NUTRIBULLET PRO+ 1200 User manual

Please carefully read the enclosed
User Guide prior to operating your unit.
PRO+ 1200
™
 LEA CUIDADOSAMENTE EL MANUAL ANTES DE USAR SU APARATO
 REPASE Y GUARDE ESTAS INDICACIONES
 CONSERVE Y GUARDE ESTAS ADVERTENCIAS DE SEGURIDAD PARA FUTURA REFERENCIAS
User guide.
LICUADORA
MARCA: NUTRIBULLET®
MODELO: NB-207
ESPECIFIACIONES ELECTRICAS:
120 V ~ 60Hz 1200W máx IPX2
HECHO EN: CHINA

32
GENERAL SAFETY
INFORMATION
• This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
• Children should be supervised
to ensure that they do not
play with the appliance.
 NEVER LEAVE THE
NUTRIBULLET® UNATTENDED
WHILE IT IS IN USE
 DO NOT USE OUTDOORS
 ALWAYS UNPLUG THE
NUTRIBULLET®WHEN
NOT IN USE
Important safeguards.
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC
SAFETY PRECAUTIONS SHOULD ALWAYS BE OBSERVED,
INCLUDING THE FOLLOWING:
Warning! To avoid the risk of serious injury, carefully
read all instructions before operating your nutribulllet®.
When using any electrical appliance, basic safety
precautions should always be observed, including
the following important information.
Save these instructions!
FOR HOUSEHOLD USE ONLY
HEAT & PRESSURE
SAFETY
To avoid personal injury,
never blend hot or
carbonated ingredients
in any sealed
nutribullet®Cup!
Heated ingredients
can pressurize sealed
containers when agitated
and violently expel hot
contents upon opening.
Always start the blending
process with room
temperature or refrigerated
ingredients and liquids
(21°C/70°F or cooler).
Never continuously operate
for longer than necessary
to create your recipe —
generally less than one
minute.
!
WARNING!
Never blend carbonated
liquids or eervescing
ingredients (e.g., baking
soda, baking powder,
yeast, etc.). Pressure from
released gases can cause
a sealed nutribullet®cup to
burst, resulting in possible
injury and/or property
damage. Blade friction
from prolonged operation
can heat ingredients and
generate internal pressure
in the sealed container. This
pressure can cause the cup
and blade to separate or
blended contents to erupt
from the container, resulting
in possible personal injury
and/or property damage.
If the sealed nutribullet®
cups are warm to the touch,
power o your machine
and allow the vessel to cool
for fifteen minutes or more.
Allow contents to settle
before slowly releasing
the cup from the motor
base. With the nutribullet®
cup, pointed away from
your face and body, slowly
unscrew the extractor
blade to gently release any
residual pressure.
FRICTION FROM THE ROTATING
EXTRACTOR BLADES WHEN
BLENDING CAN CAUSE
INGREDIENTS TO HEAT
AND GENERATE INTERNAL
PRESSURE IN THE SEALED CUP,
IF PERMITTED TO RUN FOR
LONGER THAN A MINUTE. IF
THE CUP IS WARM TO TOUCH
ALLOW IT TO COOL COMPLETELY
BEFORE CAREFULLY OPENING,
POINTED AWAY FROM YOUR
BODY TO AVOID INJURY.
• After blending, allow the
contents to settle and release
any pressure that may have
built up during the extraction
process by slowly unscrewing
the container from the blade
assembly. Have the container
pointed away from you in
case there is any built-up
pressure.
• If you need to blend for
longer than one minute,
blend for 1-minute intervals.
After the initial and each
subsequent 1-minute
blending cycle, allow the
motor base to shut o
completely and wait at least
one minute before starting
another cycle.
• Do not run for more than
3 consecutive 1-minute
intervals to prevent the
contents from overheating.
Allow contents to settle for
2-3 minutes after the third
extraction cycle to prevent
overheating and buildup of
pressure.
WARNING!

