nuVita 3032 User manual
Digital video baby monitor
EN
3032
INTRODUCTION
Thank you for purchasing the product. Now you can see and hear your baby sleeping in the
other room or you can monitor your older children in their playroom.
This User’s Guide provides you with all the information you need to get the most from your
product.
Before you can use the baby monitor, we recommend you insert and fully charge the battery
in the parent unit, so that it continues to work if you disconnect it from the mains power to
carry it to another location. Please read the Safety Instructions on the Page 6 before you install
the units.
OVERVIEW OF YOUR PARENT UNIT
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Power key
Power adapter connector
LCD display
Microphone
Power/Signal indicating LED
Charging indicating LED
VOX key
Music play ON/OFF key
PTT key
Speaker
OK/Menu key
Return key
Volume + / Up
Volume - / Down
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Light sensor
Camera lens
Power indicating LED
Microphone
Infrared LED
Power key
Power adapter connector
Temperature sensor
Pair key
Speaker
OVERVIEW OF YOUR BABY UNIT
GOT EVERYTHING?
1 x Parent Unit 1 x Baby Unit 2 x Power adapter
3032
Instruction Manual
1 SAFETY INSTRUCTIONS
WARNING
This baby monitor is compliant with all relevant standards regarding electromagnetic elds
and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the
instructions in this User’s Guide carefully before suing the device.
Adult assembly is required. Keep small parts
away from the children when assembling.
This product is not a toy. Do not allow
children to play with it.
This baby monitor is not a substitute for
responsible adult supervision.
Do not place the baby unit or cables in the
cot or within arm’s reach of the baby (at least
1 meter away).
•
•
•
•
Keep the cords out of reach of children.
Do not use the baby monitor near water or
a heat source.
Only use the power adapters provided.
Do not touch the plug contacts with sharp
or metal objects.
•
•
•
•
2 GETTING STARTED
3 USING THE BABY MONITOR
2.1 BABY UNIT POWER SUPPLY
3.1 SETTING UP
2.2 PARENT UNIT POWER SUPPLY
1.
2.
3.
Connect the plug of the power adapter to
the parent unit and the other end to the
main socket
Note: Only use the power adapter
provided.
The charging LED will illuminate, meaning
start charging the battery.
Push the power key to ON side to turn on
the parent unit.
4 MONITORING SCREEN
1.
2.
3.
4.
5.
6.
7.
8.
Signal strength indicator
Temperature of the baby’s room
Lullaby is playing
VOX function activated
Alarm activated
Battery indicator
PPT function activated
Date and time (HH:MM AM/PM DD/MM)
Charging the parent unit fully before use is
recommended.
It will allow the unit to operate on the battery
in the event of a power failure.
Place the baby unit in a convenient location
(e.g. on a table) and point the camera lens
towards the area you want to monitor. Adjust
the baby unit until you are satised with the
image in the parent unit.
Note: Do not place the baby unit within
baby’s reach! If there is interference on the
picture or sound, try moving the units to
dierent locations, and ensure they are not
close to other electrical equipment.
3.2 PAIRING CAMERA
The enclosed baby unit has already been registered. You do not need to register again unless
the baby unit loses its link with the parent unit. See section 5.2 CAMERA REGISTRATION for
more details.
3.3 VOX FUNCTIONS
Press VOX Key will turn on VOX mode. The VOX mode automatically puts the display in sleep
mode to save battery. It reactivates automatically, when it detects noise in the baby’s room.
3.4 MUSIC PLAY
Press music key will turn on the music player and play lullaby through the baby unit; press music
key again will turn o it.
3.5 TALK FUNCTION
Press and hold PTT key on the parent unit to talk to your baby through the baby unit
loudspeaker. The symbol will be displayed at the bottom of the screen.
3.6 ADJUSTING THE VOLUME
When the video is playing mode, press Volume – key to decrease volume; or Volume + key to
increase volume. The display will show the current volume for 5 seconds.
1.
2.
Connect the small plug of the power
adapter to the baby unit and the other end
to the main socket.
Note: Only use the power adapter
provided.
A blue light LED will display and indicate
the baby unit is working.
5 MENU OPTIONS
1.
2.
3.
4.
5.
6.
