nuVita Audiovoice 1098 User manual

Menu Key ( )
NUVITA AUDIOVOICE 1098
EN
WARNING!
STRANGULATION HAZARD - Keep the adapter cord out of baby’s reach
IMPORTANT SAFETY INSTRUCTIONS
WARNING
CAUTION!
This baby monitor is not designed to replace responsibility of human supervision
on children.
This baby monitor must be assembled and installed by an adult.
This product is designed for indoor use.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Clean only with dry cloth.
Do not use this baby monitor near water.
Do not install this baby monitor near a heat source.
Do not cover the baby monitor with a towel or blanket.
Unplug this apparatus during lightning storms or when unused for long periods
of time.
The small parts of this baby monitor can be swallowed by babies or small
children.
Keep these parts out of reach of children.
Do not touch the plug contacts with sharp or metal objects.
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
Only use the power adapters provided. Do not use other charges or power
adapters as this may damage the device and battery pack.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Never place camera or cords within the cot/crib
The baby unit and cables should be at least 3 ft/1 m away from children
Secure the cord to the wall to keep cord away from the baby’s reach
Never use extension cords with AC adapters. Only use the AC adapters
provided
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PRODUCT AND ACCESSORIES
CONTENTS
Baby unit x1
Parent unit x1
Rechargeable Lithium battery x1
Power adapter for the baby unit x1
(Longer cable one)
Power adapter for the parent unit x1
(shorter cable one)
Screws and extension bolt x2 to mount
baby unit on the wall.
User’s guide x1
OVERVIEW OF THE BABY UNIT
01. Camera lens
05. Speaker
04. Antenna
03. Microphone
02. Photo sensor (Night Vision on/o)
06. On/O Switch
07. Power adapter connector
08. Power Led
09. Pairing key (for service center use only)
•
•
•
•
•
•
•
OVERVIEW OF THE PARENT UNIT
mode NORMAL mode ZOOM IN mode MENU
1
Press to enter/exit
menu
right arrow to move
image to the right
2
press and hold to speak to
your baby
le arrow to move
image to the le
3
4
5
6
7
8
press to zoom in 2X, press again
to go back to 1X
to switch between
menu items
9
Adjust audio level
louder
up arrow to move
image to the top
to switch between
menu items
10
Adjust audio level
lower
down arrow to move
image to the boom
to switch between
menu items
11
Display (LCD)
VOX Mode LED (green Led)
Speaker
Microphone
Belt clip
Power LED (Power on = steady green; Power low = ashing red)
Talk Key ( )
Zoom key ( )
Volume up ( )
Volume down ( )
13
14
15
16
Baery Cover
Audio level LEDs (blue LEDs)
Power adapter connector
Power On/O switch ( )
(Press and hold to turn on/o parent units)
12 Stand
SIGNIFICATO DELLE ICONE DEL MENU NELL’UNITÀ GENITORE
Battery level (3 levels plus ashing of battery low)
Signal strength (4 levels)
Talk mode
Night vision mode (Image becomes black/white)
VOX mode (Baby and parent unit are in sleep mode while baby sleeps.
Baby and parent unit will start streaming video and audio when baby cries)
Trigger sensitivity level (3 levels)
Brightness level (5 levels)
Out of range/Lost link alert
Auto mute on/o. Switch auto mute“on”, parent unit enters audio mute mode
automatically when baby does not make much noise. Parent unit starts to
stream audio when baby’s sound level exceeds preset sensitivity level
PLUG IN BABY UNIT POWER ADAPTER
PLUG IN BABY UNIT POWER ADAPTER
• Make sure to use provided (6V 800mA) power adapter, the longer cable one.
•Slide the switch to On position to turn on baby unit. Green power LED is turned on.
GETTING STARTED
Make sure to use provided (6V 800mA) power adapter, the shorter cable one.
Plug in adapter to parent unit to charge parent unit for at least 4 hours before using
the parent unit for the rst time.
Press and hold power On/O key for 2 seconds to turn on parent unit.
Once the baby and parent units are switched on, the display on the parent unit will
show the video captured by the baby unit.
If there is no connection or you are out of range, the video display will go o and
the Lost Link signal will be shown on the LCD display with beep sounds every 3
seconds. Move the parent unit closer to the baby unit until the link is re-established.