54
 DO NOT ALLOW BLENDED
MIXTURES TO SIT IN
A SEALED CONTAINER
FOR LONG PERIODS OF
TIME! Sugar in fruits and
vegetables can ferment over
time, releasing gases and
causing pressure to build
up in a sealed nutribullet®
cup. If you will not consume
your smoothie immediately,
remove the blade, cover the
container with a lid or plastic
wrap, and refrigerate. Never
store any blended mixture
in a sealed nutribullet®cup
either unrefrigerated or for
any prolonged period of
time; contents will spoil
and ferment.
EXTRACTOR BLADE
SAFETY
Never store any extractor
blade in the motor base
unattached to a nutribullet®
cup. An exposed blade can
present a laceration hazard.
BLADES ARE SHARP!
HANDLE CAREFULLY. Use
care when handling any
blade. To avoid laceration
injury, do not handle or touch
any blade edge.
AVOID CONTACT WITH
MOVING PARTS! Keep hands
and utensils out of and
away from the extractor
blade while blending food
to reduce the risk of severe
personal injury.
• To prevent leakage and
the possible separation of
components during operation,
properly align and securely
attach (hand tighten) the
blade to a nutribullet® cup,
and check for leakage before
placing it on the motor
base and operating your
nutribullet®.
• Once you have stopped your
nutribullet®, wait until the
motor comes to a complete
stop and the unit powers down
completely before removing
the cup/extractor blade from
the motor base. Taking the
container o the unit prior to
complete power down can
cause damage to the extractor
blade coupling or motor gear.
NEVER BLEND WITHOUT LIQUID
AS DOING SO MAY DAMAGE THE
EXTRACTOR BLADE
OR MOTOR.
• The cyclonic action® of
your nutribullet®requires
the use of liquids to make
smoothies and other nutritious
beverages. The nutribullet®is
not intended to be used as an
ice crusher or without liquids.
Always add liquid to your
smoothie.
• DO NOT USE the extractor blade
for grinding dry ingredients such
as grains, cereal, or coee, as
this may damage the motor
and/or the extractor blade.
WARNING!
• We recommend replacing
your extractor blade every 6
months (depending on use)
or as needed for optimal
performance.
• Certain configurations may
contain a milling blade. This
blade can be used for milling
herbs, spices, grains and seeds.
ELECTRICAL SAFETY
Do not use this product
in locations with dierent
electrical specifications or
plug types. Do not operate
with any type of plug adapter
or voltage converter device,
as these may cause electrical
shorting, fire, electric shock,
personal injury or product
damage. This appliance has
important markings on the
plug blade. The cord is not
suitable for replacement. If
damaged the appliance shall
be replaced.
• If the supply cord is damaged,
it must be replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
• The use of third-party
attachments, including canning
jars, is forbiden and may cause
fire, electric shock, personal
injury, or product damage and
will void the warranty.
• To avoid risk of electric shock,
never immerse the cord, plug,
or motor base of blender
in water or other electrical
current conducting liquids.
Discontinue use if the cord,
plug, or motor base
is damaged.
• Switch o the appliance
and disconnect from power
supply before changing
accessories or handling
moving parts.
• Periodically inspect all
nutribullet®components for
damage or wear that may
impair proper function or
present an electrical hazard.
Assure that power cord
and plug are undamaged.
Discontinue use and replace
nutribullet®Cup if you
detect cracking, crazing,
cloudiness or damage to
the plastic. Assure that the
blades rotate freely and that
the gasket is seated and
undamaged. Assure that
motor base switch actuators
are unobstructed, clean,
and depress easily. Follow
maintenance instructions in
this user guide on pages 14-15.
Never operate your nutribullet®
with damaged components. If
your nutribullet®malfunctions
in any way, immediately
discontinue use and contact
nutribullet®Customer Service
at 800-nbullet.

76
• Do not allow the cord to hang
over the edge of the table or
counter. Do not pull, twist, or
damage the power cord. Do
not allow cord to touch hot
surfaces, including the stove.
• If the motor stops working,
unplug the motor base and
let it cool for an hour before
attempting to use it again. Your
nutribullet®has an internal
thermal breaker that shuts o
the motor when it overheats.
