OBDLink MX Wi-Fi User manual

. .
Wi-Fi Key:
OBD HOSTPOWERWi-Fi
OB
D
H
Wi-Fi
LOCK
ACC ON START
‘POWER’ LED will turn ON, and the white ‘Wi-Fi’ LED
will emit a ash every 3 seconds.
– LEDs are o? Check vehicle for blown fuses.
Vehicles with push button start: press the button without
stepping on the brake pedal.
Android Quick Start Guide
OBDLink MX Wi-Fi
Android
2
1
4
Scan the QR code or visit the URL from your Android
device to download the OBDLink app:
The factory default Wi-Fi Key is found on the bottom
of the unit. It is lowercase and includes periods.
obdlink.com/app
Download & install OBDLink app Turn ignition to Key On, Engine O
position
Write down the 14-digit Wi-Fi Key
[instructions continue on reverse ]
The DLC is usually found on the driver’s side, under
the dash.
– Can’t nd your DLC? Visit dlc-locator.com
3Plug MX Wi-Fi into the diagnostic link
connector (DLC) 5Open ‘Settings’ app, and tap ‘Wi-Fi’

Thank you for your purchase!
If you like OBDLink MX Wi-Fi,
please post your review on
9Launch OBDLink app, tap ‘Connect’
8Enter the Wi-Fi Key from step #1 in the
‘Password’ eld, and tap ‘Connect’
– Need help? Go to obdlink.com/support
or scan the QR code
– For advanced configurations, go to obdlink.com/setup
or scan the QR code
6Turn Wi-Fi on
7Select ‘OBDLink MX’from the list of
networks
The network status will change to ‘Connected,’ and
the ‘Wi-Fi’ LED will change to a slow blink.
– Remember that the Password is lowercase and
includes periods.
OBD HOSTPOWERWi-Fi
10 Choose ‘Wi-Fi’
Once the app establishes a connection with MX, the
‘Wi-Fi’ LED will turn on solid. Tap ‘Diagnostics’ to
start a scan.