OPERATION ON RECHARGEABLE BATTERIES
The parent unit comes with a rechargeable Li-ion polymer rechargeable
battery.
The battery symbol ashes and power LED ash red when battery is empty.
If the battery is completely empty, the parent unit automatically switches o
and loses contact with the baby unit.
The rechargeable battery is inside of the parent unit. If you need replacement
of battery when battery has reached end of life, please follow the following
steps:
Slide open battery compartment lid to remove it.
Insert the rechargeable battery with cable alignment
as shown in gure.
Reattach the lid.
•
•
•
Charging normally takes 2.5 hours, but it takes longer when the parent unit
is switched on during charging. To keep charging time as short as possible,
switch o the parent unit during charging.
When the rechargeable battery is fully charged, the parent unit can be used
approximately 10 hours if the parent unit is on VOX mode.
•
•

Press Volume up key to increase volume on parent unit.
Press Volume down key to decrease volume on parent unit.
There are 8 levels for volume level adjustment. When volume level equals to 0,
Parent unit is muted.
VOX mode is designed to reduce RF emission when baby is not crying. This
mode also saves the battery life of parent unit. If you select VOX mode on,
please also select the desired level of activation sensitivity to activate baby
and parent unit when baby needs help.
Press menu key to enter Menu mode
Default setting is VOX O
Select VOX icon then press zoom key to select/de-select VOX mode
VOX mode LED blinks green when VOX mode is selected
When the baby unit detects a sound, the video display on the parent unit
automatically goes on to show the baby. When no new sound is detected for
30 seconds, the video display goes out again.
•
•
•
•
•
•
•
•
•
•
•
SETTING UP
Using the Baby monitor
Place the baby unit in a
convenient location where the
camera will provide the best view
of your baby in their cot/crib.
Place the baby unit on a at
surface.
For optimal sound detection,
place
the baby unit at least 1 meter (3.5
feet) away from your baby, but no
further than 2 meters (7 feet)
away.
Mount the baby unit to the wall
as shown in the gure with the
screws supplied.
Adjust the baby unit’s head by
rotating the camera up, down, left and right.
Do not place the baby unit within baby’s reach. If the signal is weak, try
moving the parent and/or the baby unit to dierent positions in the rooms.
NIGHT VISION MODE
The baby unit has 8 pcs infrared LEDs for picking up clear images in the dark.
When the built-in photo sensor detects a low level of ambient light, the LEDs
will automatically activate. The image on the LCD display becomes black and
white when night vision mode is activated.
TALK MODE
Press and hold the TALK key on the parent unit to talk to your baby through baby
unit’s speaker.
ADJUST SPEAKER VOLUME
VIRTUAL ZOOM IN
•
•
Press Zoom in key to zoom image to 2X. Press again to go back to
default 1X.
When parent unit is in 2X Zoom mode, you can press talk to pan to the left;
press menu to pan to the right; press volume up to tilt to the top;
press volume down to tilt to the bottom.
•
•
•
•
•
Press menu key to enter menu mode
Select brightness icon then press Zoom key to enter brightness adjustment
Press volume up key to increase brightness
Press volume down key to decrease brightness
There are 5 levels for brightness level adjustment
BRIGHTNESS ADJUSTMENT
AUTO MUTE MODE
•Auto mute mode is designed to make parent unit completely silent when baby does
not cry. Audio automatically streams again when baby’s sound exceeds the desired
activation level. If you select Auto mute mode on, please also select the desired level of
activation sensitivity to stream audio to parent unit when baby needs help.
Press menu key to enter menu mode
Default setting is Auto Mute On.
Select Auto mute icon then press zoom key to de-select/select Auto Mute mode.
•
•
•
•
VOX MODE
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ACTIVATION SENSITIVITY ADJUSTMENT
When you select VOX mode to switch o baby and parent unit, you have to
decide a desired level which will activate baby and parent unit again. You do
not want to miss the baby crying.