The thermal breaker will reset
when the unit is unplugged
and the thermal breaker cools
down suciently.
• CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cut-
out, this appliance must not be
supplied through an external
switching device, such as a
timer, or connected to a circuit
that is regularly switched on
and o by the utility.
VENTILATION
To prevent a fire hazard,
the openings on the bottom
of the motor base should
be free of dust or lint and
never obstructed as they
are provided for ventilation
to ensure reliable motor
operation to prevent over
heating. Never place your
nutribullet®on top of
flammable materials such
as newspapers, tablecloths,
napkins, dishtowels, place
mats or other similar type
of materials.
• CAUTION! Always operate the
nutribullet®on a level surface,
leaving unobstructed space
beneath and around the
motor base to permit proper
air circulation. Slots on the
bottom of the motor base are
provided for ventilation to
ensure reliable operation and
to prevent motor overheating.
MICROWAVE & STOVE
TOP HEATING SAFETY
• DO NOT BLEND HOT
INGREDIENTS! After blending
room temperature or cooler
ingredients (21°C/70°F or
less), transfer mixture to an
unsealed, microwave-safe
container or to a stove-top
pot to heat. Always use a
thermometer to test the
internal temperature of cooked
ingredients, they may feel cool
to the touch, but still be hot
inside.
• Caution must be observed if
hot liquid is poured into the
product (food processor or
blender) as it can be ejected
out of the appliance due to a
sudden steaming.
• Do not place any of the
nutribullet®parts in a
microwave, oven or stove-top
pot or immerse in boiling water
as this may result in damage
to the accessory.
• Avoid blending the following
seeds and pits in the
nutribullet®, as they contain a
chemical known to release
cyanide into the body when
ingested: apple seeds, cherry
pits, plum pits, peach pits, and
apricot pits. Fruit pits may also
cause damage to the blade
and cup.
MEDICAL SAFETY
• The information contained in
this user guide is not meant
to replace the advice of your
physician. Always consult your
physician regarding health
and nutrition concerns.
MEDICATION INTERACTIONS:
• If you are taking any
medication, especially
cholesterol lowering
medication, blood
thinners, blood pressure
drugs, tranquilizers, or
antidepressants, please check
with your physician before
trying any of the smoothie
recipes contained in the
Recipe Guide.
ADDITIONAL
INSTRUCTIONS FOR
PROPER USAGE
• TO AVOID LEAKAGE, DO
NOT OVERFILL THE CUP!
Make sure ingredients and
liquid do not exceed the MAX
line. The cyclonic action®
of the nutribullet®requires
space to extract eectively
and exceeding the MAX line
can result in leakage and
may create a dangerous
pressurization which can
cause the vessel and blade
assembly to separate.
• Cup and Extractor Blades
are specific to the exact
model of nutribullet®. Use of
incompatible parts (parts
from other models) may result
in damage to your nutribullet®
or create safety hazards.
When replacing cups or an
extractor blade or ordering
additional accessories from
nutribullet.mx, or by
contacting Customer Service,
please specify the model for
parts that are compatible
with your unit.
• Periodically inspect all
nutribullet®components
for damage or wear that
may impair proper function
or present an electrical
hazard. Make sure that the
power cord and plug are
undamaged. Discontinue use
and replace blending vessels
if you detect cracking,
cloudiness, or other damage
to the vessel, tabs on the
vessel or actuator tabs of the
motor base. Ensure that the
blades rotate freely and that
the structure is undamaged.
Make sure that the motor
base is unobstructed and
clean. Follow maintenance
recommended in pages 14
and 15 and never operate
your nutribullet®with
damaged components.
If your nutribullet®
WARNING!

Thank you for purchasing the nutribullet®Pro Pulse 1200™.
Contents.
10 Assembly guide
11 nutribullet®Cup assembly & use
12 Pulse mode
14 Care & maintenance.
14 How to clean the nutribullet®
15 Replacement parts
98 9
malfunctions in any way,
immediately discontinue use
and contact Customer Service
at 800-nbullet. You may
purchase new nutribullet®
cups, and extractor blades
at nutribullet.mx or by
contacting Customer Service.
