Office Star Products 183305 User manual

183305 / 183405 / 183905
SCREEN BACK VISITOR’S CHAIR
OPERATING INSTRUCTIONS
183305
183405
183905
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight
every three months or as needed.
4. Dispose of packing material properly. Do not
use plastic cover as head covering. It may
cause suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.
LIMITED WARRANTY
Office Star Reception Seating is warranted from the date of purchase against failure due to material and workmanship as follows:
• 5 Years on Structural integrity of frame.
• 3 Years on wood finishes.
• 1 Year on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against scratching and scuffing, as leather is subject to minor blemishes in use. Minor variations
in color, texture and grain are a natural part of leather hides, and therefore are not covered by this warranty.
All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. The BC9601 is for persons weighing 300 lbs. or less. The BC9602 is for persons weighing 400 lbs. or less. The BC9603 is for persons weighing 500 lbs.
or less. EX1098, EC1283C & ECH12801 are for persons weighing 350 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse,
negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover
cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting
from use of this product. When usage is more than 40 hours per week, a two year warranty on all parts applies. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.

© Office Star Products March 2014
PA R T QTY
1. Back ........................1
2. Seat ........................1
3. Arms (3L & 3R) ...............2
4. Short Screws .................2
5. Medium Screws ...............2
6. Front Leg ....................1
7. Rear Leg ....................1
8. Long Screws .................4
9. Extra Screws .................4
10. Flat Brace ..................2
11. Allen Wrench (not shown) ......1
Remove all parts from carton, separate by part numbers indicated on parts list, and
verify part quantities.
STEP 1 Using four Long Screws (8), and two Flat Braces (10) join Front Leg (6) and Rear Leg (7)
together, Attach assembled legs to Seat (2) using four Extra Long Screws (9),
SEE DETAIL A. FULLY TIGHTEN SCREWS.
STEP 2 Slide Back (1) onto Rear Leg (7), Attach Arms (3L & 3R) to assembled legs. Secure
Arms (3L & 3R) and Seat (2) and Back (1) using two Short Screws (4), and two Medium Screws (5), SEE
DETAIL B.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE
USING CHAIR.
DETAIL A
1
6
6
9
9
7
8,10
7
2
3L
3L
5
5
4
4
DETAIL B
3R
8
2
10
183305 / 183405 / 183905
SCREEN BACK VISITOR’S CHAIR
ASSEMBLY INSTRUCTIONS