OBD HOSTPOWER
OBD HOST
POWERBT
'Connect'
button
Android Quick Start Guide
OBDLink®LX Bluetooth
Android
Scan the QR code or visit the URL from your Android
device to download the OBDLink app:
obdlink.com/app
Download & install OBDLink app
The OBD port is usually found on the driver’s side,
under the dash.
‘POWER’ LED will turn ON, and the ‘BT’ LED will
start ashing slowly.
You must complete steps 7, 8, and
9 within 2 minutes. If you need
more time, press the button again.
Attention!
The ‘BT’ LED will switch to a fast blink.
Tap ‘Scan’ if OBDLink LX does not show in ‘Available
devices’.
– LEDs are o? Check vehicle for blown fuses.
[instructions continue on reverse]
Plug OBDLink LX into the OBD port
Turn ignition to Key On, Engine O
position
Open ‘Settings’ app, and enable
‘Bluetooth’
Press and release the ‘Connect’ button
on OBDLink LX
Tap ‘OBDLink LX’ to pair the deviceTap ‘Bluetooth - Pair with a device’
Wait for OBDLink LX to appear on the
‘Available devices’ list
1
2
3
4
6
85
7
Vehicles with push button start: press the button without
stepping on the brake pedal.