Camera
Alarm
Settings
VOX
Languages
System info
5.1 MAIN MENU
Press‘OK/Menu’ Key at monitoring screen will
enter the main menu, it contains 6 items:
You can press the ‘Left’ Key or ‘Right Key’ to
move the cursor to select an item and press
‘Menu’key will enter the sub-menu which you
selected.
Press‘Return’key will be back to the
monitoring screen.
5.2 CAMERA REGISTRATION
Press‘OK/Menu’ key to enter registering
screen, then push the pair key on the back of
baby unit within 10 seconds.
5.3 ALARM
Press ’PPT’ key to move the cursor and ‘up/
down’key to change value
5.4.1 Time and Date
5.4 SETTINGS
Press‘PPT’key to move the cursor and‘Up/
Down’ key to change value.
There contains 2 items in this menu:
Set time/date
Set format
5.4.2 Temperature unit
Switch the unit to Celsius or Fahrenheit
5.4.3 Anti-icker
You are able to adjust the frequency of 50/60
Hz to suit your lighting for anti-icker.
5.4.4 LCD backlight
You are able to adjust the brightness of the
LCD. You are viewing and the LCD backlight
active time in menu operation.
5.5 VOX
5.5.1 System mode
This menu allows you to choose the working
mode from the following: Normal mode/VOX
mode.
5.5.2 VOX sensitivity
Switch the VOX sensitivity at Low/Medium/
High level.
5.6 LANGUAGE
Language setting menu allows you to choose
your language from the following:
•
•
•
•
English
French
Spainish
Portuguese
•
•
•
•
Italian
German
Turkey
Russian
5.7 SYSTEM INFORMATION
There contains system information such as
Project ID, Hardware version, software version,
build date etc.
6 TECHNICAL FEATURES
•
•
•
•
•
Frequency: 2.4GHz digital
Modulation mode: GFSK
Operating temperature: -10 to +45°C
Operating Humidity: <85%
Range: 260m in open eld
•
•
•
•
LCD: 3.2-inch TFT LCD
Resolution: 320 x 240 @20fps
Battery: Li-polymer
750mAh
Dimensions(W x H x D): 120 x 70 x 17 mm
6.1 MONITOR
•
•
•
•
•
•
Sensor: 0.3Mega pix CMOS
Minimum illumination: 0Lux (IR on)
Night vision distance: 15ft (5m)
Lighting sensor
Temperature sensor
Dimensions (W x H x D): 67 x 106 x 67 mm
6.2 CAMERA
7 WARRANTY
TERMS AND CONDITIONS
The product is guaranteed 24 months (legal guarantee)
against defects in materials or manufacturing starting
from the date stated in the receipt. Excluded from the
legal guarantee of 24 months are the parties identied
as “consumable”(e.g., batteries, brush heads or parts
subject to wear).
The legal guarantee of 24 months is void if:
1.
2.
3.
The product has undergone aesthetic damage due
to improper use not in accordance with instructions
in the manual.
This product has been modied and/or tampered
with.
The cause of the failure was due to poor
maintenance of the individual components and/or
accessories and/or supplies (e.g. oxidation and/or
scaling due to the retention of water or other liquids,
sediment blocking the sensor, leak of corrosive liquid
from batteries.)
The following is excluded from the legal guarantee of
24 months:
1.
2.
3.
4.
5.
Costs related to replacements and/or repair of parts
subject to wear or costs for ordinary maintenance of
the product.
The costs and risks involved in transporting the
product to and from the store where you purchased
or otherwise authorized collection centre to receive
the products under warranty.
Damage caused by or resulting from improper
installation or improper use not in accordance with
the directions in the instruction manual.
Damage due to natural disasters, accidental events
or adverse conditions not compatible with the
product.
Defects that have a negligible eect on product
performance.
The manufacturer, distributor and all the parties
involved in the sale do not assume any liability for
losses and economic damage from any malfunction of
the product. In accordance with current regulations the
manufacturer, distributor and all the parties involved
in the sale are not responding in any case for damages,
including direct, indirect ones, loss of net income, loss
of savings and additional damage and other details
consequences going beyond the damage caused by the
breach of warranty, contract, strict liability, wrongdoing
or due to other causes, resulting from the use or
inability to use the product and/or paper and electronic
documents, including the lack of service.
Other nuVita Baby Monitor manuals
