OE electrics QikBOX User manual

QIKBOX Assembly instructions
INSTR1209
www.oeelectrics.com
[email protected] / [phone]DE -
[email protected] / 1300 ELSAFE (357 233)AUS - [email protected] / [phone]U.S.A -
[email protected] / [phone]
UK -
1Identify if ribs need removing prior to adding power/data/
AV to QIKBOX
Ribs don’t need removing
Ribs do need removing
QF5 data/AV
Power Module
+ TUF
Power Module
+ QF5 Data/AV
2 x Power
Module

QIKBOX Assembly instructions
INSTR1209
www.oeelectrics.com
[email protected] / [phone]DE -
[email protected] / 1300 ELSAFE (357 233)AUS - [email protected] / [phone]U.S.A -
[email protected] / [phone]
UK -
2Attach mounting clips to QIKBOX
4Align QIKBOX with surface and screw into
place 5Add modules to QIKBOX
6Add power cable
Left
Right
For QIKBOX with 2 x power modules see next page
22.0
44.0
263.5
22.0
44.0
263.5
3
Mark mounting holes. Use No.10 pan
head screws.Length dependent on surface
mounted to.

QIKBOX Assembly instructions
INSTR1209
www.oeelectrics.com
[email protected] / [phone]DE -
[email protected] / 1300 ELSAFE (357 233)AUS - [email protected] / [phone]U.S.A -
[email protected] / [phone]
UK -
2Attach mounting clips to QIKBOX
4Align QIKBOX with surface
and screw into place 5Add modules to QIKBOX, align to right hand side rst
7Add power cable
Left
Right
These instructions are for 2 x power modules only! *NOTE: If using QF Power Modules please see
INSTR1213 - Fitting 2 x QikFit Modules Together.pdf or view the video here: QikFit Power Modules
6QF1 spacer required at
right hand side
3
Mark mounting holes. Use No.10 pan
head screws.Length dependent on surface
mounted to.
22.0
44.0
263.5
22.0
44.0
263.5