Nuvico Easy Trak SC-S36 User manual

SC-S36
PTZ DOME SYSTEM

2

3
Disclaimer
• Whileeveryefforthasbeenmadetoensurethattheinformationcontainedinthisguide
isaccurateandcomplete,noliabilitycanbeacceptedforanyerrorsoromissions
• NUVICOreservestherighttochangethespecicationsofthehardwareandsoftware
describedhereinatanytimewithoutpriornotice.
• Nopartofthisguidemaybereproduced,transmitted,transcribed,storedinaretrieval
system,ortranslatedintoanylanguageinanyform,byanymeans,withoutpriorwritten
permissionofNUVICO.
• NUVICOmakesnowarrantiesfordamagesresultingfromcorruptedorlostdatadueto
amistakenoperationormalfunctionofthecameras,peripheraldevices,orunapproved/
unsupporteddevices.

4
WARNING!
TOREDUCETHERISKOFFIREORELECTRICSHOCK,DONOTEXPOSETHISPRODUCT
TORAINORMOISTURE.DONOTINSERTANYMETALLICOBJECTSTHROUGHTHE
VENTILATIONGRILLSOROPENINGSONTHEEQUIPMENT.
Warning and Caution
Thelightningashwitharrowheadsymbol,withinanequilateraltriangle,isintendedto
alerttheusertothepresenceofuninsulated“dangerousvoltage”withintheproduct’s
enclosurethatmaybeofsufcientmagnitudetoconstituteariskofelectricshockto
persons.
CAUTION!
Theexclamationpointwithinanequilateraltriangleisintendedtoalerttheusertothe
presenceofimportantoperatingandmaintenance(servicing)instructionintheliterature
accompanyingtheproduct.

5
FCC Compliance Statement
FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO
COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO
PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN
THE EQUIPMENT IS OPERATED I N A COMMERCIAL ENVIRONMENT. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY A ND I F NOT INSTALLED AND USED I N ACCORDANCE W ITH THE
INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS. OPERATION O F THIS EQUIPMENT IN A RESIDENTIAL
AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE
USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN
EXPENSE.
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY
THE PARTY RESPONSIBLE F OR COMPLIANCE COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL EQUIPMENT COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME
NMB-003 DU CANADA.
WARNING
THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS
PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER
MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.
CE Compliance Statement

6
Important Safeguards
• Readtheseinstructions.
• Heedallwarnings.
• Followallinstructions.
• Donotusethisequipmentnearwater.
• Cleanonlywithdrycloth.
• Donotblockanyventilationopenings.Installinaccordancewiththemanufacturer’s
instructions.
• Donotinstallnearanyheatsourcessuchasradiators,heatregisters,stoves,orother
equipment(includingampliers)thatproduceheat.
• Donotdefeatthesafetypurposeofthepolarizedorgrounding-typeplug.Apolarized
plughastwobladeswithonewiderthantheother.Agroundingtypeplughastwoblades
andathirdgroundingprong.Thewidebladeorthethirdprongisprovidedforyour
safety.Iftheprovidedplugdoesnottintoyouroutlet,consultanelectricianforreplace-
mentoftheobsoleteoutlet.
• Protectthepowercordfrombeingwalkedonorpinched,particularlyatplugs,conve-
niencereceptacles,andthepointwheretheyexitfromtheequipment.
• Onlyuseattachments/accessoriesspeciedbythemanufacturer.
• Unplugthisequipmentduringlightningstormsorwhenunusedforlongperiodsoftime.
• Referallservicingtoqualiedservicepersonnel.Servicingisrequiredwhentheequip-
menthasbeendamagedinanyway,suchaspower-supplycordorplugisdamaged,
liquidhasbeenspilledorobjectshavefallenintotheequipment,theequipmenthas
beenexposedtorainormoisture,doesnotoperatenormally,orhasbeendropped.
• CAUTION-THISMANUALISFORUSEBYQUALIFIEDSERVICEPERSONNELONLY.TORE-
DUCETHERISKOFELECTRICSHOCKDONOTPERFORMANYSERVICINGOTHERTHAN
THATCONTAINEDINTHEOPERATINGINSTRUCTIONSUNLESSYOUAREQUALIFIEDTO
DOSO.
• UseCertied/ListedClass2powersupplytransformeronly.

