NXP Semiconductors LFSTBEB7361 User manual

LFSTBEB7361 Quick Start Guide
SENSOR TOOLBOX
Accelerometer Development Board
Unpack the board.
Verify package contents
according to the kit Web
site: www.freescale.com/
sensortoolbox
Assemble the hardware by connecting
a development board to the interface
board. This board is intended for use
with an Accelerometer Interface Board,
purchased separately. More information
can be found on the Web site.
At www.freescale.com/
sensortoolbox download
the latest software version by
clicking the link.
All Sensor Toolbox kits use the same
software and driver, so the install only
needs to be done once. Follow the
on-screen instructions to install the
communication driver for the tool. Check
back occasionally for software updates.
Plug in the USB and turn
the board on using the
power switch. Run the Sensor
Toolbox link on your desktop.
Explore other compatible kits at
www.freescale.com/sensortoolbox
STEP
1
STEP
2
STEP
3

Get to know the LFSTBEB7361 board
Power LED
Reset Switch
Freescale
MMA7361L
3 x 5 x 1 mm LGA
Freescale
MC9S08QE8CWL
Accelerometer Development Board
SENSOR TOOLBOX
Freescale and the Freescale logo are trademarks or registered
trademarks of Freescale Semiconductor, Inc. in the U.S. and other
countries. All other product or service names are the property of
their respective owners. © Freescale Semiconductor, Inc. 2009.
Doc Number: LFSBEB7361ACCQSG / REV 0
Agile Number: 926-78350 / REV A
Learn more at www.freescale.com/sensortoolbox.