NUTRIBULLET NUTRIBULLET User manual

User guide.
®
NutriBullet | NutriBullet PRO
UserGuide_600-900_v10.indd 1 9/4/19 12:32 PM

2
GENERAL SAFETY
INFORMATION
• Close supervision is necessary
when any appliance is used
by or near children. Keep cord
out of reach of children.
 NEVER LEAVE THE
NUTRIBULLET® UNATTENDED
WHILE IT IS IN USE
 DO NOT USE OUTDOORS
 ALWAYS UNPLUG THE
NUTRIBULLET®WHEN NOT IN
USE
HEAT & PRESSURE
SAFETY
To avoid personal injury,
never blend hot or
carbonated ingredients
in any sealed
NutriBullet®cup!
Important safeguards.
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE OBSERVED, INCLUDING THE
FOLLOWING:
Warning! To avoid the risk of serious injury, carefully read all
instructions before operating your NutriBullet®. When using any
electrical appliance, basic safety precautions should always be
observed, including the following important information.
Save these instructions!
FOR HOUSEHOLD USE ONLY
Heated ingredients
can pressurize sealed
containers when agitated
and violently expel hot
contents upon opening.
Always start the blending
process with room
temperature or refrigerated
ingredients and liquids
(21°C/70°F or cooler).
Never continuously operate
for longer than necessary
to create your recipe —
generally less than one
minute.
Never blend carbonated
liquids or eervescing
ingredients (e.g., baking
soda, baking powder,
yeast, etc.). Pressure from
released gases can cause
a sealed NutriBullet®cup to
burst, resulting in possible
injury and/or property
damage. Blade friction
from prolonged operation
!
WARNING!
UserGuide_600-900_v10.indd 2 9/4/19 12:32 PM

3
can heat ingredients and
generate internal pressure
in the sealed container. This
pressure can cause the cup
and blade to separate or
blended contents to erupt
from the container, resulting
in possible personal injury
and/or property damage.
If the sealed NutriBullet®
cups are warm to the touch,
power o your machine
and allow the vessel to cool
for fifteen minutes or more.
Allow contents to settle
before slowly releasing
the cup from the motor
base. With the NutriBullet®
cup, pointed away from
your face and body, slowly
unscrew the extractor
blade to gently release any
residual pressure.
FRICTION FROM THE ROTATING
EXTRACTOR BLADES WHEN
BLENDING CAN CAUSE
INGREDIENTS TO HEAT
AND GENERATE INTERNAL
PRESSURE IN THE SEALED CUP,
IF PERMITTED TO RUN FOR
LONGER THAN A MINUTE. IF THE
CUP IS WARM TO TOUCH ALLOW
IT TO COOL COMPLETELY
BEFORE CAREFULLY OPENING,
POINTED AWAY FROM YOUR
BODY TO AVOID INJURY.
• After blending, allow the
contents to settle and
release any pressure that
may have built up during the
extraction process by slowly
unscrewing the container
from the blade assembly.
Have the container pointed
away from you in case there
is any built-up pressure.
• If you need to blend for
longer than one minute,
blend for 1-minute intervals.
After the initial and each
subsequent 1-minute
blending cycle, allow the
motor base to shut o
completely and wait at least
one minute before starting
another cycle.
• Do not run for more than
3 consecutive 1-minute
intervals to prevent the
contents from overheating.
Allow contents to settle for
2-3 minutes after the third
extraction cycle to prevent
overheating and buildup of
pressure.
 DO NOT ALLOW BLENDED
MIXTURES TO SIT IN
A SEALED CONTAINER
FOR LONG PERIODS OF
TIME! Sugar in fruits and
vegetables can ferment over
time, releasing gases and
causing pressure to build
up in a sealed NutriBullet®
cup. If you will not consume
your smoothie immediately,
remove the blade, cover the
container with a lid or plastic
wrap, and refrigerate. Never
store any blended mixture
WARNING!
UserGuide_600-900_v10.indd 3 9/4/19 12:32 PM