7
Disclaimer ................................................................3
Warning and Caution........................................................4
FCC & CE Compliance Statement ..............................................5
Important Safeguards .......................................................6
Table of Contents...........................................................7
1. Introduction
About this Manual .......................................................9
Key Features ...........................................................9
Content Verication.....................................................10
Camera Dimensions.....................................................10
2. Installation and Conguration
2.1.0 Typical System Conguration ........................................11
2.1.1 Basic Conguration of EasyTrak™ PTZ Dome System.....................12
2.1.2 Connecting the EasyTrak™ PTZ Dome Directly to the DVR .................13
2.1.3 Connecting the EasyTrak™ PTZ Dome to the Controller Keyboard
via J-Box ........................................................13
2.1.4 Connecting the EasyTrack™ PTZ Dome to the EZ-Coax™..................14
2.1.5 Connecting the EasyTrak™ PTZ Dome to the DVR via J-Box ................15
2.1.6 DIP Switch Layout Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
2.1.7 EasyTrak™ PTZ Dome Camera Address (ID).............................17
2.1.8 Setting Protocols ..................................................18
2.1.9 Connections ......................................................19
2.2.0 Mounting the EasyTrak™ PTZ Dome Camera ............................21
2.2.1 Power On & Boot-Up Sequence .......................................22
3. Program & Operation
3.0 Dome Camera Selection ..............................................23
3.1 Programming the PTZ Functions
3.1.0 Function .........................................................24
3.1.1 Home Function ....................................................25
3.1.2 Preset ...........................................................26
3.1.3 Pattern...........................................................28
3.1.4 Scan ............................................................30
3.1.5 Tour .............................................................32
3.1.6 Run Function......................................................33
3.2 Programming the Alarm
3.2.0 Alarm............................................................34
Table of Contents

8
3.3 Programming the Screen Functions
3.3.0 Screen ...........................................................36
3.3.1 Language ........................................................36
3.3.2 Privacy Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3.3.3 North Direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3.3.4 Zone Title.........................................................39
3.3.5 Camera Title ......................................................40
3.3.6 OSD Display.......................................................41
3.4 Programming the Camera Functions
3.4.0 Camera ..........................................................42
3.4.1 Focus Control / 3.4.2 WB Control ......................................43
3.4.3 AE Control ........................................................45
3.4.4 Back Light .......................................................46
3.4.5 Sharpness / 3.4.6 Digital Zoom / 3.4.7 Night Shot ........................47
3.4.8 Camera Default ....................................................48
3.5 Programming the Data Functions
3.5.0 Data.............................................................49
3.5.1 Factory Default / 3.5.2 Erase Data .....................................50
3.5.3 Backup Data / 3.5.4 Restore Data .....................................51
3.5.5 Clear Data ........................................................52
3.6 Programming the Schedule Functions
3.6.0 Schedule .........................................................53
3.6.1 Action ...........................................................54
3.6.2 Action List........................................................56
3.7 Programming the Setup Functions
3.7.0 Setup / 3.7.1 Flip ..................................................57
3.7.2 Speed /3.7.3 Preset Freeze / 3.7.4 Panning Range ........................58
3.7.5 Tilt Over Angle.....................................................60
3.7.6 Calibration........................................................61
3.7.7 Password ........................................................62
3.7.8 Date/Time ........................................................64
3.7.9 System Information ................................................65
Troubleshooting Tips .......................................................66
Technical Specications ...................................................67

9
1. Introduction
ABOUT THIS MANUAL
Thank you for purchasing our EasyTrak™ PTZ speed dome camera.
Thisfull-featuredcameracomesequippedwithahighresolution1/4”Interlinetransfer
CCDImager,whichenhanceslowlightsensitivityandprovidescrystalclearpictureseven
inchallenginglightingenvironments.
Additionally,auser-friendlyon-screendisplay(OSD)menumakessetupandprograming
functionssimpleandeasy.NowequippedwithproprietaryEZ-Coax™transmission,
initialsetupandmaintenancecanbedoneeasilyandsafelyonthegroundoracentral-
izedlocation.
*Beforeinstallingandusingthiscamera,pleasereadthismanualfullyandcarefully,and
besuretokeepithandyforlateruse.
Key Features
• 1/4”CCDSensor
• 550TVLines
• 36XA/FOpticalZoomLens(3.4~122.4mm)
12XDigitalZoom(combinedtotalof432x)
• ModularDesign
• Timesyncwithupto10ScheduledActions
• Day/NightFunctionalitywithICR
• EZ-Coax™:NUVICOUp-the-CoaxTelemetryControl
• WideDynamicRange(WDR)
• MultipleProtocolSupportwithAutoDetectionandSetup
• “InstantDigitalFlip”of180°duringTiltTravel
• 360°ContinuousPan
• Download/Save/UploadPTZSettingsusingCK-1000
• Built-inPowerSurgeProtection
• PowerRequirement:24VAC(40VA)

