NUVU ASMP-36 User manual

Food Service Systems
NU-VU®Roll-In RackProofer
®
Project
Item
Quantity
®NU-VU®Food Service Systems
www.nu-vu.com
5600 13th Street
Menominee, MI 49858
1-800-338-9886 Toll Free
1-906-863-4401 Phone
1-906-863-5889 Fax
ASMP-36 Roll-In Rack Proofer
NU-VU®ASMP-36 Roll-In Rack Proofer
STANDARD FEATURES:
•Stainless steel construction
•Solid doors
•Solid state controls
•AutoMist humidity system
•Magnetic Handles
OPTIONAL FEATURES:
•Stainless steel roll-in rack (20-1115)
SIZE:
ASMP-36 - 89-1/8” High, 61-7/8” Wide, 37-1/8” Deep
2264 mm High, 1572 mm Wide, 943 mm Deep
NU-VU’s ASMP-36 roll-in rack proofer features
heavy-duty stainless steel construction, with solid
doors. These units also feature the AutoMist
humidity system. While these units do not come
standard with a roll-in rack, they are available as
an accessory item.
CONSTRUCTION:
•Welded stainless steel
•Fully insulated
•Control panel accessible through front and
top of unit
•Heating elements accessible inside of cabinet
and through top
CONTROLS:
•Solid state controls
•Indicator light for thermostat
•Separate heat and humidity controls
•60 minute timer

®NU-VU®Food Service Systems
www.nu-vu.com
5600 13th Street
Menominee, MI 49858
1-800-338-9886 Toll Free
1-906-863-4401 Phone
1-906-863-5889 Fax
®Food Service Systems
Approval / Stamp
ASMP-36 Roll-In Rack Proofer
NU-VU®ASMP-36 Roll-In Rack Proofer
SPECIFICATIONS:
ELECTRICAL:
SERVICE CONNECTIONS:
• Unit is shipped from factory to be hard wired on site.
Single phase uses three-wire system. Three phase
uses four-wire system
• 208 or 240 Volt single phase is standard.
Please specify at time of order.
•A
1/4” waterline is required. A water softening system
should be used to minimize mineral build-up.
INSTALLATION:
Allow four inches on each side and back of unit for
ventilation of oven.
DOOR SWING: Proofer - 31-1/2” (800 mm)
PACKING SIZE:
83” High, 60” Wide, 38” Deep
(2108 mm High, 1524 mm Wide, 965 mm Deep)
SHIPPING WEIGHT:
1000 Pounds (454 Kg), FOB Menominee, MI 49858
DIMENSIONS:
Height Width Depth
Exterior 89-1/8” 61-7/8” 37-1/8”
Interior 75-5/8” 24” 32-3/4”
Per Side
Amp Draw 208/1 208/3 240/1 240/3
22 20 19 17
ELECTRICAL:
CAPACITY:
18”x26” 13”x18”
Sheet Pans Sheet Pans Spacing
Proofer 36 72 n/a
617/8”371/8”
891/8”
FRONTTOP SIDE BACK
WATER INLET
1/4” COMPRESSION ELECTRICAL
INLET