NVIS nVisor ST50 User manual

Included in the Box
• nVisorST50
• UniversalPowerSupply
• PowerCable
• DVItoHDMIAdapters
• CleaningKit
• SetupGuide
Tightenknobsonhead-tting
systembeforeplacingnVisor
inbox.
Placehead-mounteddisplay
inanti-staticplasticbag
beforewrappingcables.
1 HDMI Cables
2 Microphone Cable
3 Headphone Cable
4 USB Cable
5 Universal Power Supply
1 Accessories
2 Coiled HMD Cables
3 nVisor ST50
PIN 103796 Rev B, CR-1076
1
3
2
3
2
1
4
51
PackageContents Connections
nVisor ST50
SetupGuide
AboutthenVisorST50
ThenVisorST50Head-MountedDisplaysupportsbothsee-thruandimmersive
modes for professional augmented and virtual reality applications. HDMI
cablesfromtheHMDplugdirectlyintotheDVIorHDMIimagesourcewithno
additionalvideoprocessingelectronics.Stereo headphones and programma-
blebuttonscomplimentthehigh-resolutiondisplaystoprovidetherich,high-
delity, immersive experience required in the most demanding training and
simulationapplications.
Care&Maintenance
Protect the cables.
Donotpullorbendthepowercableorsignalcable.Donotplaceanyheavy
objectsonthesecables.Todisconnectthepowercableorsignalcable,always
pullfromtheplug,notthecable.
Use original NVIS packaging when shipping products.
NVISproductsuseprecision-engineeredopticalandmechanicalcomponents
thatcanbedamagedifnotadequatelyprotectedduringshipment.
Use only pure isopropyl alcohol and professional lens cleaning paper.
Asamplecleaningkitisprovidedwithyourunit.
Use screen savers.
TheST50OLEDmicrodisplaysaresubjecttoimageretention.Screensavers
mustbeusedtopreventstaticimagesfromlastinglongerthan2minutes.
ImageretentionisnotcoveredbytheNVISProductWarranty.

Step-by-Step
PIN 103796 Rev B, CR-1076
1 Plug the ST50 universal power supply into a standard 110-240 VAC outlet.
2 Connect one or both HDMI adapters to a PC graphics card, using the DVI to HDMI
adapters if needed. A single connection clones the image to both eyes. Use both
connectors for stereoscopic applications
3 Connect the headphone and microphone plugs to the PC.
4 Connect the USB cable to the PC.
5 Press and hold the POWER button for 2 seconds.
6 L and R video LEDs illuminate when correct format is supplied to left and right
channels, respectively.
TrackerMount
1 Top Adjustment Knob Raises and lowers HMD to align with eyes
2 Interpupillary Distance Adjustment Turn knobs to independently adjust distance between oculars
3 Back Adjustment Knob Tightens headstrap to t head size
4 Power Button Powers on/o the device
5 Brightness Button Cycles through 3 dierent levels of brightness
6 USB Buttons Programmable interaction using the USB interface
1 Existing hole spacing accommodates
the InertiaCube orientation sensors.
Other trackers can be mounted via
custom plate or adhesive.
Consult manufacturer documentation for
optimal motion tracking hardware setup
and conguration.
1
1
2
2
3
4
5
6
3
145
6
2
OperatingNotes CustomerSupport
Online
www.nvisinc.com
E-mail
[e-mail]
Phone
[phone]
Power to ST50 must be turned on only after computer (IG) is completely
booted up.
ST50 is equipped with an accelerometer to turn o the displays when the
device is stationary for 2 minutes. Timeout duration and sensitivity may be
adjusted in NVIS Uni Software.
Full product specication, software, and documentation is available at
www.nvisinc.com.
ST50 is intended for use in standard oce environments and is not designed
for outdoor or harsh environmental conditions.
RMA Instructions
AllproductreturnsmustincludeaCase
number. Customers can request a Case
number online, via e-mail, or by calling
NVISandselectingthetechnicalsupport
menu option. Please keep original
package materials for return shipments
to NVIS. Follow the diagram in the
Packing Contents section of this guide.
Pleasedonotincludeanyaccessories.
Adjustments