NVA HP25 User manual

© Nättraby Verktygs AB
HP25
NVA anual Press
for plastic foil
HP25 is a manual press, ideal for
compacting plastic foil.
The press ram is automatically locked in its
down position, keeping the material under
pressure.
• Easy to use for all members of staff
• anual press - no electrical power required
• Less than 0,5 m2 floor space is needed
• Its press ram goes far down into the
chamber, giving compact bales
• Bale weight 1 5-25 kg, that can easily be
carried away
• Bale size allows four bales on a EUR-pallet
• Efficient collecting of plastic material
minimizes internal transport costs
• Low consumption cost per kg of plastic
gives low operating cost
HP25 is easy to use and relocate where it is needed the most.
The press ram is released by a quick hand
grip.
Load the material into the chamber and
push the press ram down.

© Nättraby Verktygs AB - HP25 201 5091 8
NÄTTRABY VERKTYGS AB
Angelskogsvägen 8, SE – 372 38 RONNEBY
Tel. [phone] - Fax [phone]
www.nva.se - [e-mail]
SWEDEN
Two bale strapping rolls are placed on top
of press ram.
Since the mid-sixties more than 15,000
NVA balers have been delivered all over
the world.
We are proud to be certified
since 1996 according to ISO
9000 quality system.
This shows our commitment
to continous improvements
and good quality.
HP25 anual Press
- no waste of space -
odel Weight Feed opening Bale size mm Bale weight
kg mm Length Width Height kg
HP25 89 555 x 545 555 545 500-650 1 5-25
Please contact us for more information of other products!
We reserve the right to introduce technical alterations.
The band is pulled down along the
chamber floor and attached at the front.