WE RECOMMEND REPLACING
YOUR CUP EVERY SIX
MONTHS.
Save these
instructions!
If you have any comments,
questions, or concerns, please
go to nutribullet.mx.
!

Assembly guide.
nutribullet®cup
extractor blade
motor base
CAUTION: Do not run the
Motor Base in excess of 1
minute per interval. Do not
run the Motor Base for more
than three 1-minute intervals
without allowing it to cool
for 2-3 minutes after the
third extraction. Running the
motor for more than 1 minute
consecutively in any interval
may warm the ingredients and
pressurize the nutribullet
®
Cup.
Friction from the rotating
Extractor Blade when
extracting can cause
ingredients to heat and
generate internal pressure in
the sealed vessel. If the vessel
is warm to touch, allow to
cool before carefully opening
pointed away from your body.
Place the Extractor
Blade onto the
nutribullet®Cup
and twist until it is
tightly sealed.
Turn the nutribullet®
Cup upside down and
place it onto the Motor
Base. Gently push and
twist, 60-second auto
blending cycle will be
activated. The blue
light and unit will shut
o once auto-mode
is completed.
Unlock the
assembly by gently
pushing and
untwisting the cup
counterclockwise.
Once the Extractor
Blade stops
completely, remove
the nutribullet®
Cup from the
Motor Base. Enjoy!
Add ingredients* to
the nutribullet®Cup.
1
54
2
3
SEE USER GUIDE FOR DETAILED
ASSEMBLY INSTRUCTIONS
nutribullet®cup
assembly.
10 11
PULSE

To Pulse, push and twist the
nutribullet®Cup onto the
Power Base. Press the Pulse
Button within 5 seconds of
blending, which will pause
current blending cycle to
activate manual pulse mode.
The Pulse Button will flash
BLUE indicating that it's in Pulse
Mode.
NOTE: Pulse Mode is active for 1 minute
and then times out. If the Vessel is still in
the ON position, nothing will happen. The
Vessel must be rotated counter-clockwise
to OFF position and then normal function
may be resumed.
Pulse mode.
Because the nutribullet’s motor
is so powerful, it emulsifies
the ingredients when you
extract. That is why when
you want to make foods such
as chunky salsa, or coarse
chopped onions, Pulse Mode
is key. Pulsing takes a tiny
bit of getting used to, but
once you get a feel for it,
you’ll be a Pro in no time!
1
pulse
button
PULSE
2
PULSE
Press and hold the Pulse Button
to make the Blades turn. Release
the Pulse Button to stop the
Blades. Let the Blades come to a
complete stop after each Pulse
and press the Pulse Button again
until you get the consistency
you desire.
CAUTION: Do not run the Motor Base
in excess of 1 minute per interval. Do not
run the Motor Base for more than three
1-minute intervals without allowing it
to cool for 2-3 minutes after the third
extraction. Running the motor for more
than 1 minute consecutively in any interval
may warm the ingredients and pressurize
the nutribullet
®
Cup.
Friction from the rotating Extractor Blade
when extracting can cause ingredients
to heat and generate internal pressure
in the sealed vessel. If the vessel is warm
to touch, allow to cool before carefully
opening pointed away from your body.
3
PULSE
1312

14 15
Care & maintenance.
MOTOR BASE:
• For the most part, the Motor
Base doesn’t really get dirty,
but if you neglect to twist
the Extractor Blade on to
the nutribullet®Cup tightly,
liquids can leak out and get
into the Motor Base and stick
to the activator buttons.
• To avoid risk of injury, NEVER
use your hands or utensils
to clean the white actuator
Tabs while the nutribullet®
is plugged in.
• Do not remove the rubber
or plastic liners inside the
Motor Base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the inside
and outside of the Motor
Base until clean.
• Pay particular attention
to the white actuator tabs
on the inside of the Motor
Base to loosen any sticky
debris from drips and spills.