4
in a sealed NutriBullet®cup
either unrefrigerated or for
any prolonged period of
time; contents will spoil
and ferment.
EXTRACTOR BLADE
SAFETY
Never store any extractor
blade in the motor base
unattached to a NutriBullet®
cup. An exposed blade can
present a laceration hazard.
BLADES ARE SHARP!
HANDLE CAREFULLY. Use
care when handling any
blade. To avoid laceration
injury, do not handle or touch
any blade edge.
AVOID CONTACT WITH
MOVING PARTS! Keep hands
and utensils out of and
away from the extractor
blade while blending food
to reduce the risk of severe
personal injury.
• To prevent leakage and
the possible separation
of components during
operation, properly align
and securely attach (hand
tighten) the blade to a
NutriBullet® cup, and check
for leakage before placing
it on the motor base and
operating your NutriBullet®.
• Once you have stopped your
NutriBullet®, wait until the
motor comes to a complete
stop and the unit powers
down completely before
removing the cup/extractor
blade from the motor base.
Taking the container o the
unit prior to complete power
down can cause damage to
the extractor blade coupling or
motor gear.
NEVER BLEND WITHOUT LIQUID
AS DOING SO MAY DAMAGE THE
EXTRACTOR BLADE
OR MOTOR.
• The cyclonic action® of
your NutriBullet®requires
the use of liquids to make
smoothies and other nutritious
beverages. The NutriBullet®is
not intended to be used as an
ice crusher or without liquids.
Always add liquid to your
smoothie.
• DO NOT USE the extractor blade
for grinding dry ingredients such
as grains, cereal, or coee, as
this may damage the motor
and/or the extractor blade.
• We recommend replacing
your extractor blade every 6
months (depending on use)
or as needed for optimal
performance.
• Certain configurations may
contain a milling blade. This
blade can be used for milling
herbs, spices, grains and seeds.
ELECTRICAL SAFETY
Do not use this product
in locations with dierent
electrical specifications or
WARNING!
WARNING!
UserGuide_600-900_v10.indd 4 9/4/19 12:32 PM

5
WARNING!
plug types. Do not operate
with any type of plug adapter
or voltage converter device,
as these may cause electrical
shorting, fire, electric shock,
personal injury or product
damage. This appliance has
important markings on the
plug blade. The cord is not
suitable for replacement. If
damaged the appliance shall
be replaced.
POLARIZED PLUG INFORMATION:
• Your NutriBullet®has a
polarized plug (one prong
is wider than the other) to
reduce the risk of electric
shock. This plug will correctly
fit in a polarized outlet only
one way. If the plug does
not fit fully in the outlet,
reverse the plug. If it still does
not fit, contact a qualified
electrician. For your safety, do
not modify the plug or motor
base in any way. Doing so will
increase risk of injury and void
the product’s warranty.
• The use of third-party
attachments, including canning
jars, is forbiden and may cause
fire, electric shock, personal
injury, or product damage and
will void the warranty.
• To avoid risk of electric shock,
never immerse the cord, plug,
or motor base of blender
in water or other electrical
current conducting liquids.
Discontinue use if the cord,
plug, or motor base
is damaged.
• Always UNPLUG the
NutriBullet®when it is not in
use or BEFORE assembling,
disassembling, changing
accessories, or cleaning. Do
not attempt to handle the
NutriBullet until all parts have
stopped moving.
• Periodically inspect all
NutriBullet®components for
damage or wear that may
impair proper function or
present an electrical hazard.
Assure that power cord
and plug are undamaged.
Discontinue use and replace
NutriBullet®cup if you detect
cracking, crazing, cloudiness
or damage to the plastic.
Assure that the blades rotate
freely and that the gasket
is seated and undamaged.
Assure that motor base switch
actuators are unobstructed,
clean, and depress easily.
Follow maintenance
instructions in this user
guide on pages 14-15. Never
operate your NutriBullet®with
damaged components. If
your NutriBullet®malfunctions
in any way, immediately
discontinue use and contact
NutriBullet Customer Service
at 1 [phone].
• Do not allow the cord to hang
over the edge of the table or
counter. Do not pull, twist, or
damage the power cord. Do
not allow cord to touch hot
surfaces, including the stove.
• If the motor stops working,
UserGuide_600-900_v10.indd 5 9/4/19 12:32 PM

