OCL DLC-1.1 User manual

Copyright 2018 | All Rights Reserved http://www.ocl-lighting.com
AUX
READ BEFORE USE
Thank you for purchasing the OCL DLC1.1 Digital Lighting controller.
Please read and understand this manual completely before using the product. Only use the product as specied in this manual.
CONTENTS
•OCL Aux Box with local power plug
•2x inlet sockets max 16A (Plug & Play)
•Manual
PRODUCT DETAILS AND SPECIFICATIONS:
Maximum allowable current: 16Amps
Maximum voltage: 240volt AC
Maximum allowable power: 3.5KW
Relative humidity: 25-70% (non-condensing)
Operating temperature: 0-35 Celsius / 32-95 Fahrenheit
Warranty: 3 years
OCL LIGHTING DLC 1.1 AUX BOX

Copyright 2018 | All Rights Reserved
VISIT US
HTTP://WWW.OCL-LIGHTING.COM
PRODUCT DESCRIPTION
With the “AUX BOX” [1], to be ordered separately, it is possible to connect a humidier [2] a dehumidier [3], extra ventilation or heating etc.
The “AUX BOX” is equipped with a RJ12 Connector (Plug & Play) and a 16A (Flip/Flop) relay. The relay switches between “DAY” setting
and “NIGHT” setting when a “LIGHT TIMER CYCLE” ends. During the “DAY” setting a humidier can be connected and during
the “NIGHT CYCLE” a dehumidier, a heater etc.
INSTALLING THE AUX BOX
With the “AUX SELECT” option it is possible to make a choice which piece of equipment to connect.
Press setting key, choose “AUX SELECT”, press setting key again, you can now change the setting “AUX SELECT” by using the up
and down key. Then press setting key again, this will conrm the function and return to the main menu. If not, please press ESC key.
O : “AUX” port closed.
Day: Ballast opened, “AUX” port opened, inlet socket [A] opened; ballast closed, inlet socket [B] opened (Flip/Flop)
Night: Ballast opened, “AUX” port closed, ballast closed, inlet socket [A] opened, ballast opened, inlet socket [B] opened (Flip/Flop)
When growing with CO2, extra dehumidication of the room may be required due to increased evaporation.
1
23