10
1. Introduction
Content Verication
Beforeinstallingthecamera,pleasemakesurethatallofthefollowingitemsare
includedinthebox.
EasyTrak™ PTZ Dome Series
1. EasyTrak™PTZDomeCamera
2. AluminumPendantHousingw/WallMount(PendantHousingModel)
3. InstallationManual
4. MountingHardware
Available Models
• NTSC: SC-S36N-PHW(PendantHousing),SC-S36N-FMH(FlushMountHousing)
EasyTrak™ PTZ Dome Camera Dimensions
See the diagram below for the exact dimensions for the EasyTrak ™ PTZ Dome
Camera Dimensions.
UNIT: inches(mm)

11
2. Installation and Conguration
2.1.0 Typical System Conguration
Additional Controller Keyboard and a variety of external switching devices such as
Multiplexers (MUXes) and Digital Video Recorders (DVRs) may be incorporated to
accommodate the needs from a small to a large surveillance/security system.
Figure. 1 Illustrates Sample Installation Conguration.

12
2.1.1 Basic Conguration of EasyTrak™ PTZ Dome System
Figure. 2 Illustrates the Basic Installation Conguration.
2. Installation and Conguration

13
2. Installation and Conguration
2.1.2 Connecting the EasyTrak™ PTZ Dome Directly to the DVR
• Locate the RS-422 Rx+ & Rx- conductor wire from the EasyTrak™ PTZ dome.
• Connect the RS-485 Tx(+)/ Tx(-) of the DVR into Rx(+)/Rx(-) of the PTZ dome
camera.
Figure. 3 Illustrates connecting EasyTrak™ PTZ to the DVR.
2.1.3 Connecting the EasyTrak™ PTZ Dome into the Controller Keyboard via
J-box
Figure. 4 Illustrates connecting EasyTrak™ PTZ to the Controller via J-box.
Rx+
Rx-
Tx+ Tx-
IN OUT
SLAVE
+-+-+-
1 DOME 2 RS-232C
ALARM / DVR
DVR
DATA 1
DATA 1
REAR
DOME 1
+++---
DOME 2 DVR
Rx+
Rx-
ComPort
(Located at the back
of DVR)

14
2. Installation and Conguration
Figure. 5 Illustrates connecting EasyTrak™ PTZ to the EZ-Coax™ Transceiver.
UseminimumofAC24V/40VApowersource.
• ConnecttheVIDEO-OUTjacktotheVIDEO-INPUTofthedevice.
• Astheconnectingmethodvarieswiththeequipment,refertothemanualsupplied
withtheequipment.
• Alwaysmakesurethatthecamera’spowerisoffwhenconnectingthecables.
• Thecameraissuppliedwithsecondvideooutputonthecamerahousing.Tousethis
featurealongwithaservicemonitor,secondmonitorcableisrequired.
UsingaRS-485communication,itwillbeabletocontroltheZOOM/FOCUSandOSD
menufromthecontrollerorthroughtheDVR.RS-485doesnotallowstarconnection
layout.Itmustbeinadaisy-chainconguration.Anamplier/repeaterisrequiredto
extendover1.2kmindistance.
2.1.4 Connecting the EasyTrak™ PTZ Dome to the EZ-Coax™
KEYBOARD CONTROLLER
(FIGURE1:SW2 #1 is ON)
(FIGURE1: SW2 #1 is OFF)
EZ-Coax™BNCConnection
RS-485Connection

15
2. Installation and Conguration
2.1.5 Connecting the EasyTrak™ PTZ Dome to the DVR via J-box
Figure. 6 Illustrates connecting EasyTrak™ PTZ dome & DVR into the Controller
Keyboard.
DOME 1
+++---
DOME 2 DVR
Tx+ Tx- Rx+ Rx-
IN OUT
SLAVE
+-+-+-
1 DOME 2 RS-232C
ALARM / DVR
DVR
DATA 1
DATA 1
REAR
Rx+
Rx-
ComPort
(Located at the back
of DVR)