6
unplug the motor base and
let it cool for an hour before
attempting to use it again. Your
NutriBullet®has an internal
thermal breaker that shuts o
the motor when it overheats.
The thermal breaker will reset
when the unit is unplugged
and the thermal breaker cools
down suciently.
VENTILATION
To prevent a fire hazard,
the openings on the bottom
of the motor base should
be free of dust or lint and
never obstructed as they
are provided for ventilation
to ensure reliable motor
operation to prevent over
heating. Never place your
NutriBullet®on top of
flammable materials such
as newspapers, tablecloths,
napkins, dishtowels, place
mats or other similar type of
materials.
• CAUTION! Always operate the
NutriBullet®on a level surface,
leaving unobstructed space
beneath and around the motor
base to permit proper air
circulation. Slots on the bottom
of the motor base are provided
for ventilation to ensure reliable
operation and to prevent motor
overheating.
MICROWAVE & STOVE
TOP HEATING SAFETY
• DO NOT BLEND HOT
INGREDIENTS! After blending
room temperature or cooler
ingredients (21°C/70°F or
less), transfer mixture to an
unsealed, microwave-safe
container or to a stove-top
pot to heat. Always use a
thermometer to test the
internal temperature of cooked
ingredients, they may feel cool
to the touch, but still be hot
inside.
• Do not place any of the
NutriBullet®parts in a
microwave, oven or stove-top
pot or immerse in boiling water
as this may result in damage to
the accessory
• Avoid blending the following
seeds and pits in the
NutriBullet®, as they contain
a chemical known to release
cyanide into the body when
ingested: apple seeds, cherry
pits, plum pits, peach pits, and
apricot pits. Fruit pits may also
cause damage to the blade
and cup.
MEDICAL SAFETY
• The information contained in
this user guide is not meant
to replace the advice of your
physician. Always consult your
physician regarding health and
nutrition concerns.
MEDICATION INTERACTIONS:
• If you are taking any
medication, especially
cholesterol lowering
medication, blood
thinners, blood pressure
WARNING!
UserGuide_600-900_v10.indd 6 9/4/19 12:32 PM

7
drugs, tranquilizers, or
antidepressants, please check
with your physician before
trying any of the smoothie
recipes contained in the
Recipe Guide.
ADDITIONAL
INSTRUCTIONS FOR
PROPER USAGE
• TO AVOID LEAKAGE, DO
NOT OVERFILL THE CUP!
Make sure ingredients and
liquid do not exceed the MAX
line. The cyclonic action®
of the NutriBullet®requires
space to extract eectively
and exceeding the MAX line
can result in leakage and
may create a dangerous
pressurization which can
cause the vessel and blade
assembly to separate.
• Cup and extractor blades
are specific to the exact
model of NutriBullet®. Use
of incompatible parts (parts
from other models) may
result in damage to your
NutriBullet®or create safety
hazards. When replacing
cups or an extractor blade
or ordering additional
accessories from
nutribullet.com, or by
contacting Customer Service,
please specify the model for
parts that are compatible
with your unit.
• Periodically inspect all
NutriBullet®components
for damage or wear that
may impair proper function
or present an electrical
hazard. Make sure that the
power cord and plug are
undamaged. Discontinue
use and replace blending
vessels if you detect
cracking, cloudiness,
or other damage to the
vessel, tabs on the vessel or
actuator tabs of the motor
base. Ensure that the blades
rotate freely and that the
structure is undamaged.
Make sure that the motor
base is unobstructed and
clean. Follow maintenance
recommended in pages 14
and 15 and never operate
your NutriBullet®with
damaged components.
If your NutriBullet®
malfunctions in any way,
immediately discontinue
use and contact Customer
Service at 1 (800) 523-
5993. You may purchase
new NutriBullet®cups,
and extractor blades
at nutribullet.com or by
contacting Customer
Service. WE RECOMMEND
REPLACING YOUR CUP
EVERY SIX MONTHS.
Save these
instructions!
If you have any comments,
questions, or concerns, please
go to nutribullet.com. Or call
Customer Service at:
1 [phone].
!
UserGuide_600-900_v10.indd 7 9/4/19 12:32 PM

