NUTRIBULLET BALANCE User manual

USER GUIDE

5Introduction
6Let’s Get Started
8Connecting with Bluetooth
9Troubleshooting
Using with Multiple Devices
10 Connecting and Disconnecting Manually
12 Disconnecting the Balance Blender
13 Start Making Your Recipes
22 Manual Mode
28 Cleaning the NutriBullet Balance Smart Nutrition Sensor and Well
Table of
Contents
2 3

The NutriBullet just got smarter with NutriBullet Balance! Born from a
quest for blending excellence, NutriBullet Balance features Bluetooth 4.0
Smart Nutrition Sensor technology that sends REAL-TIME nutrition data
to your smart device as you blend recipes. View carbs, calories, protein,
sugar and more in real time! This provides tighter control over blends by
letting you know exactly what you’re making as you’re making it. Unlike
other blenders, with NutriBullet Balance nothing is left to chance, you
always know exactly what you’re getting!
Watch recipes come to life and tweak them on the fly to suit your taste.
No more sugary treats disguised as healthy smoothies or protein shakes
in name only. With NutriBullet Balance the smoothie you envision is the
smoothie you can make, down to the gram, every time.
We hope you’ll enjoy this member of the NutriBullet family as much as we
do. Say goodbye to measuring cups, eyeballed amounts and wild card
results...with NutriBullet Balance, the only thing you’ll be eyeballing is a
better YOU!
The Evolution
of Blending
4 5

Let’s Get Started!
Download the NutriBullet Balance App from
NutriBulletBalance.com/app
or find it in either:
6 7

Connecting with Bluetooth*
The NutriBullet Balance Blender uses Bluetooth Smart
technology to connect to the Balance App on your
smartphone or tablet. To connect the Balance Blender to
your device:
1. Make sure your smart device has Bluetooth turned on.
2. Open the NutriBullet Balance App.
3. Plug in your NutriBullet Balance Blender; the button’s blue
light will blink three times and go o.
4. The Balance Blender will connect to the App
automatically, and the blue light will come on. See the
following section if it does not.
Connected
Not Connected
Troubleshooting
Using with Multiple Devices
Your NutriBullet Balance Blender can only connect to one device at a time. If you
are having trouble connecting, make sure the Balance Blender is not connected
to a dierent device.
If your Balance Blender is still connected to a previously used device, quit the
NutriBullet Balance App running on that device. The Balance Blender will
disconnect automatically.
*For phone/tablet compatibility, go to makeitperfectly.com/compatibility.
8 9

Connecting and
Disconnecting Manually
You can connect to or disconnect
from the Balance Blender manually in
the Balance App. Touch the Balance
Blender icon to the right of the search
box to open the Available Blenders list.
The App will display a check mark next
to the Balance Blender it is currently
connected to.
Touch a Balance Blender in the list to
connect to it or disconnect from it.
10 11

Disconnecting the Balance Blender
You can force the Balance
Blender to disconnect from the device
it is connected to by touching and
holding the button on the blender.
The light will
turn o.
Start
Making
Your
Recipes
A. Make sure your Balance
Blender is connected to
the App.
B. Press the icon and, in
the Search bar, type in
the name of the recipe or
choose from our recipe
categories.
A
B
12 13

C
C. View recipes and
ratings quickly by
using filters. Select
your recipe.
D. Click on the BLEND
button.
When prompted,
remove all items
from the Base.
NOTE: Make sure
nothing is on top of
the Smart Nutrition
Sensor.
D
14 15

E. When prompted,
place the Balance
Cup on the Power
Base, open side up.
E
F
F. Follow the step-by-
step directions in the
recipe.
NOTE: To prevent
leakage when creating
a recipe, ALWAYS
make sure that the
ingredients do not
extend above the MAX
line.
NOTE: Make sure
the Smart Nutrition
Sensor is in place.
16 17

G
G. When prompted, twist
the Blade onto the
cup. Flip-over the cup,
place it onto the base,
then push and twist to
the right. The Balance
Blender will start
blending.
H. Wait until the
timer stops.
H
18 19

I. Push and twist the
Cup and Blade to
the left to release
them from the
Power Base.
Remove the Blade.
Enjoy!
20 21

1 Add ingredients
to the Colossal Cup.
 Add the liquid of your
choice up to
the MAX line. (Liquid is
required! Ingredients
should not exceed the
MAX line!).
To Blend:
NOTE: The NutriBullet
Balance Cup requires room
to properly extract and blend
the ingredients completely.
Exceeding the MAX line may
result in leakage.
Manual Mode
You can use the NutriBullet Balance without using the Balance App.
This is called Manual Mode. This mode is used for simply blending.
PLEASE NOTE: you will not get any nutritional information or data in
Manual Mode.
22 23

4 Fit the vessel Blade-side down onto the Power
Base, aligning the actuator tabs. Press down to begin
extraction, gently rotating the Cup clockwise to lock
the cup in place. Extract for no longer than 1 minute. If
more extraction is needed, wait 1 minute, then repeat
the extraction process in 1 minute intervals up to three
times as needed to achieve the desired consistency. If
more than three 1-minute extractions are needed, allow
the Power Base to cool for 2-3 minutes after the third
extraction before beginning the next round.
NOTE: If the unit is not allowed to cool as instructed, a
safety feature triggers that will power o the unit and
temporarily render it non-functioning. To reset this safety
feature, simply unplug the unit for 15 seconds and plug it
back in. Unit will resume normal function.
3 Twist the
Extractor Blade
onto the Colossal Cup
and hand-tighten to
make sure the vessel has
been sealed.
24 25