If necessary, you may use a
small brush to scrub the area
to ensure it is kept clean.
WARNING: Never submerge
the Motor Base in water.
Here’s how to clean
the nutribullet®:
STEP 1:
The most important
thing — ALWAYS UNPLUG
the Motor Base from the
power supply outlet when
it is left unattended, before
assembling, disassembling,
changing accessories or
approaching parts that move
in use, or when cleaning.
Do not attempt to handle
the appliance until all parts
have stopped moving!
STEP 2:
Remove the nutribullet®Cup/
Extractor Blade assembly from
the Motor Base.
STEP 3:
Clean the individual components
(Motor Base, Extractor Blades,
nutribullet®Cups) as follows:
Cleaning the nutribullet®is easy,
simply place any of the pieces
(except for the Motor Base and
Extractor Blade) on the TOP
RACK of the dishwasher or hand
wash with warm soapy water
and rinse.
rounding). If damaged,
replace immediately to
prevent possible personal
injury.
• NEVER USE A CUP WITH A
BROKEN, DAMAGED, OR
MISSING TAB AS DOING SO
MAY CAUSE THE CUP AND
MOTOR BASE TO SEPARATE
EXPOSING THE BLADE
ASSEMBLY!
STUBBORN CLEAN UP:
• If ingredients dry inside the
nutribullet®Cup, make your
cleanup a snap by filling the
cup about 2/3 full with room
temperature (21°C/70°F or
less) water and screw on the
Extractor Blade. Place the
nutribullet®Cup/Extractor
Blade assembly on the
nutribullet®Motor Base
for about 20-30 seconds.
This will loosen the stuck
ingredients, and with a light
scrub and rinse, you’ll be all
finished.
EXTRACTOR BLADE:
• DO NOT REMOVE THE
GASKET as this will
permanently damage the
Extractor Blade and cause
leakage. If after washing as
indicated above additional
disinfecting is desired,
you may rinse with a 10%
vinegar/water solution or
with lemon juice. If, over
time, the gasket becomes
loose or damaged, you may
order a new Extractor Blade
at nutribullet.mx
• Dry the Extractor Blade
completely. It is helpful to
turn the Extractor Blade on
its side in your dish drainer
to ensure BOTH SIDES of
the Extractor Blade are
completely dried.
NUTRIBULLET®CUPS
& TOGO LIDS:
• These items are all TOP
RACK dishwasher safe. We
recommend rinsing them
and giving them a quick
brush with a dish brush to
remove any dried debris
before washing them in the
dishwasher. NEVER use the
sanitize cycle to wash the
nutribullet®Cups as this
may warp the plastic.
• Regularly check the 3
tabs on the side of the
nutribullet®Cups (cracking,
crazing, breakage or
Replacement parts.
To order additional parts and
accessories, please visit our
website at nutribullet.mx

PRO+ 1200
™
 LEA CUIDADOSAMENTE EL MANUALANTES DE USAR SU APARATO
 REPASE Y GUARDE ESTAS INDICACIONES
 CONSERVE Y GUARDE ESTAS ADVERTENCIAS DE SEGURIDAD PARA FUTURA REFERENCIAS
Guía del usuario.
Por favor, lea atentamente la Guía
del usuario adjunto antes de
operar su unidad.
17
LICUADORA
MARCA: NUTRIBULLET®
MODELO: NB-207
ESPECIFIACIONES ELECTRICAS:
120 V ~ 60Hz 1200W máx IPX2
HECHO EN: CHINA

1918
comience el proceso de
licuado con ingredientes
y líquidos a temperatura
ambiente o refrigerados (21
°C/70 °F o menos).
Nunca opere continuamente
por más tiempo del necesario
para crear su receta,
generalmente menos de un
minuto.
Nunca mezcle líquidos
carbonatados o ingredientes
efervescentes (por ejemplo,
bicarbonato de sodio, polvo
de hornear, levadura, etc.).