8
UserGuide_600-900_v10.indd 8 9/4/19 12:32 PM

9
Contents.
10 What’s included
11 Assembly guide
12 NutriBullet®cup assembly & use
14 Care & maintenance.
14 How to clean the NutriBullet®
15 Replacement parts
16 NutriBullet®
one-year limited warranty
19 Warranty Registration
Thank you for purchasing the NutriBullet®
UserGuide_600-900_v10.indd 9 9/4/19 12:32 PM

10
Product configurations may vary. To see our full list of Nutribullet®
accessories please visit www.nutribullet.com.
What’s included.
motor base NutriBullet®cup
cup ringextractor blade
UserGuide_600-900_v10.indd 10 9/4/19 12:32 PM

11
Assembly guide.
NutriBullet®cup
extractor blade
motor base
UserGuide_600-900_v10.indd 11 9/4/19 12:32 PM

4
Place the extractor blade
onto the cup and twist until
it is tightly sealed.
PLEASE KEEP
THESE IMPORTANT
SAFEGUARDS IN
MIND WHEN USING
THE NUTRIBULLET®:
• Make sure the base is
plugged in for use.
•Handle the extractor blade
assembly with care, as the
blades are sharp.
• Never run the NutriBullet®
while empty.
• NutriBullet®accessories are
not intended to be used in the
microwave as it may damage
the accessories.
• Never leave the NutriBullet®
unattended while in use.
Never blend hot
ingredients when using any
NutriBullet®cup.
Heated ingredients can
pressurize sealed containers
when agitated and violently
expel hot contents upon
opening. Always start the
blending process with room
temperature or refrigerated
ingredients and liquids
(21°C/70°F or cooler).
WARNING!
NutriBullet®cup
assembly & use.
Add ingredients and liquid
to the NutriBullet®cup.
NOTE: Do not overfill! To avoid
leakage, do not add ingredients
beyond the MAX line.
3
1Review all warning and
caution statements in the
Important Safeguards
section (pg. 2-7) before
proceeding to Step 2.
2Place the motor base on
a clean, dry, level surface
such as a counter or table.
12
UserGuide_600-900_v10.indd 12 9/4/19 12:32 PM

13
Plug the power cord into
an electrical outlet.
5
6
Turn the cup upside down
and place it onto the motor
base, gently push and twist.
8
Unlock the assembly
by gently pushing and
untwisting the cup
counterclockwise.
NOTE: Blending should not require
longer than one minute to yield
smooth and creamy results.
CAUTION
Do not remove the extractor blade
from the NutriBullet®cup until blending
has completely ceased. Do not use the
extractor blade as a storage lid for your
cup. Some foods may contain active
ingredients or release gases that will
expand if left in a sealed container,
resulting in excessive pressure buildup
that can pose a risk of injury. When
storing contents in the cup, use plastic
wrap or foil to seal your container.
Always point contents away from your
body when unsealing.
UserGuide_600-900_v10.indd 13 9/4/19 12:32 PM

14
Care & maintenance.
MOTOR BASE:
• For the most part, the motor
base doesn’t really get dirty,
but if you neglect to twist the
extractor blade on to the cup
tightly, liquids can leak out
and get into the base and
stick to the activator buttons.
• To avoid risk of injury, NEVER
use your hands or utensils
to clean the white actuator
Tabs while the NutriBullet®is
plugged in.
• Do not remove the rubber or
plastic liners inside the motor
base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the inside
and outside of the motor base
until clean.
• Pay particular attention
to the white Actuator Tabs
on the inside of the motor
base to loosen any sticky
debris from drips and spills.
If necessary, you may use a
small brush to scrub the area
to ensure it is kept clean.
WARNING: Never submerge
the motor base in water.
Here’s how to clean
the NutriBullet®:
STEP 1:
The most important thing
— ALWAYS UNPLUG the
motor base from the power
supply outlet when it is
left unattended, before
assembling, disassembling,
changing accessories or
approaching parts that move
in use or when cleaning.Do not
attempt to handle the appliance
until all parts have stopped
moving!
STEP 2:
Remove the cup/extractor blade
assembly from the motor base.
STEP 3:
Clean the individual components
(motor base, extractor blades,
NutriBullet®cups) as follows:
Cleaning the NutriBullet®is easy,
simply place any of the pieces
(except for the motor base and
extractor blade) on the TOP
RACK of the dishwasher or hand
wash with warm soapy water
and rinse.
UserGuide_600-900_v10.indd 14 9/4/19 12:32 PM

