Nyrius WS54RX User manual

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions,may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
SAFTEY INFORMATION
WS54RX QUICK START GUIDE WS54RX QUICK START GUIDE
For additional product information, please consult the manual at:NYRIUS.COM/SUPPORT

WS54RX QUICK START GUIDE
04 ACTIVATED
05 PAIR TRANSMITTER
06 CONNECTED
WS54RX QUICK START GUIDE
* Obstacles may decrease transmission distance. Interference may come from other wireless devices using 5GHz band.
* For maximum performance, please use the included power adapters.
01 RECEIVER SET UP
02 TV SET UP
03 PAIRING
RECEIVER
HDTV
ENSURE YOUR WS54 RECEIVER IS
POWERED ON AND CONNECTED
TO YOUR TV VIA HDMI INPUT
SET YOUR TV/MONITOR TO
THE WS54’S HDMI INPUT
PRESS THE “PAIRING
BUTTON” ON THE FRONT
OF THE RECEIVER
THE TV/MONITOR SCREEN
WILL READ “PAIRING MODE
ACTIVATED, PLEASE PRESS
PAIRING BUTTON ON
FRONT OF TRANSMITTER”
PRESS THE “PAIRING BUTTON” ON
THE FRONT OF THE TRANSMITTER.
THE LED WILL NOW BEGIN TO
FLASH RED
ONCE THE TRANSMITTER HAS
BEEN PAIRED, THE TV/MONITOR
WILL READ “CONNECTED”
HDMI 1
HDMI 1
HDMI 1
CONNECTED
For additional product information, please consult the manual at:NYRIUS.COM/SUPPORT