La presión de los gases
liberados puede hacer que
un vaso nutribullet®sellada
explote, lo que puede
provocar lesiones y/o daños
a la propiedad. La fricción
de la cuchilla debido a una
operación prolongada puede
calentar los ingredientes y
generar presión interna en
el recipiente sellado. Esta
presión puede hacer que el
vaso y la cuchilla se separen o
que los contenidos mezclados
salgan del recipiente, lo que
podría provocar lesiones
personales y/o daños a
la propiedad. Si los vasos
sellados de nutribullet®están
calientes al tacto, apague
la máquina y deje que el
recipiente se enfríe durante
quince minutos o más.
Permita que el contenido
se asiente antes de liberar
lentamente el vaso de la
base del motor. Con el
vaso nutribullet®, apuntando
lejos de su cara y cuerpo,
desenrosque lentamente la
cuchilla extractora para liberar
suavemente cualquier
presión residual.
LA FRICCIÓN DE LAS
CUCHILLAS GIRATORIAS DEL
EXTRACTOR AL BATIR PUEDE
CAUSAR CALENTAMIENTO
DE LOS INGREDIENTES Y
GENERAR PRESIÓN INTERNA
EN EL VASO SELLADO, SI
SE PERMITE FUNCIONAR
DURANTE LA FRICCIÓN DE
LAS CUCHILLAS GIRATORIAS
DEL EXTRACTOR AL BATIR
PUEDE HACER QUE LOS
INGREDIENTES SE CALIENTEN
Y GENERAR PRESIÓN INTERNA
EN EL VASO SELLADO, SI SE
PERMITE QUE FUNCIONE POR
MÁS DE UN MINUTO. SI EL
VASO ESTÁ CALIENTE PARA
TOCARLO, DEJE QUE SE ENFRÍE
COMPLETAMENTE ANTES
DE ABRIR CON CUIDADO,
APUNTANDO ALEJADO
DE SU CUERPO PARA
EVITAR LESIONES.
• Después de mezclar, deje
que el contenido se asiente y
libere la presión que se haya
acumulado durante el proceso
de extracción desenroscando
lentamente el recipiente del
conjunto de cuchillas. Haga
¡ADVERTENCIA! ¡ADVERTENCIA!
INFORMACIÓN GENERAL
DE SEGURIDAD
• Este electrodoméstico no
está diseñado para que lo
usen personas (incluidos
los niños) con capacidades
físicas, sensoriales o mentales
reducidas, o falta de experiencia
y conocimiento, a menos que
una persona responsable de su
seguridad les haya supervisado
o instruido sobre el uso del
electrodoméstico.
• Los niños deben ser
supervisados para asegurarse
de que no jueguen con
el aparato.
 NUNCA DEJE EL NUTRIBULLET®
DESATENDIDO MIENTRAS
ESTÁ EN USO
Consideraciones
importantes.
AL UTILIZAR CUALQUIER APARATO ELÉCTRICO, SIEMPRE
DEBEN OBSERVARSE LAS PRECAUCIONES BÁSICAS DE
SEGURIDAD, INCLUIDAS LAS SIGUIENTES:
¡Advertencia! Para evitar el riesgo de lesiones graves,
lea cuidadosamente todas las instrucciones antes
de operar su nutribullet®.Al usar cualquier aparato
eléctrico, siempre se deben observar las precauciones
básicas de seguridad, incluida la siguiente
información importante.
Guarde estas instrucciones!
SOLO PARA USO DOMÉSTICO
 NO UTILIZAR AL AIRE LIBRE
 SIEMPRE DESENCHUFE EL
NUTRIBULLET®CUANDO NO
SE ENCUENTRE EN USO
SEGURIDAD DE CALOR
Y PRESIÓN
Para evitar lesiones
personales, ¡nunca mezcle
ingredientes calientes o
carbonatados en ningún
vaso nutribullet®sellado!
Los ingredientes calientes
pueden presurizar los
recipientes sellados cuando
se agitan y expulsar
violentamente el contenido
caliente al abrirlos. Siempre
!
¡ADVERTENCIA!