15
replace immediately to
prevent possible personal
injury.
• NEVER USE A CUP WITH A
BROKEN, DAMAGED, OR
MISSING TAB AS DOING SO
MAY CAUSE THE CUP AND
MOTOR BASE TO SEPARATE
EXPOSING THE BLADE
ASSEMBLY!
STUBBORN CLEAN UP:
• If ingredients dry inside the
NutriBullet®Cup, make your
cleanup a snap by filling the
cup about 2/3 full with room
temperature (21°C/70°F or
less) water and screw on
the extractor blade. Place
the cup/extractor blade
assembly on the NutriBullet®
motor base for about 20-30
seconds. This will loosen the
stuck ingredients, and with a
light scrub and rinse, you’ll
be all finished.
EXTRACTOR BLADE:
• DO NOT REMOVE THE
GASKET as this will
permanently damage the
extractor blade and cause
leakage. If after washing as
indicated above additional
disinfecting is desired,
you may rinse with a 10%
vinegar/water solution or
with lemon juice. If, over
time, the gasket becomes
loose or damaged, you may
order a new extractor blade
at NutriBullet.com or contact
Customer Service.
• Dry the extractor blade
completely. It is helpful to
turn the blade on its side in
your dish drainer to ensure
BOTH SIDES of the extractor
blade are completely dried.
NUTRIBULLET®CUPS
& TOGO LIDS:
• These items are all TOP
RACK dishwasher safe. We
recommend rinsing them
and giving them a quick
brush with a dish brush to
remove any dried debris
before washing them in the
dishwasher. NEVER use the
sanitize cycle to wash the
Cups as this may warp the
plastic.
• Regularly check the 3 tabs
on the side of the Cup
(cracking, crazing, breakage
or rounding). If damaged,
Replacement parts.
To order additional parts and
accessories, please visit our
website at nutribullet.com/
shop/accessories or feel free
to contact Customer Service:
1 [phone].
UserGuide_600-900_v10.indd 15 9/4/19 12:32 PM

16
NutriBullet®
one-year limited
warranty.
LIMITED WARRANTY
FOR NUTRIBULLET®
NutriBullet's limited warranty
obligations are confined to the
terms set forth below:
NutriBullet, LLC (“NutriBullet”)
warrants this NutriBullet®
against defects in materials
and workmanship for a period
of one year from the date
of original retail purchase.
This limited warranty is valid
only in the country in which
the product is purchased
and comes with the product
at no extra charge, however
shipping and processing fees
will be incurred for returns,
replacements and or refunds.
If a defect exists, and this
limited warranty is valid, at its
option NutriBullet®will (1) repair
the product at no charge, using
new or refurbished replacement
parts, (2) exchange the product
with a product that is new or
that has been manufactured
from new or serviceable used
parts and is at least functionally
equivalent to the original
product, or (3) refund the
purchase price of the product. A
replacement product assumes
the remaining warranty of the
original product. A repaired
product has a one-year
warranty from the date of
repair. When a product or part
is exchanged, any replacement
item becomes your property
and the replaced item becomes
NutriBullet’s property. When a
refund is given, your product
becomes NutriBullet’s property.
OBTAINING WARRANTY
SERVICE
For limited warranty service,
simply call our customer
service department at
1 [phone] or contact
us via email from our website
at nutribullet.com, simply click
the contact us link, fill out and
submit the customer contact
form and we will be glad to
help you. When you contact our
customer service department
you will be asked for your
name, address, telephone
number and to provide proof of
the original purchase (receipt)
UserGuide_600-900_v10.indd 16 9/4/19 12:32 PM

