
(higher line) and one for
liquids (lower line). When filling
the blender, make sure your
ingredients do not exceed their
respective MAX lines.
2

17
6
Plug the power cord into
an electrical outlet and
press POWER to turn on
the blender.
7
To start blending, select
a speed or the EXTRACT
program on the blending
control panel. This program
will turn o automatically.
Buttons will illuminate while
in use.
NOTE: Proceed to the blending
control panel chart on page 21
for speed definitions.
CAUTION: Do not use any
apparatus other than the
tamper to push ingredients
toward the blade. The tamper
is specifically designed not to
come in contact with the blade.
Spatulas, spoons and other
tools are long enough to reach
the blade, which may result
in damage to the machine,
damage to property, and
possible injury.
NOTE: If you need to add
additional ingredients while
blending, switch the setting to
LOW and remove the vented
lid cap from your pitcher lid,
leaving the lid attached. Add
ingredients through the hole
in the top of the lid, followed
by the tamper if necessary.
Replace the vented lid cap, then
increase to your desired speed.
DO NOT attempt to add items
through the vent hole when
blending hot ingredients.

18
Twist pitcher counterclockwise
and lift o the motor base.
Pour and enjoy!
Press POWER to turn o
the unit completely.
If the ingredients stick to
the side of the pitcher, stop
the appliance by pressing
POWER and wait for
the blade to stop turning.
Then remove the pitcher
lid and use the tamper to
dislodge the ingredients.
When finished, replace the
lid and continue blending.
if the ingredients continue
to stick, consider adding a
little more liquid.
When you have reached
your desired consistency,
pause/stop the appliance
by pressing POWER or the
speed you selected and wait
for the blades to stop turning.
The unit will enter idle-mode.
The POWER button will
remain illuminated.
WARNING: Blades are sharp. Never
insert your hands into the pitcher.
8
9
11
10

19
Handle the easy-twist extractor
blade assembly with care, as
the blades are sharp.
Never leave the appliance
unattended while in use.
NEVER BLEND HOT LIQUIDS,
as doing so may cause
excessive pressure buildup,
resulting in risk of personal
injury and or property damage.
nutribullet®cup
assembly & use
WARNING!
Plug the power cord into
an electrical outlet and
press POWER to turn on
the blender.
5
Add ingredients to
the nutribullet®cup.
NOTE: Do not overfill! To avoid
leakage, do not add ingredients
beyond the MAX line.
3
4
Twist the easy-twist
extractor blade onto the
cup until tightly sealed.
1Review all warning and
caution statements in the
Important Safeguards
section (pg 2-10)
before proceeding to Step 2.
2Place the motor base on
a clean, dry, level surface
such as a counter or table.
6
Turn the cup upside down
and place it onto the motor
base, gently turning the
cup clockwise to lock into
the motor base.

7
8
10
To start blending, select
a speed or the EXTRACT
program on the blending
control panel. This program
will turn o automatically.
Buttons will illuminate while
in use.
NOTE: Proceed to the blending
control panel chart on page 21
for speed definitions.
When you have reached
your desired consistency,
pause/stop the appliance
by pressing POWER or the
speed you selected and wait
for the blades to stop turning.
The unit will enter idle-mode.
The POWER button will
remain illuminated.
NOTE: speeds will automatically
shut o after 60 seconds.
Unlock the assembly by
gently twisting the cup
counterclockwise. You will
hear a click. Enjoy!
NOTE: Blending should never take
longer than one minute to yield
smooth and creamy results.
Press POWER to turn o
the unit completely.
9
CAUTION
Do not remove the easy-twist
extractor blade from the
nutribullet®cup until blending has
completely ceased. Do not use
the easy-twist extractor blade
as a storage lid for your cup.
Some foods may contain active
ingredients or release gases that
will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose
a risk of injury. When storing
contents in the cup, use plastic
wrap or foil to seal your container.
Always point contents away from
your body when unsealing.
20