CAUTION:
• Do not run the Power Base in excess of 1 minute per interval. Do not run the
Power Base for more than three 1-minute intervals without allowing it to cool
for 2-3 minutes after the third extraction. Running the motor for more than 1
minute consecutively in any interval may result in permanent damage to the
Power Base.
•Friction from the rotating Blade when extracting can cause ingredients to heat
and generate internal pressure in the sealed vessel. If the vessel is warm to
touch, allow to cool before carefully opening it pointed away from your body.
5 To turn o the NutriBullet Balance — simply
twist in the opposite direction (counter-clockwise)
to release the tabs and stop pressing down on
the Cup. Once the Power Base stops completely,
remove the Cup from the Power Base.
26 27

Step 3:
Remove the
Smart Nutrition Sensor™
from the Power Base.
Cleaning the NutriBullet Balance
Smart Nutrition Sensor™and Well
For the most part the Power Base doesn’t really get dirty, but if you neglect to
twist the Blade onto the Cup tightly, liquids can leak out and get into the Base
and actuator tabs. If this happens please use the following cleaning instructions.
Step 1: The most important thing is to UNPLUG the Power Base before
cleaning!
Step 2: Make sure the Blade is not attached to the Power Base.
28 29

Step 5:
Wipe the well in the
bottom of the Power
Base with a damp cloth
until clean.
Step 4:
Wipe the Smart
Nutrition Sensor™with
a damp cloth until clean.
NOTE: The Smart Nutrition Sensor
is a delicately calibrated scale.
Handle with care. If it is dropped or
jarred it may damage the calibration
causing it not to connect or detect
the placement of the Cup. If this
occurs, please contact customer
service for assistance.
30 31

Thank you for purchasing
your NutriBullet Balance.
Enjoy!
Step 6:
Replace the Smart
Nutrition Sensor™by
lining up the arrow on
the Disc to the arrow in
the well of the Power
Base. Gently press down
until the Disc is level.
32 33

GEBRUIKERSHANDLEIDING
37 Introductie
38 Verbinden met Bluetooth
39 Troubleshooting
Gebruik met meerdere apparaten
40 Handmatig verbinden en loskoppelen
42 Ontkoppel de NutriBullet Balance
43 Begin met het gebruik van recepten
51 Handmatige bediening
56 Reinigen van de NutriBullet Balance Smart Nutrition SensorTM
en weegschaal
34 35

REVOLUTIONAIR
BLENDEN!!
NutriBullet Balance is ontstaan na een zoektocht van technische innovatie naar
ultiem gebruiksgemak. De Bluetooth 4.0 Smart Nutrition Sensor-technologie
verzendt REAL-TIME voedingswaardegegevens naar je NutriBullet terwijl je een
recept maakt. Bekijk real-time de hoeveelheid koolhydraten, calorieën, eiwitten,
suiker en meer! Dit geeft je controle, je weet precies wat je aan het maken bent.
Met de NutriBullet Balance wordt niets aan het toeval overgelaten en je weet
altijd precies wat je binnenkrijgt aan voedingswaardes!
Laat recepten tot leven komen en stem ze af op jouw persoonlijke smaak. Vanaf
nu geen suikerhoudende lekkernijen meer die vermomd zijn als een gezonde
smoothie of eiwitshake. Met NutriBullet Balance stel je de smoothie die je voor
ogen hebt tot op een gram nauwkeurig samenstellen, elke keer weer.
Wij hopen dat je net zo zult genieten van dit lid van de NutriBullet-familie als wij.
Ben je klaar om je gevoel van welzijn een boost te geven en afscheid te nemen
van receptenboeken, eetprogramma's en maatbekers? Met NutriBullet BalanceTM
is SMART gepersonaliseerde voeding binnen handbereik. Wat je zult
oogsten is een betere JIJ!
36 37

Verbinden met Bluetooth
De NutriBullet Balance maakt gebruik van Bluetooth
Smart-technologie om verbinding te maken met de
Balance-app op je smartphone of tablet.
Om de Balance te verbinden:
1. Zorg dat op je smart-phone de Bluetooth is ingeschakeld.
2. Open de NutriBullet Balance-app.
3. Sluit je NutriBullet Balance basisunit aan; het blauwe
lampje van de knop knippert driemaal en gaat uit.
4. De NutriBullet Balance maakt automatisch verbinding
met de App en het blauwe lampje gaat branden. Zie het
volgende gedeelte als dit niet het geval is.
VERBONDEN
NIET VERBONDEN
Troubleshooting
Gebruik met meerdere apparaten
Je NutriBullet Balance kan maar op één apparaat tegelijk worden aangesloten.
Als je problemen ondervindt bij het verbinden, zorg er dan voor dat de Balance
niet op een ander apparaat is aangesloten.
Als je Balance nog steeds is verbonden met een eerder gebruikt apparaat, sluit
de NutriBullet Balance-app die op dat apparaat wordt uitgevoerd af. De Balance
zal automatisch ontkoppelen.
* Ga naar www.makeitperfectly.com/compatibility voor compatibiliteit
met telefoon / tablet.
38 39