3USINGYOURAPPLIANCE
The Tower VitaBlend Pro is ideal for healthy
eating on the go. A simple one touch operation,
it’s fast and simple to make a lling 800ml
smoothie, that gets blended straight into the
bottle you drink it out of.
If you want a ligther smoothie, the 500ml
capacity sports bottle is perfect for you.
Choose your own ingredients and blend to your
perfect consistency for a smoothie catering
exactly to your taste.
Using the Tower VitaBlend Pro you can also
chop, grate, grind, puree and more. Simply add
your ingredients to the sports bottle and attach
to the blender. Push down for the blades to work
and remove when done.
Assembling/OperatingYourBlender
1. Place the sports bottle on a at surface with
the open end facing up.Fill the bottle with
your ingredients. Wash fruit / vegetables
rst and slice into small pieces –
about 2 x 2 cm. Ensure you do not ll the
bottle past the MAX ll line.
Note: The Product is NOT suitable for blending
any hot liquids. The blender can be used to
blend soup, however it would need to be heated
up after blending. If blending soup, ensure that
the ingredients are cooled before putting into the
VitaBlend Pro.
1. Fasten the blade assembly on the open end
of the sports bottle. Twist clockwise to t
in place.
2. Turn the sports bottle upside down.
3. Fasten the bottle into the blender base
by aligning the three safety tabs on the
sports bottle with the three recesses in the
blender base. The sports bottle will then be
locked in place.
4. Push the sports bottle down to blend.
5. Allow the blender to cool for 3 minutes after
every 1 minutes of continuous usage.
6. Unplug the appliance once you have
blended to your preferred consistency.
7. Twist the sports bottle and pull up to
remove.
8. Turn the sports bottle over and place on a
at surface.
9. Unscrew the blade assembly by twisting
it anti-clockwise. Once it is loose, remove
the blade assembly and put in a safe place,
being cautious of the sharp blades.
10. Replace the blade assembly with the
drinking lid.
11. Your drink is now ready.
PulseBlending
To use the pulse function simply push down for
30 seconds and release until desired consistency
has been achieved. After 2 x 30 second cycles
we recommend that the user allows the product
to cool for 3 minutes.
ContinuousBlending
For prolonged blending the sports bottle can be
twisted clockwise into its locked position, this
will now blend until the sports bottle has been
released to its original unlocked position.
After blending is complete remove the sports
bottle from the base unit. Turn the sports bottle
back upright and remove blade assembly.
The user can now attach the storage lid and
refrigerate or attach the drinking lid for drinking
on the go.