16
2. Installation and Conguration
2.1.6 DIP Switch Layout Diagram
EasyTrak™ PTZ dome camera must be installed by a qualied service personnel
only.
Before installing this camera system, Instruction Manual must be read thoroughly
and fully understood. This setup procedure involves proper setting of the congu-
ration switches indicated below.
Figure. 7 Indicates layout of the conguration switches.
CPUBoard
(Located under the
dome camera)
ConnectorBoard
(Located at the base of the
camera housing enclosure)

17
2.1.7 EasyTrak™ PTZ Dome Camera Address (ID)
EachEasyTrak™PTZdomecameramusthaveauniqueaddress(ID).IdenticalIDsonthe
samelinemaydamagethecontrolcircuitcausedbyanelectricalshort.Wheninstall-
ingmultiplecamerasoraDVR,itisrecommendedthatcamerasID’sbeidenticaltothe
cameraportoftheDVR.
CamPort1=DomeID1,CamPort2=DomeID2...CamPort16=DomeID16.
Ifmorethan16PTZcamerasareinstalledusingtwoormoreDVRsthefollowingformula
isusedfultodeterminetheDomeID:ID=16x(n-1)+m(Wheren=numberofDVR,m=
CameraPort)
Refer to Figure. 8 for setting the EasyTrak™ PTZ dome camera address (ID) and
protocol selection.
2. Installation and Conguration
. .
99
100 10
0
.
1
9
.
999
001
DOME ID
10
100/10/1:Indicatesthedigit
placementoftheDomeIDnumber.
The‘100’dialdeterminesthe100th
digitnumber.Ifsetto‘9,’theDome
IDwouldbe900.The‘10’dial
determinesthe10thdigitnumber,
andthe‘1’beingthelastnumberof
thecameraID.

18
2. Installation and Conguration
2.1.8 Setting Protocols
EasyTrak™PTZdomecameraiscapableofsupportingmultipleprotocolsifthecom-
municationspeedismatched(samebaudratei.e.,9600bps).AllEasyTrak™PTZdome
cameracomeswith‘AutoDetection’asfactorydefaultforoptimalperformance.
Note:ConsultservicepersonnelifthePTZdomecameraisinstalledwithadeviceother
thanarecommendedPTZcameracontroller.
Figure. 9 Illustrates the Protocol Selection Tables

19
2. Installation and Conguration
2.1.9 Connections
• How to Connect to RS-485
TheEasyTrak™PTZdomecamerahasbuilt-inRS-485receiversothatitcanbecon-
trolledremotelybyanexternalcontroldevicesuchasaControllerKeyboardoraDVR.
RS-485:ConnecttheTXA(Tx+)andTXB(Tx-)oftheRS-485controldevices(KBD,
DVR...)toTRX+,TRX-ofthedomecamera.
RS-485doesnotallowforastarconnectionlayout.ASplitterisrequiredifastarcon-
nectionlayoutisdesired.RS-485guarantees1.2Kmofdatalinerouting.ARepeateris
recommendedtoextendover1.2Km.
• Connecting the Video Output
RefertoFigure.2-BasicInstallationDiagram
• Connecting the Alarms
AL1 to 8 (Alarm In)
Magnetic,PIRorotherexternalsensordevicescanbeusedtosignalthePTZcamera
reactingtoanevent.RefertoChapter3.2-ProgramandOperationforconguring
alarminput.
GND (Ground)
Note:AlltheconnectorsmarkedGNDarecommon.
ConnectthegroundoftheAlarminputand(or)theAlarmOutputtotheGNDconnector.

20
2. Installation and Conguration
2.1.9 Connections (Continued)
• NO / NC (Normally Opened or Normally Closed dry contact relay output)
EasyTrak™PTZdomecameracanactivateexternaldevicessuchasbuzzersorlights
usingdrycontactrelays.ConnectthedevicetotheNO(NC)(AlarmOut)andCOM
(Common)connectors.SeeChapter3-ProgramandOperationforconguringalarm
output.
• Connecting the Power
ConnecttheAC24V40VApowertothecamera.Usecertied/ListedClass2power
supplytransformeronly.