17
containing a description of the
product(s), purchase date, and
the appropriate NutriBullet®
serial number(s). Before you
send your product for limited
warranty service please make
sure to keep a copy of all
relevant documents for your
files (receipt, etc.). It is always
recommended to purchase
product insurance and tracking
services when sending your
product for service. Remember,
shipping and processing fees
will be incurred and are not
covered by the one-year
limited warranty.
EXCLUSIONS & LIMITATIONS
This NutriBullet®One-Year
Limited Warranty applies only to
NutriBullet products distributed
by or for NutriBullet that can be
identified by the “NutriBullet”
trademark, trade name, logo
and bar code. NutriBullet’s One-
Year Limited Warranty does
not apply to any other
products that may appear
to be authentic, but were not
distributed/sold by NutriBullet,
LLC.
Normal wear and tear is not
covered by this limited warranty.
This limited warranty applies
to consumer use only, and
is void when the product
is used in a commercial or
institutional setting.
This limited warranty
extends only to the original
consumer purchaser and is
not transferable. In addition,
proof of purchase must
be demonstrated.
Repair or replacement of
the product (or, if repair or
replacement is not feasible, a
refund of the purchase price)
is the exclusive remedy of the
consumer under this limited
warranty. NutriBullet, LLC shall
not be liable for any incidental
or consequential damages for
breach of this limited warranty
or any implied warranty on
this product.
This limited warranty gives
you specific legal rights, and
you may also have other rights
which vary from state to state.
NutriBullet®is not liable for
any damage to products not
covered by this warranty (e.g.,
cups, book, User Guide).
This limited warranty does not
apply: (a) to damage caused
UserGuide_600-900_v10.indd 17 9/4/19 12:32 PM

18
by accident, abuse, misuse,
or misapplication; (b) to
damage caused by improper
maintenance (including
unauthorized parts service);
(c) to a product or a part that
has been modified in any way;
(d) if any NutriBullet®serial
number or trademark has been
removed or defaced; and or (e)
if the product has been used
with an adapter/converter.
THIS LIMITED WARRANTY
AND THE REMEDIES SET
FORTH ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER
WARRANTIES, REMEDIES
AND CONDITIONS, WHETHER
ORAL OR WRITTEN, EXPRESS
OR IMPLIED. NUTRIBULLET®
SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT
LIMITATION, WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE. IF NUTRIBULLET
CANNOT LAWFULLY DISCLAIM
IMPLIED WARRANTIES UNDER
THIS LIMITED WARRANTY,
ALL SUCH WARRANTIES,
INCLUDING WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN
DURATION TO THE DURATION
OF THIS LIMITED WARRANTY.
No NutriBullet®reseller, agent, or
employee is authorized to make
any modification to this warranty.
NUTRIBULLET IS NOT
RESPONSIBLE FOR DIRECT,
SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES
RESULTING FROM ANY
BREACH OF WARRANTY
OR CONDITION, OR UNDER
ANY OTHER LEGAL THEORY,
INCLUDING BUT NOT LIMITED
TO LOST PROFITS, DOWNTIME,
GOODWILL, DAMAGE TO
OR REPLACEMENT OF
EQUIPMENT AND PROPERTY.
NUTRIBULLET®SPECIFICALLY
DOES NOT REPRESENT THAT
IT WILL BE ABLE TO REPAIR
ANY PRODUCT UNDER THIS
LIMITED WARRANTY.
Some states and provinces
do not allow the exclusion
or limitation of incidental
or consequential damages
or exclusions or limitations
on the duration of implied
warranties or conditions,
so the above limitations or
exclusions may not apply to
you. This warranty gives you
specific legal rights, and you
may also have other rights
that vary by state or province.
UserGuide_600-900_v10.indd 18 9/4/19 12:32 PM

19
Warranty registration.
How to find serial number
under the motor base.
Please visit nutribullet.com/
shop/accessories or call
1.800.523.5993 to register
your new NutriBullet. You will
be asked to enter the Serial
Number* of your product, along
with the purchase date and
place of purchase.
The registration will enable us
to contact you in the unlikely
event of product safety
notification. By registering
your product you acknowledge
to have read and understood
the instructions for use, and
warnings set forth in the
accompanying instructions.
UserGuide_600-900_v10.indd 19 9/4/19 12:32 PM

1.800.523.5993 | nutribullet.com
NutriBullet, LLC | www.nutribullet.com | All rights reserved.
NutriBullet andtheNutriBullet logo are trademarks ofCapBran Holdings, LLC
registered in theU.S.A. andworldwide.
Illustrations may dier from theactual product. Weare constantly striving
to improve our products, therefore thespecifications contained herein
are subject tochange without notice.
190904_NBR & NB9 Series
UserGuide_600-900_v10.indd 20 9/4/19 12:32 PM