© 2018 nVent
- 10 - 89115007
WARRANTY
nVent Equipment Protection warrants that the Goods manufactured by nVent Equipment
Protection will be free from defects in material and workmanship for a period of one (1) year
from the date of shipment by nVent Equipment Protection, subject to the following conditions
and exclusions:
A. Conditions. All Goods must be installed and operated according to the following
specications:
1. Maximum voltage variation no greater than plus or minus 10% of nameplate
nominalrating;
2. Maximum frequency variation no greater than plus or minus 3 Hz of nameplate
nominalrating;
3. Must not exceed minimum and maximum stated temperatures on the nameplate;
4. Must not exceed (BTU/Hr) rating, including any heat sink as indicated on the nameplate;
5. Refrigerant bearing Goods must not be restarted for a period of one (1) minute after
intentional or accidental shut-off;
6. The lters (if applicable) must be cleaned regularly;
7. The Goods and any parts thereof must not be modied, unless prior written
authorization is received from nVent Equipment Protection; and
8. All Goods must be installed and grounded in accordance with all relevant electrical and
safety codes, as well as the National Electric Code and OSHA rules and regulations.
9. All Goods must be installed in a stationery application, free of vibration.
A violation of any one of these conditions shall render the warranty hereunder void and of
noeffect.
B. Exclusions. This warranty shall be void if product is misapplied in any way or:
1. Buyer specied product is inappropriate for system or environment in which it is
operating.
2. Goods are not installed in accordance with nVent Equipment Protection specications.
3. Removal or modication of nVent Equipment Protection label axed to product without
written nVent Equipment Protection approval.
nVent Equipment Protection must be notied of a claim in writing not later than fourteen (14)
days from the date when Buyer has become aware of such occurrence, or where the defect is
such that it may cause damage, immediately, such notice containing a description of how the
defect manifests itself. Failure to provide such prompt notice to nVent Equipment Protection
shall result in forfeiture of Buyer’s rights under this warranty.
In the event of a warranty claim, Buyer is to return defective goods to nVent Equipment
Protection in accordance with nVent Equipment Protection Return Policy. Warranty period
for repaired goods remains at 1 year from shipment of original goods. nVent Equipment
Protection sole obligation to Buyer under this warranty will be, at nVent Equipment
Protectionoption:
C. Repair or replace nVent Equipment Protection products or parts found to be defective in
material or workmanship.
D. Issue credit for the purchase price paid by Buyer relating to such defective Goods or part.
THIS WARRANTY CONSTITUTES THE ENTIRE WARRANTY WITH RESPECT TO THE
GOODS AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
RETURN AND REPAIR POLICY
nVent Equipment Protection products that: (i) are made to order, (ii) have been modied
by Buyer, (ii) have special nishes, or (iv) are determined by nVent Equipment Protection to
constitute “custom” products that cannot be returned to stock or resold to other Buyers, will
not be accepted for return by nVent Equipment Protection.
All returns require a Return Material Authorization number (RMA #), regardless of reason for
return, whether it be for warranty or out of warranty repair. Returns without an RMA # will be
refused by our Receiving Department. An RMA # is valid for 30 days.