Press Menu key to enter menu mode
Press Zoom key to enter activation sensitivity adjustment
Press Volume up /down key to adjust sensitivity level
Low sensitivity means that the baby has to cry louder to activate the
baby unit
Medium sensitivity means that the baby makes a moderate sound to
activate baby unit
High sensitivity means that the baby makes a tiny sound to activate baby
unit
This sensitivity level is set and shared by VOX mode and Auto Mute mode
NOTE
Distance between baby and baby unit aects the sound level picked up by
baby unit. Please conrm the location of your baby unit rst, then, adjust the
sensitivity level you desire. When the distance between baby and baby unit
changes, please set the sensitivity level again.
The parent unit can be used approximately 5.5 hours if the parent unit’s
display is switched on continuously.
The battery gradually discharges, even when the parent unit is switched o.
•
•
NOTE: If the volume is set to a high level, the parent unit consumes more
power.

GARANZIA - CONDIZIONI
This product benets of a warranty of 24 months on material and
manufacturing defects, starting
from the date of purchase (see sales slip).
The warranty of 24 months does not include damages caused by the usual use
of parties identied
as “consumable”(e.g., batteries, brush heads or parts subject to usury).
The legal guarantee of 24 months is void if:
The product has undergone aesthetic damage due to improper use not in
accordance with
instructions in the manual
This product has been modied and/or tampered with
The cause of the failure was due to poor maintenance of the individual
components and/or
accessories and/or supplies (e.g. oxidation and/or scaling due to the retention
of water or other
liquids, sediment blocking the sensor, leak of corrosive liquid from batteries)
•
•
•
•
•
DISPOSAL OF THE DEVICE
The symbol on this product means that it is an electronic product
and follows the European directive 2002/96/CE whereby electronic
products have to be disposed of at your local recycling centre for
safe treatment.
•
•
•
INTERFERENZE
HELP
If the signal is weak, try moving the parent and/or baby unit to dierent
positions in the rooms.
Use of other 2.4Ghz devices, such as WIFI router, Bluetooth products or micro-
wave ovens may cause interference with this baby monitor. Please put this
baby monitor at least 1 meter(4 feet) from these wireless devices.
Close proximity of the baby and parent unit will causes echo and audio
feedback. Please keep baby unit and parent 2 meters (8 feet) apart from each
other.
•
•
NO VIDEO
Running out of battery? Charge parent unit again. Make sure Baby unit power
LED is turned on.
VOX mode? Check whether VOX mode LED is turned on. Press any button to
activate baby monitor or select VOX mode o from menu.
•
•
•
•
NO AUDIO
•Running out of battery? Charge parent unit again. Make sure Baby unit
power LED is turned on.
•VOX mode? Check whether VOX mode LED is turned on. Press any button to
activate baby monitor or select VOX mode o from menu.
•Auto mute mode? If Auto Mute is selected“On”, Parent unit will stream audio
when baby’s sound exceeds selected sensitivity level. Switch Auto Mute o or
select sensitivity level to your desired one.
•Pressing Talk Key. When you press Talk Key, you can speak to your baby.
Release the Talk key and you can hear baby’s voice again.
EC DECLARATION OF CONFORMITY
This product complies with European directives and safety
standards.
A copy of the Declaration of Conformity can be found on our
website www.nuvitababy.com
The manufacturer, distributor and all the parties involved in the sale do not
assume any liability
for losses and economic damage from any malfunction of the product. In
accordance with current
regulations the manufacturer, distributor and all the parties involved in the sale
are not responding
in any case for damages, including direct, indirect ones, loss of net income, loss
of savings and
additional damage and other details consequences going beyond the damage
caused by the
breach of warranty, contract, strict liability, wrongdoing or due to other causes,
resulting from the
use or inability to use the product and / or paper and electronic documents,
including the lack of
service.
For further information on the help service visit the website
www.nuvitababy.com
The following is excluded from the legal guarantee of 24 months:
where you purchased or otherwise authorized collection centre to receive
the products under warranty
Damage caused by or resulting from improper installation or improper use
not in accordance with the directions in the instruction manual
Damage due to natural disasters, accidental events or adverse conditions not
compatible with the product
Defects that have a negligible eect on product performance
Costs related to replacements and/or repair of parts subject to wear or costs
for ordinary maintenance of the product
The costs and risks involved in transporting the product to and from the store
•
•
•